Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns MF-SM200-2-99 is a PTC resettable fuse with 15V URac, 1.9W power dissipation, and -40 to 85°C operating temperature range. It's used for overload protection in various applications due to its dual-ended terminals and rectangular package design suitable for surface mounting method.
Median Price
$0.067
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Arrow
1+ parts
$0.003
100+ parts
1k+ parts
-
10k+ parts
Verical
$0.429
Chip1Stop
Nova Conductors
$0.226
Electro Sonic
$0.384
$0.326
Bristol Electronics
$0.750
$0.375
$0.150
ComSIT USA
ComSIT Distribution GmbH
Vyrian
Dan-Mar Components
ACDS - Activité Composants Distribution Service
North Shore Components
Semtec, LLC
Holdelec - ElecDif-Pro
Semi Source
J2 Sourcing AB
Component Stockers USA
$0.090
$0.080
$0.370
Netroflash
AZTECH Wire
$11.260
Perfect Parts
Kepictronics
This feature allows the thermistor to function as an overload protection device, providing an additional layer of safety in electronic circuits.
Dual ended terminal placement ensures easy and secure connections, making it convenient for installation and maintenance.
The rectangular package design offers compactness and efficiency in space utilization, making it suitable for various applications where space is limited.
TR packing method ensures reliability and ease of handling during storage and transportation, ensuring the product reaches the end user in good condition.
With a rated AC voltage of 15V, this thermistor is suitable for applications requiring protection against voltages within this range, providing efficient performance.
The maximum operating temperature of 85°C allows the thermistor to withstand high temperature environments, enhancing its durability and reliability.
The minimum operating temperature of -40°C ensures the thermistor can effectively function in low temperature conditions, making it versatile for various applications.
The matte tin finish with nickel barrier provides excellent conductivity and corrosion resistance, ensuring long-term performance and reliability of the thermistor.
With a rated power dissipation of 1.9W, this thermistor can handle moderate power levels, making it suitable for applications where power dissipation is a concern.
The surface mounting type offers easy installation on PCBs, saving space and providing a secure connection, making it ideal for compact electronic devices.
Non-linear Resistors MF-SM200-2-99 attributes and parameters. Explore more Non-linear Resistors devices from Bourns
Additional Features:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Width (Package):
Packing Method:
Rated AC Voltage (URac):
Rated Power Dissipation (P):
Resistor Type:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Thermistor Application:
MF-SM200-2-99 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
PCN Obsolescence/ EOL - Select Multifuse Parts With -99 Suffix 06/Jun/2018
PCN Design/Specification - MF Cert Mark Aug/2015 MF-SM(250), SMHT Series Cover Tape Nov/2010
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
1N4148
Shandong Yiguang Electronic Joint Stock
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MBRM140T1G
Onsemi
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
SMBJ18CA
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
LL4148
First Components International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Sensitron Semiconductor
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
BAV99
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
Lite-on Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
Continental Device India
1N4148WS
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
GA1K2A1
TE Connectivity
TE Connectivity's GA1K2A1 is a non-linear resistor with 2 terminals, operating b/w -40°C to 125°C. With a length of 76mm, it is used for temperature sensing applications.
SMD050F-2
Littelfuse
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .35 ohm; Maximum Operating Temperature: 85 Cel; Terminal Shape: FLAT; Maximum Circuit DC Voltage: 60 V;
1812L075PR
1812L075PR by Littelfuse is a PTC resettable fuse with resistance of 0.1 ohm. It features dual-ended terminals and is used for overcurrent protection in SMT applications. With a rectangular package measuring 4.73mm x 3.41mm x 0.75mm, it operates b/w -40°C to 85°C and has a max circuit DC voltage of 13.2V.
NTCS0805E3103FHT
Vishay Bc Components
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .21 W; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %;
ASMD075F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .29 ohm; Maximum Operating Temperature: 85 Cel; Thermistor Application: OVERCURRENT PROTECTION; Terminal Finish: Tin (Sn);
MF-RX160/72-0
Bourns
The Bourns MF-RX160/72-0 is a PTC resettable fuse with resistance of 0.09 ohm and operating voltage of 72V. It is used for overcurrent protection in applications requiring radial terminal placement and through-hole mounting, with reference standards including CUL, TUV, and UL certifications.
197-103LAG-A01
Fenwal Electronics
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 125 Cel; No. of Terminals: 2; Minimum Operating Temperature: -60 Cel;
MF-USMF010-2
The Bourns MF-USMF010-2 is a PTC resettable fuse with resistance of 0.8 ohm, operating voltage of 30V, and dual-ended terminals in a rectangular SMT package. It is used for overcurrent protection applications, featuring gold over nickel terminal finish and AEC-Q200, CUL, TUV, UL standards compliance.
V82ZA20PX1347
V82ZA20PX1347 by Littelfuse is a VARISTOR with 68V operating voltage and 50V max circuit RMS voltage. It has a max energy absorption of 25J, suitable for non-linear resistor applications. With a temperature range from -55°C to 150°C, it features radial terminal placement and metal oxide film technology.
B72500D0150A060
TDK
The TDK B72500D0150A060 is a VARISTOR with 15V operating voltage, -40 to 85°C temp range, and DUAL ENDED terminals. Ideal for surge protection in SMT applications due to its compact size (1.75mm x 0.9mm) and surface mounting type.
MF-R030
Bourns MF-R030 is a PTC resettable fuse with resistance of 0.76 ohm, operating voltage of 60V, and temperature range from -40 to 85°C. It has radial terminal placement and wire shape, suitable for through hole mounting applications in various electronic circuits.
PTFL04BG471Q2N34B0
Murata Manufacturing
Murata Manufacturing's PTFL04BG471Q2N34B0 is a PTC thermistor with 470 ohm resistance, rated for 16V AC. It is used for temperature sensing applications, featuring radial terminal placement and disk package shape. Operating b/w -10°C to 80°C, it has UL and CUL certifications.
MF-SMDF050-2
The Bourns MF-SMDF050-2 is a PTC resettable fuse with resistance of 0.2 ohm and operating voltage of 60V. It features dual-ended terminals, SMT package style, and gold over nickel terminal finish. Ideal for applications requiring protection against overcurrent events in electronic circuits.
B72220-S300-K101
The TDK B72220-S300-K101 is a VARISTOR with 26J energy capacity, 30V RMS voltage, and -40 to 85°C operating range. Its RADIAL terminals make it suitable for THROUGH HOLE MOUNT applications requiring surge protection in various electronic circuits.
0ZCF0075AF2C
Bel Fuse
Bel Fuse's 0ZCF0075AF2C is a PTC resettable fuse with resistance of 0.18 ohm, operating voltage of 60V, and max circuit DC voltage of 60V. It is used for temperature sensing applications with dual-ended terminals in surface mount package style.
DFP10112
DFP10112 by TDK is a PTC resettable fuse with 10 ohm resistance, 5% tolerance, and 1.6W power dissipation. It is used for temperature sensing applications with radial terminal placement in a rectangular package.
NTCG103JF103FT1S
NTCG103JF103FT1S by TDK is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and 5V operating voltage. Ideal for temperature sensing applications due to its high thermal sensitivity index of 3435 K and AEC-Q200 reference standard compliance. Package style is SMT with dual-ended terminals for surface mounting type.
SMD075F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .35 ohm; Maximum Operating Temperature: 85 Cel; Thermistor Application: OVERCURRENT PROTECTION; Length (Package): 7.98 mm;
B59707A0120A062
TDK's B59707A0120A062 is a PTC thermistor with 75 ohm resistance, rated for 80V AC/DC. It features dual-ended terminals and wraparound shape, suitable for overcurrent protection applications. Operating temperature ranges from -40 to 125°C, making it ideal for surface mount installations in various electronic devices.
MF-RX375
The Bourns MF-RX375 is a PTC resettable fuse with resistance of 0.03 ohm, operating voltage of 60V, and max circuit DC voltage of 60V. It is used for overcurrent protection in applications requiring radial terminal placement and disk package shape. With reference standards CUL, TUV, UL, it offers temp range -40 to 85°C for bulk packing via through hole mount.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MF-SM050-2-99
The Bourns MF-SM050-2-99 is a PTC resettable fuse with a rated power dissipation of 1.7W and rated AC voltage of 60V. It is used for overload protection in various applications, featuring dual-ended terminals and a rectangular package for surface mounting. Operating temperatures range from -40°C to 85°C, making it suitable for diverse environments.
MF-SM050-2
The Bourns MF-SM050-2 is a PTC resettable fuse with a resistance of 0.35 ohm and an operating voltage of 60V. It is used for overcurrent protection in various applications, featuring dual-ended terminal placement and a rectangular SMT package.
MF-SM185/33-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .04 ohm; Maximum Operating Temperature: 85 Cel; Package Style (Meter): SMT; Height (Package): 3 mm;
MF-SM150/33-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .06 ohm; Maximum Operating Temperature: 85 Cel; Additional Features: RMIN AT 23 DEG CEL; Minimum Operating Temperature: -40 Cel;
MF-SM100-2
The Bourns MF-SM100-2 is a PTC resettable fuse with resistance of 0.12 ohm and operating voltage of 30V. It is used for overcurrent protection in applications requiring dual-ended terminal placement and surface mounting type. The rectangular package measures 7.98mm x 5.44mm x 3mm, suitable for various electronic devices meeting AEC-Q200, CUL, TUV, and UL standards.
MF-SM100/33-2
The Bourns MF-SM100/33-2 is a PTC resettable fuse with resistance of 0.12 ohm, operating voltage of 33V, and dual-ended terminal placement. It is used for overcurrent protection in various applications due to its SMT package style and AEC-Q200, CUL, TUV, UL reference standards compliance.
MF-SM075/60-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .23 ohm; Maximum Operating Temperature: 85 Cel; Thermistor Application: OVERCURRENT PROTECTION; Terminal Shape: FLAT;
MF-SM030-2
The Bourns MF-SM030-2 is a PTC resettable fuse with resistance of 0.9 ohm, operating voltage of 60V, and max temp of 85°C. It's used for overcurrent protection in SMT applications with dual-ended terminals and rectangular package shape.
MF-SM100-2-99
The Bourns MF-SM100-2-99 is a PTC resettable fuse with a resistance of 0.48 ohm and rated AC voltage of 30V. It is used for overload protection in various applications, featuring dual-ended terminal placement and a rectangular package shape.
MF-SM250-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .024 ohm; Maximum Operating Temperature: 85 Cel; Terminal Finish: MATTE TIN OVER NICKEL; Terminal Placement: DUAL ENDED;
MF-SM030-2-99
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): 1.7 W; Maximum Operating Temperature: 85 Cel; Additional Features: 0.9 TO 4.8 OHMS AT 23 DEG CEL; Terminal Placement: DUAL ENDED;
MF-SM100/33-2-99
The Bourns MF-SM100/33-2-99 is a PTC resettable fuse with 33V URac, 1.7W power dissipation, and -40 to 85°C operating range. It's used for overload protection in surface mount applications with dual-ended terminals in a rectangular package.
MF-SM150-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .06 ohm; Maximum Operating Temperature: 85 Cel; Terminal Shape: FLAT; No. of Terminals: 2;
MF-SM075-2-99
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 1 ohm; Rated Power Dissipation (P): 1.7 W; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3;
MF-SM075/60-2-99
Bourns MF-SM075/60-2-99 is a PTC resettable fuse with 60V URac, 1.7W power dissipation, and -40 to 85°C operating range. It's used for overload protection in various applications due to its dual-ended terminals and surface mounting type.
MF-SM075-2
Bourns MF-SM075-2 is a PTC resettable fuse with resistance of 0.23 ohm, operating voltage of 30V, and dual-ended terminals. Ideal for overcurrent protection in various applications due to its SMT package style, matte tin finish, and AEC-Q200 reference standard compliance.
MF-SMDF050
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .2 ohm; Rated Power Dissipation (P): .9 W; Maximum Operating Temperature: 85 Cel; Additional Features: RMIN AT 23 DEG CEL;
MF-SM250-2-99
The Bourns MF-SM250-2-99 is a PTC resettable fuse with dual-ended terminals and a rectangular package. It is used for overload protection in applications with a rated AC voltage of 15V. With a max operating temperature of 85°C and a rated power dissipation of 1.9W, it provides reliable performance in surface mount installations.
MF-SM125-2
Bourns MF-SM125-2 is a PTC resettable fuse with resistance of 0.07 ohm, operating voltage of 15V, and dual-ended terminals. Ideal for overcurrent protection in various applications due to its SMT package style, matte tin finish, and AEC-Q200 reference standard compliance. Operating temperature range from -40°C to 85°C makes it suitable for diverse environments.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved