Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Bourns MF-R400-AP-99 is a PTC resettable fuse with 2 terminals, operating voltage of 30V, and max circuit DC voltage of 30V. It is used for overcurrent protection in applications requiring radial terminal placement and disk package shape. With reference standards including CUL, TUV, and UL, it offers a temperature range from -40°C to 85°C.
Median Price
$0.436
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Master Electronics
1+ parts
-
100+ parts
1k+ parts
10k+ parts
$0.411
Verical
$0.460
Nova Conductors
$0.430
Bristol Electronics
$1.208
$0.447
$0.314
Vyrian
Electro Sonic
$0.726
$0.415
Dan-Mar Components
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
Netroflash
AZTECH Wire
$1.490
$1.430
$1.400
$1.370
This thermistor is designed specifically for overcurrent protection applications, ensuring the safety and stability of the electrical circuit.
Radial terminal placement allows for easy and secure connection in circuits, making installation and maintenance convenient.
Wire terminals provide a reliable and durable connection, reducing the risk of disconnection or damage during operation.
With a high maximum operating temperature of 85°C, this thermistor can withstand elevated temperatures without compromising performance.
The operating voltage of 30 volts makes this thermistor suitable for a wide range of applications, providing flexibility and versatility.
Through-hole mounting offers stability and secure attachment to the circuit board, ensuring reliable performance in various conditions.
Compliance with recognized standards such as CUL, TUV, and UL ensures quality, safety, and reliability of the thermistor.
Non-linear Resistors MF-R400-AP-99 attributes and parameters. Explore more Non-linear Resistors devices from Bourns
Additional Features:
Maximum Circuit DC Voltage:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Reference Standard:
Resistor Type:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Thermistor Application:
Operating Voltage:
MF-R400-AP-99 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
PCN Obsolescence/ EOL - Select Multifuse Parts With -99 Suffix 06/Jun/2018
PCN Design/Specification - MF Cert Mark Aug/2015
PCN Packaging - Polymer PTC 18/Dec/2018
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
1N4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDV304P
Onsemi
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
Hy Electronic
LL4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Toshiba
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
2N7002
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
M24308/2-1F
Souriau
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; MIL Conformity: YES;
National Semiconductor
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
1N4148WS
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Cheng-yi Electronic
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
B57364-S109-M
Siemens
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1 ohm; Shape (Package): DISK PACKAGE; Terminal Shape: WIRE; No. of Terminals: 2;
B72220P3301K101
TDK
The TDK B72220P3301K101 is a VARISTOR with 305J energy capacity, 385V operating voltage, and 1W power dissipation. It is used for surge protection in circuits with up to 300V RMS voltage. Ideal for applications requiring high transient voltage suppression in radial through-hole mounting setups.
RUEF400-1
Littelfuse
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .05 ohm; Rated Power Dissipation (P): 2.5 W; Maximum Operating Temperature: 85 Cel; Rated AC Voltage (URac): 30 V;
B57861S0104F040
B57861S0104F040 by TDK is a NTC thermistor with 100k ohm resistance, 1% tolerance, and 4540 K thermal sensitivity index. It is used for temperature sensing applications in environments ranging from -55°C to 155°C. The thermistor has a disk package shape, radial terminal placement, and wire terminals for through hole mounting.
MF-R110-2-99
Bourns
The Bourns MF-R110-2-99 is a PTC resettable fuse with 30V operating voltage and -40 to 85°C temperature range. It features radial terminal placement, matte tin finish, and disk package shape. Ideal for overcurrent protection applications, it meets CUL, TUV, and UL standards.
V5.5MLA0603H
V5.5MLA0603H by Littelfuse is a chip varistor with a max operating temperature of 125°C and rated power dissipation of 0.05W. It is used for surge protection in electronic circuits with an operating voltage of 5.5V and max circuit RMS voltage of 6.5V, making it suitable for surface mount applications.
0ZCG0150BF2C
Bel Fuse
Bel Fuse's 0ZCG0150BF2C is a PTC resettable fuse with resistance of 0.04 ohm and rated power dissipation of 1W. It is used for temperature sensing applications, featuring dual-ended terminals and surface mounting type. Operating voltage is 24V with operating temperature range from -40 to 85°C.
PESD0402-140
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Packing Method: BULK; TR, 7 INCH; Width (Package): .6 mm; Operating Voltage: 14 V;
MF-SM150-2
The Bourns MF-SM150-2 is a PTC resettable fuse with resistance of 0.06 ohm and operating voltage of 15V. It features dual-ended terminals, SMT package style, and matte tin finish. Ideal for overcurrent protection applications, it has a temperature range from -40 to 85°C and meets AEC-Q200, CUL, TUV, and UL standards.
V275LA40APX10
V275LA40APX10 by Littelfuse is a 275V varistor with 140J energy capacity. It operates b/w -55°C to 125°C, ideal for temperature compensation applications. With radial terminal placement and metal oxide film technology, it offers reliable protection in bulk packaging.
NTCS0603E3103FHT
Vishay Bc Components
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %;
V5.5MLA0805NH
Harris Semiconductor
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Terminal Placement: DUAL ENDED; Length (Package): 3.05 mm; JESD-609 Code: e3;
0ZCM0005FF2G
Bel Fuse's 0ZCM0005FF2G is a PTC resettable fuse with resistance of 3.8 ohm, operating voltage of 15V, and max circuit DC voltage of 15V. It is used in non-linear resistor applications with dual-ended terminal placement and surface mounting type.
B59451C1130B070
The TDK B59451C1130B070 is a PTC thermistor with 56 ohm resistance and 440V operating voltage. It is used for overcurrent protection in applications requiring radial terminal placement and disk package shape. With AEC-Q200 reference standard, it offers -40 to 125 °C operating temperature range.
RF1256-000
VARISTOR; Terminal Finish: MATTE TIN OVER NICKEL; Manufacturer Series: PESD; JESD-609 Code: e3;
MF-MSMF110/16-2
The Bourns MF-MSMF110/16-2 is a PTC resettable fuse with resistance of 0.04 ohm and operating voltage of 16V. It is used for overcurrent protection in various applications, featuring dual-ended terminals and SMT package style for surface mounting. The device has a temperature range from -40°C to 85°C and meets standards like AEC-Q200, CUL, TUV, and UL.
NTC0805J10K
TE Connectivity
TE Connectivity's NTC0805J10K is a 10000 ohm NTC thermistor with -55 to 125 °C operating range and 5% tolerance. It has dual-ended terminals, measures 2mm x 1.25 x 0.5mm, and is used for temperature sensing applications in surface mount configurations.
RXEF075-AP
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; No. of Terminals: 2; Terminal Placement: RADIAL; Terminal Shape: WIRE;
EZJZ0V800AA
Panasonic
The Panasonic EZJZ0V800AA is a varistor resistor with dual-ended terminals, SMT package style, and matte tin finish. It operates at temperatures from -40 to 85°C and has a max voltage of 18V DC. Ideal for surface mount applications requiring protection against voltage surges.
B72220-S251-K101
The TDK B72220-S251-K101 is a VARISTOR with 140J energy capacity, 250V RMS voltage, and 320V operating voltage. Ideal for surge protection in circuits with temperatures ranging from -40 to 85°C. Its radial terminal placement and disk package make it suitable for through-hole mounting applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MF-R400
The Bourns MF-R400 is a PTC resettable fuse with resistance of 0.01 ohm and operating voltage of 30V. It has radial terminal placement, matte tin finish, and operates b/w -40 to 85°C. Ideal for overcurrent protection in various electronic applications.
MF-R400-2
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .01 ohm; Maximum Operating Temperature: 85 Cel; Shape (Package): RECTANGULAR PACKAGE; Length (Package): 14.4 mm;
MF-R400-2-99
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Thermistor Application: OVERCURRENT PROTECTION; Shape (Package): RECTANGULAR PACKAGE; No. of Terminals: 2;
MF-R400-AP
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .01 ohm; Maximum Operating Temperature: 85 Cel; No. of Terminals: 2; Package Style (Meter): Radial;
MF-R400-2-14
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .01 ohm; Maximum Operating Temperature: 85 Cel; Additional Features: RMIN AT 23 DEG CEL; JESD-609 Code: e3;
MF-R400-0-14
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .01 ohm; Maximum Operating Temperature: 85 Cel; Terminal Placement: RADIAL; Terminal Shape: WIRE;
MF-R400-0-99
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Packing Method: Bulk; Length (Package): 14.4 mm; Width (Package): 3 mm;
MF-R400-AP-14
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .01 ohm; Maximum Operating Temperature: 85 Cel; Operating Voltage: 30 V; Additional Features: RMIN AT 23 DEG CEL;
MF-R400--99
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Maximum Circuit DC Voltage: 30 V; Operating Voltage: 30 V; Thermistor Application: OVERCURRENT PROTECTION;
MF-R400-0-17
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .01 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Additional Features: RMIN AT 23 DEG CEL;
MF-R400-0
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .01 ohm; Maximum Operating Temperature: 85 Cel; Package Style (Meter): Radial; Reference Standard: CUL; TUV;
MF-R400-2-17
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .01 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Package Style (Meter): Radial;
MF-R400-AP-17
MF-R400--14
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Thermistor Application: OVERCURRENT PROTECTION; Reference Standard: CUL, TUV, UL; Maximum Circuit DC Voltage: 30 V;
MF-R400--17
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; No. of Terminals: 2; Terminal Finish: Matte Tin (Sn); Length (Package): 14.4 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved