Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns HCTSM80308BALE1 is a pulse transformer with 5000V isolation voltage, 300uH inductance, and 3:8 turns ratio. AEC-Q200 and IEC approved, it operates b/w -40°C to 125°C. Ideal for datacom applications due to its compact size and surface mount feature.
Median Price
$3.010
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Verical
1+ parts
$1.680
100+ parts
-
1k+ parts
$1.510
10k+ parts
Master Electronics
$4.675
$3.142
$2.820
Mouser Electronics
$2.850
IBS Electronics
$6.557
$4.407
$3.955
Nova Conductors
Ampacity Inc.
$2.560
Neutron USA
$98.810
Authorized Procurement Solutions
Aranea Global
Having AEC-Q200 and IEC approvals ensures that this product meets high automotive safety and quality standards.
With an isolation voltage of 5000V, this transformer provides excellent isolation protection for sensitive components.
High inductance of 300 uH helps in efficient energy transfer and filtering in pulse and datacom applications.
TR, 13 INCH packing method ensures easy handling and storage of the transformers.
A minimum ET product of 11V-us indicates high efficiency and performance in transferring energy signals.
With a maximum operating temperature of 125°C, the transformer can withstand high temperature environments.
With a minimum operating temperature of -40°C, this transformer is suitable for use in a wide range of temperature conditions.
With a compact size of 6.5mm height, 10.8mm width, and 12.3mm length, this transformer can be easily integrated into various electronic devices.
Being a pulse transformer, this product is specifically designed for pulse and datacom applications, ensuring optimal performance.
With a surface mounting feature, installation of this transformer is convenient and saves space on the PCB.
The 3:8 turns ratio ensures proper voltage transformation and impedance matching in the circuit, enhancing signal integrity.
Pulse & Datacom Transformers HCTSM80308BALE1 attributes and parameters. Explore more Pulse & Datacom Transformers devices from Bourns
Approvals (V):
Minimum ET Product:
Height:
Isolation Voltage:
Length:
Mounting Feature:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Inductance (Primary):
Transformer Type:
Turns Ratio (Np:Ns):
Width:
HCTSM80308BALE1 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MURS160T3G
Onsemi
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
1N4148WS
Rectron
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
ISO1050DUBR
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
2N2222A
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
MMSZ5245BT1G
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
M39029/58360
Souriau
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
2N7002
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
Taiwan Semiconductor
BAV99
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
Diotec Semiconductor Ag
DA2319-ALD
Coilcraft
Coilcraft's DA2319-ALD is a pulse transformer with 1500V isolation voltage and 296uH primary inductance. Ideal for gate drive applications, it operates b/w -40 to 125°C, with dimensions of L6.6xB5.0xH5.4mm and a turns ratio of 1:1 for surface mounting.
TG110-E055N5RLTR
Halo Electronics
Halo Electronics TG110-E055N5RLTR is a Datacom Transformer with 1500V isolation voltage, 0.4uH inductance, and 1CT:1CT turns ratio. Ideal for 10/100 BASE-TX and Ethernet applications, it operates b/w -40°C to 85°C. Measuring 6.35mm x 7.11mm x 12.7mm, it features surface mounting method and EN/UL approvals.
S558-5999-AB-F
Bel Fuse
Bel Fuse's S558-5999-AB-F is a DATACOM TRANSFORMER with inductance of 350uH. Measuring L15.24xB13.26xH6.35 (mm), it operates b/w -40 to 85 °C, ideal for ETHERNET applications due to its surface mount feature and turns ratio of 1CT:1CT; 1CT:1CT.
HM5149NLT
Pulse Electronics
HM5149NLT by Pulse Electronics is a DATACOM TRANSFORMER with 4 functions and an isolation voltage of 1500V. With inductance of 360uH, it operates b/w -40 to 125 °C, making it ideal for AEC-Q200 approved applications requiring high performance in a compact form factor.
750311625
Wuerth Elektronik & Kg
750311625 by Wurth Elektronik is a Datacom Transformer with 2 primary windings, 9uH inductance, and 1500V isolation voltage. It operates b/w -40 to 125°C, has a turns ratio of 4:1, and supports an output current of up to 4A. Ideal for surface mount applications in pulse and data communication systems.
IT364
Schaffner Holding Ag
IT364 by Schaffner Holding Ag is a UL approved Pulse Transformer with 3000V isolation voltage and 1700ns max pulse rise time. With primary inductance of 1500uH, it's ideal for datacom applications requiring high isolation and fast pulse response. Dimensions: L50.0xB50.0xH60.0 (mm), operating temp range -25 to 70 °C, turns ratio 1:1.
TG110-AEX50N5LF
TG110-AEX50N5LF by Halo Electronics is a pulse & datacom transformer with 1 function and an isolation voltage of 1500V. It has an inductance of 350uH and is suitable for applications such as 10/100 BASE-TX Ethernet.
PM-DB2745D+
Holt Integrated Circuits
PM-DB2745D+ by Holt Integrated Circuits is a DATACOM TRANSFORMER with MIL-STD-1553 approval. It has dimensions of L23.62xB16.0xH3.937 mm and operates b/w -55 to 130°C. Ideal for DATA BUS INTERFACE, it features a Turns Ratio of 1:2.5 and Matte Tin terminal finish for THROUGH HOLE MOUNTED installation.
1000B-5002XT
1000B-5002XT by Pulse Electronics is a Datacom Transformer with 4 functions, inductance of 350uH, and dimensions L17.53xB12.19xH5.72 (mm). It is used for 10/100/1000 BASE-T applications, operates b/w -55 to 125 °C, and has a turns ratio of 1:1; 1:1 for surface mount assembly.
HM6098NLT
HM6098NLT by Pulse Electronics is a Datacom Transformer with 4 functions, 1500V isolation voltage, and 120uH inductance. Ideal for surface mount applications, it operates b/w -40 to 105°C and has a turns ratio of 1:1.
DA102JC-R
Murata Manufacturing
Murata Manufacturing's DA102JC-R is a Pulse & Datacom Transformer with 2000V isolation voltage, 1900uH inductance, and 20 V-us min ET product. Ideal for data transmission applications, it operates b/w -40°C to 85°C and features surface mounting at dimensions of 6.35mm x 9mm x 9.52mm.
749010011
Wurth Elektronik 749010011 is a UL approved datacom transformer with 1500V isolation voltage and 350uH primary inductance. It is designed for LAN applications supporting 10/100 BASE-TX, with dimensions of 12.7mm x 6.855.08mm and operating temperatures ranging from 0 to 70°C.
HX5084NL
Pulse Electronics' HX5084NL is a Datacom Transformer with 1500V isolation voltage, 350uH inductance, and 1:1 turns ratio. Ideal for surface mount applications in data communication systems due to its compact L15.24xB7.62xH4.14 (mm) dimensions and -40 to 85°C operating temperature range.
78253/55MVC
C&d Technologies
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 78253; Terminal Finish: Tin (Sn); No. of Functions: 1; Application: GENERAL PURPOSE;
SM51589PEL
Bourns
Bourns SM51589PEL is a 4-function datacom transformer with 5000V isolation voltage and 350uH primary inductance. Ideal for 10/100/1000 BASE-T, Ethernet, and LAN applications. Compact at L17.55xB12.2xH6.0mm, surface mountable with Tin terminal finish for -40 to 85°C operation.
78613/8C
Murata Manufacturing's 78613/8C is a pulse transformer with 1000V isolation voltage, 1000uH inductance, and 15 V-us min ET product. It is used for datacom applications due to its through-hole mounting feature and compact dimensions of 6.35mm x 9mm x 9.52mm.
PM-DB2745L
Premier Magnetics
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-STD-1553; Dimensions: L16.0XB16.0XH3.937 (mm); Maximum Operating Temperature: 130 Cel; Width: 16 mm;
96046333019
Littelfuse
POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; No. of Functions: 2; Isolation Voltage: 1500 V; Length: 14.5 mm; Height: 13.5 mm;
749020010A
Wurth Elektronik's 749020010A is a Pulse & Datacom Transformer with UL approval and 1500V isolation voltage. It has 4 functions, 1dB insertion loss, and primary inductance of 350uH. Ideal for LAN applications like 1000 BASE-T, it operates b/w -40 to 85°C with dimensions L17.5xB14.20xH6.50mm for surface mounting.
100B-1003XNL
Inrcore
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Width: 6.98 mm; Length: 12.95 mm; Dimensions: L12.7XB6.73XH5.97 (mm);
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HCTSM80101AALE
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200, CUL, IEC, UL; Width: 10.8 mm; No. of Functions: 1; Inductance (Primary): 250 uH;
HCTSM80101AALE1
Bourns HCTSM80101AALE1 pulse transformer offers 5000V isolation voltage, 250uH inductance, and 1:1 turns ratio. Ideal for AEC-Q200 approved applications requiring high isolation and temperature range from -40 to 125°C. Suitable for surface mount with dimensions of 6.5x10.8x12.3mm, it is commonly used in datacom systems.
HCTSM100304FL-E
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Application: GENERAL PURPOSE; Length: 13.5 mm; Inductance (Primary): 400 uH; Turns Ratio (Np:Ns): 1:1.333;
HCTSM80403AALE1
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200, CUL, IEC, UL; Turns Ratio (Np:Ns): 4:3; Packing Method: TR, 13 INCH; Minimum ET Product: 11 V-us;
HCTSM150102HL-E
Bourns HCTSM150102HL-E is a DATACOM TRANSFORMER with 1:2 Turns Ratio, 7640V Isolation Voltage, and 80uH Inductance. Ideal for pulse & datacom applications, it operates b/w -40°C to 125°C temperatures in surface mount configurations.
HCTSM80304BALE1
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200, IEC; Inductance (Primary): 300 uH; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -40 Cel;
HCTSM80305BALE1
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200, IEC; Isolation Voltage: 5000 V; Packing Method: TR, 13 INCH; Minimum ET Product: 11 V-us;
HCTSM80809AALE1
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; IEC; UL; Turns Ratio (Np:Ns): 8:9; Minimum Operating Temperature: -40 Cel; Minimum ET Product: 11 V-us;
HCTSM80910BALE1
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200, IEC; Height: 6.5 mm; Inductance (Primary): 300 uH; Minimum Operating Temperature: -40 Cel;
HCTSM80102AALE1
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200, CUL, IEC, UL; Turns Ratio (Np:Ns): 1:2; Minimum ET Product: 11 V-us; Maximum Operating Temperature: 125 Cel;
HCTSM80102AALE
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200, CUL, IEC, UL; Maximum Operating Temperature: 125 Cel; Width: 10.8 mm; Minimum ET Product: 11 V-us;
HCTSM80201AALE1
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200, CUL, IEC, UL; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 125 Cel; Packing Method: TR, 13 INCH;
HCTSM80304BALE
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200, IEC; Isolation Voltage: 5000 V; Height: 6.5 mm; Maximum Operating Temperature: 125 Cel;
HCTSM80305BALE
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200, IEC; Minimum ET Product: 11 V-us; Inductance (Primary): 300 uH; Isolation Voltage: 5000 V;
HCTSM80308BALE
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200, IEC; Isolation Voltage: 5000 V; Inductance (Primary): 300 uH; Turns Ratio (Np:Ns): 3:8;
HCTSM80403AALE
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200, CUL, IEC, UL; Packing Method: TR, 13 INCH; Width: 10.8 mm; Isolation Voltage: 5000 V;
HCTSM80803AALE1
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200, CUL, IEC, UL; Width: 10.8 mm; Turns Ratio (Np:Ns): 8:3; Isolation Voltage: 5000 V;
HCTSM80803AALE
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200, CUL, IEC, UL; Length: 12.3 mm; Packing Method: TR, 13 INCH; Turns Ratio (Np:Ns): 8:3;
HCTSM80809AALE
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200, CUL, IEC, UL; Height: 6.5 mm; Inductance (Primary): 250 uH; Length: 12.3 mm;
HCTSM80910BALE
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200, IEC; Minimum ET Product: 11 V-us; Width: 10.8 mm; Length: 12.3 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved