Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns CAY16-681J4LF is a 680 ohm resistor network with 8 terminals, rated for 0.0625W power dissipation at temperatures from -55 to 125°C. Ideal for surface mount applications in electronics requiring isolated networks with a tolerance of 5%.
Median Price
$0.013
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Newark
1+ parts
$0.007
100+ parts
1k+ parts
-
10k+ parts
Arrow
$0.004
$0.002
Mouser Electronics
$0.100
$0.023
$0.016
$0.010
TTI Europe
$0.009
Verical
DigiKey
$0.011
Farnell
$0.033
$0.025
$0.019
Chip1Stop
$0.006
Element14
$0.031
$0.029
Nova Conductors
$0.017
Electro Sonic
IBS Electronics
$0.021
Vyrian
NAC Semi
ECAB
LIBRA Elektronik GmbH
ComSIT Distribution GmbH
Elcom Components
Argo Parts USA
Netroflash
Aztec Data Supply Inc.
$0.270
Corohmni
$0.310
Eastek
Perfect Parts
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
Abacus Technologies
Continental Prestige Electronics
$0.015
GreenTree Electronics
Low power dissipation helps in energy efficiency and reduces heat generation.
Suitable for use in a wide range of temperature conditions.
Allows for multiple functions in a single component, saving space and simplifying circuit design.
Uses advanced technology for reliable performance and accuracy.
Standard package shape for easy integration into circuit boards.
Compact and space-saving design.
Prevents interference between circuit elements for better performance.
Provides precise resistance value for specific applications.
Sufficient terminals for connecting to other components in a circuit.
Surface mount technology for easy and secure mounting on PCBs.
Secure connection points for reliable performance.
Can withstand high operating temperatures without degrading performance.
Suitable for use in extreme cold conditions.
Stable resistance value over a wide temperature range.
Provides a durable and corrosion-resistant finish for long-term use.
Low profile design for compact circuit layouts.
Combines multiple resistors in a single package for efficiency and space savings.
Suitable for applications with moderate voltage requirements.
Provides acceptable level of variation in resistance value.
Compact size for efficient use of space on PCBs.
Easy and secure mounting on PCBs for reliable performance.
Higher power dissipation rating allows for use in a wider range of applications.
Compact width for space-efficient PCB layouts.
Resistor Networks & Arrays CAY16-681J4LF attributes and parameters. Explore more Resistor Networks & Arrays devices from Bourns
Construction:
Element Power Dissipation:
First Element Resistance:
JESD-609 Code:
Mounting Type:
Network Type:
No. of Elements:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Resistor Type:
Second or Last Element Resistance:
Size Code:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
CAY16-681J4LF Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.21.00.20
SB
8533.21.00.25
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
1N4148
Dc Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
International Semiconductor
BAV99
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
Diodes Incorporated
Leshan Radio
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
LM358ADR
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
Weitron Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Philips Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
General Semiconductor
1N4148WT
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
YC124-JR-072K2L
Yageo
YC124-JR-072K2L by Yageo is a 4-function resistor array with resistance of 2200 ohm, operating voltage of 25V, and rated power dissipation of 0.0625W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and temperature range from -55 to 155 °C.
4606X-102-105LF
Bourns
Bourns 4606X-102-105LF resistor network features 3 functions, 1000000 ohm resistance, and 2.54 mm lead spacing. Ideal for applications requiring a 0.3 W power dissipation in isolated networks with a temperature range of -55 to 125 °C.
LT5400BCMS8E-5#PBF
LT5400BCMS8E-5#PBF by Analog Devices is a 4-function isolated resistor array with 0.8W power dissipation. Featuring 1ppm/°C temperature coef tracking, it has a resistance of 1000000 ohm and operates b/w -40 to 85 °C. Ideal for applications requiring precise resistance values in compact designs.
Y1747V0008QT9W
Vishay Intertechnology Y1747V0008QT9W is a DIP resistor array with 10000 ohm resistance, 0.02% tolerance, and 0.1 W power dissipation. Ideal for precision applications requiring high temperature stability and low TCR.
YC164-JR-074K7L
YC164-JR-074K7L by Yageo is a 4-function resistor array with resistance of 4700 ohm, operating voltage of 50V, and tolerance of 5%. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and temperature range from -55°C to 155°C.
BCN164AB220J7
Tt Electronics Plc
BCN164AB220J7 by Tt Electronics Plc is a 22 ohm resistor network with 0.063 W power dissipation and 70 °C rated temperature. Ideal for surface mount applications, it features METAL GLAZE/THICK FILM technology in a rectangular package, suitable for use in automotive electronics due to AEC-Q200 reference standard compliance.
767163472GP
Cts
767163472GP by Cts is a resistor network with 8 functions, 4700 ohm resistance, and 2% tolerance. It has a power dissipation of 0.2W and operates at temperatures ranging from -55 to 125 °C. Ideal for surface mount applications in electronic circuits requiring precise resistance values.
NOMCT16031003AT1
Vishay Intertechnology's NOMCT16031003AT1 resistor network features 100000 ohm resistance, 0.1 W power dissipation, and 5 ppm/°C temperature coef tracking. Ideal for applications requiring isolated thin film technology with rugged construction in SMT package style.
EXB2HV102JV
Panasonic
Panasonic EXB2HV102JV is a resistor network with 8 functions, each with 1000 ohm resistance. It has a power dissipation of 0.063W and operates b/w -55 to 125 °C. Ideal for SMT applications requiring isolated networks with a tolerance of 5%.
Y5076V0029AA0L
Vishay Foil Resistors
ARRAY/NETWORK RESISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 2000 ohm; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Tolerance: .05 %;
CAT16-470J4LF
CAT16-470J4LF by Bourns is a 47 ohm resistor network with 8 terminals, rated for 70 to 125 °C. It features 0.0625 W power dissipation, METAL GLAZE/THICK FILM tech, and SMT package style. Ideal for applications requiring isolated resistor networks in compact surface mount designs.
BCN164ABI182J7
BCN164ABI182J7 by Tt Electronics Plc is a 4-function resistor network with 1800 ohm resistance, 0.063 W power dissipation, and -55 to 155 °C operating temperature range. Ideal for surface mount applications in electronics requiring precise resistance values and compact design.
YC164-JR-07680RL
Yageo's YC164-JR-07680RL is a resistor network with 4 functions, each with 680 ohm resistance. Operating voltage of 50V and rated power dissipation of 0.0625W make it suitable for AEC-Q200 standard automotive applications. With a temperature coefficient of 200 ppm/°C, it can operate b/w -55 to 155 °C effectively.
4604X-101-472LF
Bourns 4604X-101-472LF resistor network features 3 elements with 4700 ohm resistance, rated at 0.2 W power dissipation. With a temperature coefficient of 100 ppm/°C, it is ideal for applications requiring precise tracking and operates b/w -55 to 125 °C temperatures. Suitable for through-hole mounting in various electronic circuits.
766161821GPTR7
766161821GPTR7 by Cts is a resistor network with 15 elements, each rated at 820 ohm resistance. It has a power dissipation of 1.2W and operates b/w -55 to 125 °C, making it suitable for various applications requiring precise resistance values in compact SMT packages.
BCN164A103J7
BCN164A103J7 by Tt Electronics Plc is a resistor network with 4 functions, 10000 ohm resistance, and 0.063 W power dissipation. It uses METAL GLAZE/THICK FILM technology in isolated network type for applications requiring a temperature range of -55 to 155 °C and operating voltage up to 50 V.
4609X-101-331LF
4609X-101-331LF by Bourns is a resistor network with 8 elements, each at 330 ohm resistance. It has a power dissipation of 0.2 W and operates b/w -55 to 125 °C. Ideal for applications requiring precise resistance values in compact spaces.
EXBV8V104JV
The Panasonic EXBV8V104JV is a resistor network with 4 functions, each with 100000 ohm resistance. It has a power dissipation of 0.063 W and operates b/w -55 to 125 °C. Ideal for SMT applications requiring isolated networks with 5% tolerance at 50 V.
LT5400BCMS8E-4#PBF
Linear Technology
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Tolerance: 7.5 %; No. of Elements: 1; Element Power Dissipation: .8 W;
BCN164A472J7
BCN164A472J7 by Tt Electronics Plc is a 4-function resistor network with a resistance of 4700 ohm and tolerance of 5%. It is used in applications requiring surface mount mounting type and can operate at temperatures ranging from -55 to 155 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CAY16-103J4LF
Bourns CAY16-103J4LF is a 10000 ohm resistor array with 0.0625 W power dissipation and 70 °C rated temperature. Ideal for surface mount applications, it features METAL GLAZE/THICK FILM technology in a rectangular package, suitable for various electronic circuits requiring precise resistance values.
CAY16-102J4LF
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
CAY16-472J4LF
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 4700 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
CAY16-49R9F4LF
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 49.9 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
CAY16-220J4LF
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 22 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
CAY17-103JALF
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
CAY16-1002F4LF
Bourns CAY16-1002F4LF is a 4-function resistor network with 10000 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in electronics requiring precise resistance values and high operating temperatures up to 125°C.
CAY16-331J4LF
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 330 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
CAY16-101J4LF
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
CAY16-104J4LF
Bourns CAY16-104J4LF resistor network has 4 functions with 100000 ohm resistance, 5% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in electronics requiring isolated networks with a temperature coefficient of 200 ppm/°C.
CAY16-4701F4LF
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 4700 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
CAY17-102JALF
CAY16-000J4LF
CAY16-000J4LF by Bourns is a 1206-sized resistor network with 4 functions and a power dissipation of 0.0625W. It is commonly used in surface mount applications where a jumper resistor type is required.
CAY16-1001F4LF
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
CAY16-4702F4LF
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 47000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
CAY16-122J4LF
CAY16-122J4LF by Bourns is a 1200 ohm resistor network with 4 functions. It has a power dissipation of 0.0625 W and can operate at temperatures ranging from -55 to 125 °C. This SMT package is commonly used in electronic circuits for its high resistance and compact size.
CAY16-240J4LF
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 24 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
CAY16-33R0F4LF
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 33 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
CAY16-473J4LF
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 47000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
CAY16-681J4
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 680 ohm; Rated Power Dissipation (P): .062 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved