Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns 6657S-1-103 is a 10k ohm linear potentiometer with 3 terminals. It has a rated power dissipation of 1.5W and operates b/w -40 to 125°C. Ideal for panel mount applications requiring precise resistance adjustments in electronic circuits.
Median Price
$43.830
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Farnell
1+ parts
$26.830
100+ parts
$17.350
1k+ parts
$16.950
10k+ parts
-
Mouser Electronics
$42.440
$32.110
$30.470
RS (Exports)
$43.290
$33.330
RS Americas
$33.750
Master Electronics
$43.990
$31.230
$29.880
Newark
$47.510
$33.580
$33.410
DigiKey
$48.040
$32.973
$30.572
Element14
$63.360
$51.530
Arrow
$30.800
$29.180
Verical
TME
$48.520
$42.180
Electro Sonic
$50.000
$31.860
$30.970
IBS Electronics
$61.696
$43.800
$41.907
Vyrian
VNN
Nova Conductors
Pegasus Components GmbH
Manoshevitz Elec. Sales
Continental Prestige Electronics
$37.760
$25.970
Allen Electronics Distributors
$52.710
$47.960
$45.310
Neutron USA
$94.990
Aranea Global
Suitable for use in a wide range of temperature environments.
Provides accurate and stable resistance values over time.
Offers a specific resistance value for precise electrical adjustment.
Can withstand higher temperatures without compromising performance.
Ensures minimal resistance change with temperature fluctuations.
Provides a margin of error in resistance value for flexibility in usage.
Can handle higher power levels without overheating.
Variable Resistors 6657S-1-103 attributes and parameters. Explore more Variable Resistors devices from Bourns
Orientation (Actuator):
Type (Actuator):
Construction:
Ganging Number:
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Diameter (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Shape:
Tolerance:
6657S-1-103 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
PCN Other - Multiple Changes 01/Dec/2012
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
2N2222A
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
Boca Semiconductor
LL4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Transistor & Electronic
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
1N4148
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
LM2675M-ADJ/NOPB
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
LM358AN
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
1N4148W-7-F
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT2222ALT1G
Onsemi
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
3306P-1-502
Bourns
Bourns 3306P-1-502 is a CERMET trimmer resistor with 5000 ohm resistance, 25% tolerance, and 215° rotation angle. It is used in PCB mount applications for voltage up to 100V, offering linear resistance law and operating temperature range of -25 to 100 °C.
5150500311
TE Connectivity
TE Connectivity's 5150500311 is a linear carbon film potentiometer with 100k ohm resistance, 3 terminals, and thumb wheel actuator. It has a tolerance of 20% and rated power dissipation of 0.2W. Ideal for applications requiring precise voltage control in through hole mounting setups.
249BBHS0XB25103KA
Vishay Intertechnology
Vishay Intertechnology's 249BBHS0XB25103KA is a CERMET POTENTIOMETER with 10000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. Ideal for PCB mount applications, it operates b/w -55 to 125 °C with a max voltage of 70.7 V and offers a rotation angle of 265°.
P16NM103KAB15
Vishay Intertechnology's P16NM103KAB15 is a 10000 ohm CERMET potentiometer with linear resistance law. Operating voltage of 100 V, rated power dissipation of 1 W, and temperature coefficient of 150 ppm/°C make it ideal for panel mount applications requiring precise resistance control.
252A103A60NB
Cts
The Cts 252A103A60NB is a linear potentiometer with 10000 ohm resistance, suitable for applications requiring precise voltage control. Featuring a vertical actuator and rectangular package, it has 6 wire terminals and operates b/w -10°C to 85°C. With a tolerance of 10%, this through-hole mount device has a rated power dissipation of 0.0125 W, making it ideal for joystick-type controls.
3214W-1-104E
Bourns 3214W-1-104E is a linear trimmer pot with 100k ohm resistance, suitable for applications requiring precise resistance adjustments. It features a CERMET technology, operates b/w -65 to 150 °C, and has a power dissipation of 0.25 W. Ideal for surface mount installations in electronic circuits.
PDB185-GTR31-504C2
Bourns PDB185-GTR31-504C2 is a 500000 ohm POTENTIOMETER with 20% tolerance, suitable for panel mount applications. Featuring a round shape and cylindrical package, it has a rated power dissipation of 0.05 W and operates b/w -10 to 70 °C. Ideal for precise resistance adjustments in electronic circuits.
3362P-1-101LF
Bourns 3362P-1-101LF is a linear trimmer resistor with 100 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It has a CERMET technology, operates b/w -55 to 125 °C, and features a screw actuator for adjusting resistance. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
533-11502
Vishay Intertechnology's 533-11502 is a 3-turn linear wire wound potentiometer with 5000 ohm resistance, suitable for panel mounting. Operating voltage of 70.7 V, rated power dissipation of 1 W, and temperature coefficient of 20 ppm/°C make it ideal for precise control applications in various electronic devices.
3223W-1-103E
Bourns 3223W-1-103E is a CERMET trimmer resistor with 11 turns, 10000 ohm resistance, and linear law. It operates b/w -65 to 150 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in electronic circuits requiring precise resistance adjustments.
2-1879319-3
POTENTIOMETER; Dimensions: 13.75mm x 11.7mm x 5.1mm; Orientation (Actuator): HORIZONTAL;
RS45111A900F
Alps Electric
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 70 Cel; Tolerance: 20 %; Terminal Shape: FLAT;
TSM4ZJ104KR10
Vishay Intertechnology's TSM4ZJ104KR10 is a CERMET variable resistor with 11 turns, linear resistance law, and 70-155°C operating temperature range. Ideal for surface mount applications in electronic circuits due to its compact SMT package style and high precision screw actuator design.
3852A-282-102AL
Bourns 3852A-282-102AL is a linear potentiometer with 1000 ohm resistance, 10% tolerance, and 2W power dissipation. It has a circular package, panel mount style, and operates b/w -1°C to 125°C. Ideal for applications requiring precise resistance adjustments in electronic circuits.
PE30L0FL472KAB
Vishay Intertechnology's PE30L0FL472KAB is a 4700 ohm linear potentiometer with 3 terminals. It has a rated power dissipation of 3W, operating voltage of 119.9V, and temperature coefficient of 150 ppm/°C. Ideal for panel mount applications requiring precise resistance adjustment in a compact circular package.
89PHR10KLFTB
Tt Electronics Plc
89PHR10KLFTB by Tt Electronics Plc is a CERMET TRIMMER resistor with 10000 ohm resistance, 10% tolerance, and 0.75 W power dissipation. It has a linear law of resistance and operates b/w -55 to 125 °C. Ideal for PCB mounting applications due to its compact size and through-hole mount compatibility.
Y0056500R000K0L
Vishay Precision Group
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 500 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
409HA104M
TE Connectivity's 409HA104M is a CERMET variable resistor with 100k ohm resistance, linear law, and 20% tolerance. It has a max operating temperature of 100°C and is used in PCB mount applications for voltage control with a rated power dissipation of 0.5W.
3296X-1-503LF
Bourns 3296X-1-503LF is a CERMET multi-turn trimmer resistor with 50000 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a tolerance of 10%. Ideal for applications requiring precise voltage adjustments in electronic circuits.
575SX1A48S103SS
Honeywell Sensing And Control
575SX1A48S103SS by Honeywell is a linear potentiometer with 10000 ohm resistance, 20% tolerance, and 0.5 W power dissipation. It has a horizontal actuator orientation and conductive plastic technology in a rectangular package. Ideal for panel mount applications with operating temperatures from -40 to 120 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
6657S-1-502
POTENTIOMETER; Mounting Type: PANEL MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): 1.5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
6657S-1-102
POTENTIOMETER; Mounting Type: PANEL MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): 1.5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
6657S-1-203
POTENTIOMETER; Resistance: 20000 ohm; Rated Power Dissipation (P): 1.5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %; Temperature Coef (ppm/Cel): 500;
6657S-1-202
POTENTIOMETER; Mounting Type: PANEL MOUNT; Resistance: 2000 ohm; Rated Power Dissipation (P): 1.5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved