Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ARRAY/NETWORK RESISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): 1.25 W; Maximum Operating Temperature: 125 Cel; Additional Features: TOLERANCE IS 1 OHM;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Connector Distribution Corp
1+ parts
100+ parts
1k+ parts
10k+ parts
Right Parts Inc.
Advanced Electronics
$0.030
$0.027
$0.025
Corohmni
$0.048
Perfect Parts
Resistor Networks & Arrays 4310R-101-100LF attributes and parameters. Explore more Resistor Networks & Arrays devices from Bourns
Additional Features:
Construction:
Element Power Dissipation:
First Element Resistance:
JESD-609 Code:
Length (Lead):
Spacing (Lead):
Mounting Type:
Network Type:
No. of Elements:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Resistor Type:
Size Code:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Temperature Coef Tracking:
Terminal Finish:
Terminal Shape:
Operating Voltage:
4310R-101-100LF Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.21.00.50
SB
8533.21.00.75
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
2N7002
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
Nexperia
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
Sensitron Semiconductor
Texas Instruments
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
Leshan Radio
LL4148
Continental Device India
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
Bharat Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
BAV99
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
BSS138
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
Semiconductor Technology
4606X-101-153LF
Bourns
Bourns 4606X-101-153LF resistor network features 5 elements with 15000 ohm resistance, 2% tolerance, and 0.75 W power dissipation. Ideal for applications requiring a temperature range of -55 to 125 °C, such as industrial control systems and automotive electronics. SIP package style with through-hole mounting method ensures reliable performance in various environments.
4609X-101-223LF
Bourns 4609X-101-223LF resistor network features 8 elements with 22000 ohm resistance, rated at 0.2 W power dissipation. Suitable for applications requiring a temperature range of -55 to 125 °C, with a tolerance of 2%. Ideal for through-hole mounting in various electronic circuits.
YC124-JR-0722RL
Yageo
YC124-JR-0722RL by Yageo is a 22 ohm resistor array with 4 functions, operating voltage of 25V, and rated power dissipation of 0.0625W. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard compliance and temperature coefficient of 200 ppm/°C.
4610X-AP1-203LF
The Bourns 4610X-AP1-203LF resistor network features 9 elements with 20000 ohm resistance each, rated at 0.2 W power dissipation. With a temperature coefficient of 50 ppm/°C, it is ideal for applications requiring precise tracking and a max operating temperature of 125 °C. The rectangular package with SIP style terminals makes it suitable for through-hole mounting in various electronic circuits.
4606X-102-105LF
Bourns 4606X-102-105LF resistor network features 3 functions, 1000000 ohm resistance, and 2.54 mm lead spacing. Ideal for applications requiring a 0.3 W power dissipation in isolated networks with a temperature range of -55 to 125 °C.
4610X-101-183LF
Bourns 4610X-101-183LF resistor network has 9 elements with 18000 ohm resistance each. It features a power dissipation of 0.2 W and operates at temperatures from -55 to 125 °C. Ideal for applications requiring precise resistance values in compact spaces.
EXB24V103JX
Panasonic
Panasonic's EXB24V103JX resistor network has 2 functions with 10000 ohm resistance. It operates at -55 to 125 °C and dissipates 0.063 W power. Ideal for AEC-Q200 compliant applications requiring a compact SMT package with isolated network type.
CN2B8TTE103J
Koa Speer Electronics
CN2B8TTE103J by Koa Speer Electronics is a resistor network with 8 functions, each with a resistance of 10000 ohm and a power dissipation of 0.125 W. It is designed for surface mount applications in electronic circuits, offering an operating voltage of 200 V and a temperature coefficient of 200 ppm/°C.
EXBN8VR000X
The Panasonic EXBN8VR000X is a resistor network with 4 functions, METAL GLAZE/THICK FILM technology, and 0 ohm resistance. It is used in applications requiring surface mounting type, with a package size of 2mm x 1mm x 0.45mm. Operating temperature range from -55°C to 125°C makes it suitable for various electronic devices.
4116R-1-331LF
Bourns 4116R-1-331LF resistor network features 330 ohm resistance, 2.54 mm lead spacing, and 0.25 W power dissipation. Ideal for applications requiring isolated network type with 16 terminals in a rectangular DIP package.
M8340110K1002GB
Tt Electronics Plc
M8340110K1002GB by Tt Electronics Plc is a bussed resistor network with 16 terminals, rated at 10000 ohm resistance and 2% tolerance. Constructed using tantalum nitride/nickel chrome technology, it operates b/w -65 to 125 °C and has a temperature coefficient of 100 ppm/°C. Ideal for military applications meeting MIL-PRF-83401 standard, this SMT package offers a compact design for surface mount installations.
4310R-101-182LF
Bourns 4310R-101-182LF is a resistor network with 9 elements, each having 1800 ohm resistance. It features a temperature coefficient of 100 ppm/°C and can operate b/w -55 to 125 °C. With a rated power dissipation of 1.25 W, it is ideal for through-hole mounting applications in various electronic circuits.
YC164-JR-0710KL
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .0625 W; Maximum Operating Temperature: 155 Cel; Tolerance: 5 %;
CAT16-101J4LF
CAT16-101J4LF by Bourns is a resistor network with 100 ohm resistance, 5% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in electronics requiring isolated networks with 4 functions and operating voltage up to 50 V.
GUS-SS8BLF-03-1871-D
GUS-SS8BLF-03-1871-D by Tt Electronics Plc is a miniature resistor network with 15 elements, each rated at 1870 ohm resistance. It features TANTALUM NITRIDE/NICKEL CHROME technology, 70 to 125 °C operating temperature range, and 0.05 W power dissipation. Ideal for applications requiring precise resistance values in compact SMT packages.
ACASA200222002P100
Vishay Intertechnology
Vishay Intertechnology's ACASA200222002P100 is a thin film chip resistor array with 20000 ohm resistance, 8 terminals, and 0.5% tolerance. It operates at temperatures from -55 to 125 °C and has a max voltage of 75 V. Ideal for SMT applications in professional series circuits requiring precise resistance values.
CRA06E08310K0JTA
Vishay Intertechnology's CRA06E08310K0JTA resistor network has 4 functions with a resistance of 10000 ohm and tolerance of 5%. Operating voltage is 50 V, with a power dissipation of 0.063 W. Ideal for surface mount applications in electronic circuits requiring precise resistance values.
CAT10-620J4LF
CAT10-620J4LF by Bourns is a resistor network with 4 functions, each having a resistance of 62 ohm. It operates b/w -55 to 125 °C and has a power dissipation of 0.0625 W. Ideal for applications requiring isolated networks in SMT packages with a tolerance of 5%.
4816P-2-472LF
Bourns 4816P-2-472LF is a resistor network with 15 elements, each having resistance of 4700 ohm and tolerance of 2%. It operates at temperatures ranging from -55 to 125 °C and has a power dissipation of up to 1.28 W. Ideal for applications requiring precise resistance values in compact SMT designs.
EXBN8V103JX
The Panasonic EXBN8V103JX is a resistor network with 4 functions, each with 10000 ohm resistance. It operates at temperatures from -55 to 125 °C and has a power dissipation of 0.031 W. Ideal for SMT applications requiring isolated networks in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved