Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ARRAY/NETWORK RESISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 330 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 2 %;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Resistor Networks & Arrays 4306R-104-331/391 attributes and parameters. Explore more Resistor Networks & Arrays devices from Bourns
Additional Features:
Construction:
Element Power Dissipation:
First Element Resistance:
JESD-609 Code:
Length (Lead):
Spacing (Lead):
Manufacturer Series:
Mounting Type:
Network Type:
No. of Elements:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Resistor Type:
Second or Last Element Resistance:
Series:
Size Code:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Temperature Coef Tracking:
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
4306R-104-331/391 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.21.00.50
SB
8533.21.00.75
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
1N4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Daco Semiconductor
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
M39029/58360
Souriau
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
FDV303N
Onsemi
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
2N7002
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
LL4148
Kec
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
4554
Jw Miller Magnetics
Other Semiconductors;
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803ADWRG4
Texas Instruments
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
4308R-101-103LF
Bourns
Bourns 4308R-101-103LF resistor network features 7 elements with 10000 ohm resistance, 2% tolerance, and 0.2 W power dissipation. Ideal for through-hole mounting applications in electronics requiring precise resistance values and high temperature stability up to 125°C.
744C083270JP
Cts
744C083270JP by Cts is a resistor network with 4 functions, isolated network type, and resistance of 27 ohm. It features a power dissipation of 0.125 W, operating voltage of 200 V, and surface mounting type. Ideal for applications requiring precise resistance values in compact electronic devices.
CAY10-103J4AS
The Bourns CAY10-103J4AS is a resistor network with 4 functions, each having a resistance of 10000 ohm. It has a power dissipation of 0.063 W and operates b/w -55 to 125 °C. Ideal for applications requiring isolated network resistors in compact SMT packages.
TC164-JR-07180RL
Yageo
Yageo's TC164-JR-07180RL is a 4-function resistor array with 180 ohm resistance, rated for temperatures from -55 to 155 °C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and 50V operating voltage.
GUS-SS4ALF-03-3570-BA
Tt Electronics Plc
GUS-SS4ALF-03-3570-BA by Tt Electronics Plc is a miniature resistor array with 357 ohm resistance, 0.1% tolerance, and 100V operating voltage. Ideal for SMT applications, it features TANTALUM NITRIDE/NICKEL CHROME technology and operates b/w -55 to 125 °C.
EXB18V223JX
The Panasonic EXB18V223JX is a resistor network with 4 functions, each with a resistance of 22000 ohm and a tolerance of 5%. It operates at temperatures ranging from -55 to 125 °C and has an operating voltage of 12.5 V. This SMT package is suitable for various applications requiring precise resistance values in compact electronic devices.
RM3216B-102/902-PBVW10
Susumu
The Susumu RM3216B-102/902-PBVW10 is a thin film resistor array with 2 functions, offering 1000 ohm and 9000 ohm resistances. With a tolerance of 0.1%, it operates b/w -55 to 155 °C, making it suitable for AEC-Q200 automotive applications. Its SMT package measures 3.2mm x 1.6mm x 0.45mm, ideal for surface mount installations.
LT5400BIMS8E-1#TRPBF
Analog Devices
ARRAY/NETWORK RESISTOR; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3; Terminal Finish: MATTE TIN; Minimum Operating Temperature: -40 Cel;
GUS-SS7BLF-02-1871-D
GUS-SS7BLF-02-1871-D by Tt Electronics Plc is a miniature resistor network with 13 elements, each rated at 1870 ohm resistance. It features TANTALUM NITRIDE/NICKEL CHROME technology and has a power dissipation of 0.05 W. Ideal for applications requiring precise resistance values in compact electronic devices.
MAX5491WA30000+T
Maxim Integrated
ARRAY/NETWORK RESISTOR; Network Type: DIVIDER; Terminal Finish: MATTE TIN;
MPMT2002DT1
Vishay Intertechnology
Vishay Intertechnology's MPMT2002DT1 is a thin film resistor network with 2 elements, each at 10000 ohm resistance. It has a power dissipation of 0.1 W and operates b/w -55 to 150 °C. Ideal for voltage division applications due to its divider network type and 100 V operating voltage capacity in SOT-23 package style.
YC164-FR-0733RL
YC164-FR-0733RL by Yageo is a 33 ohm resistor network with 4 functions, METAL GLAZE/THICK FILM tech, and 1% tolerance. Ideal for AEC-Q200 applications, it operates b/w -55 to 155 °C with a rated power of 0.0625 W in SMT packages.
Y4485V0002QT9R
Vishay Foil Resistors
ARRAY/NETWORK RESISTOR; Resistance: 5000 ohm; Rated Power Dissipation (P): .05 W; Maximum Operating Temperature: 125 Cel; Tolerance: .02 %; Network Type: Divider;
Y1747V0019QT9W
Vishay Intertechnology's Y1747V0019QT9W is a DIP resistor array with 5000 ohm resistance, 0.02% tolerance, and 0.2 ppm/°C temperature coefficient. Ideal for applications requiring precise resistance values in a compact package, such as precision instrumentation and industrial equipment.
CRA04P08310R0JTD
Vishay Intertechnology's CRA04P08310R0JTD resistor network has 4 functions with 10 ohm resistance, rated for 70°C to 155°C. Utilized in surface mount technology applications due to its isolated network type and 0.063 W power dissipation capability.
EXB18V102JX
Panasonic's EXB18V102JX is a resistor network with 4 functions, 1000 ohm resistance, and 5% tolerance. It operates at temperatures from -55 to 125 °C and has a power dissipation of 0.1 W. Ideal for surface mount applications in electronic circuits requiring precise resistance values.
GS4ALF023570BAT
GS4ALF023570BAT by Tt Electronics Plc is a 0.1W resistor array with 357 ohm resistance, 5 ppm/°C temperature coef tracking, and 0.1% tolerance. Ideal for surface mount applications in isolated networks, it operates b/w -55 to 125 °C with a max voltage of 100V.
YC124-FR-07100RL
YC124-FR-07100RL by Yageo is a resistor network with 4 functions, 100 ohm resistance, and 1% tolerance. It operates b/w -55 to 155 °C and has a rated power dissipation of 0.0625 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
Y5076V0029AA0L
Vishay Intertechnology's Y5076V0029AA0L resistor network features 2000 ohm resistance, 2.54 mm lead spacing, and -55 to 125 °C operating temperature range. Ideal for PCB mounting in applications requiring precise voltage division with a tolerance of 0.05%.
LT5400AIMS8E-2#PBF
Linear Technology
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Maximum Operating Temperature: 85 Cel; Tolerance: 7.5 %; Width (Package): 3 mm;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved