Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
POTENTIOMETER; Resistance: 1000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %; Diameter (Package): 19.05 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Variable Resistors 3856H282102A attributes and parameters. Explore more Variable Resistors devices from Bourns
Construction:
Maximum Operating Temperature:
Minimum Operating Temperature:
Diameter (Package):
Length (Package):
Package Style (Meter):
Rated Power Dissipation (P):
Resistance:
Resistor Type:
Angle Of Rotation:
Series:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Tolerance:
3856H282102A Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
1N4148
Crimson Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
Motorola
2N2222A
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
MBR0520LT1G
Onsemi
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
Eic Semiconductor
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
SMBJ18CA
Bytesonic Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Itt Semiconductor
PTC10LV10203A2020
Piher Sensors And Controls Sa
PTC10LV10203A2020 by Piher Sensors And Controls Sa is a CERMET variable resistor with 20000 ohm resistance, linear law, and 20% tolerance. It has a rated power dissipation of 0.33 W and operates b/w -40 to 90 °C. Ideal for through hole mounting applications in electronic circuits.
3362H-1-102LF
Bourns
Bourns 3362H-1-102LF is a CERMET trimmer resistor with 1000 ohm resistance, linear law, and 10% tolerance. It operates b/w -55 to 125 °C and has a power dissipation of 0.5 W. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact rectangular package.
27ESB103MMF50N
TE Connectivity's 27ESB103MMF50N is a 10000 ohm logarithmic potentiometer with a 20% tolerance and 0.4 W power dissipation. Its carbon film technology, circular package shape, and horizontal actuator orientation make it ideal for precise resistance adjustments in electronic circuits.
3296X-1-503LF
Bourns 3296X-1-503LF is a CERMET multi-turn trimmer resistor with 50000 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a tolerance of 10%. Ideal for applications requiring precise voltage adjustments in electronic circuits.
RK27112A00CC
Alps Electric
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .05 W; Maximum Operating Temperature: 70 Cel; Tolerance: 20 %;
3362M-1-103LF
Bourns 3362M-1-103LF is a linear trimmer resistor with 10000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It is used in PCB mount applications for temperature-sensitive circuits due to its 70°C to 125°C operating range and low temperature coefficient of 100 ppm/°C.
T7YB103MT20
Vishay Intertechnology
Vishay Intertechnology's T7YB103MT20 is a CERMET variable resistor with 10000 ohm resistance, 20% tolerance, and 0.5 W power dissipation. Ideal for PCB mounting applications, it operates b/w -55 to 125 °C with a linear law of resistance. The screw-type actuator allows for precise adjustments in various electronic circuits.
RJS50RE
Ohmite Manufacturing
The Ohmite Manufacturing RJS50RE is a 50 ohm wire wound potentiometer with linear resistance law. It features a 10% tolerance, 50 W power dissipation, and 300° angle of rotation. Ideal for panel mount applications requiring precise resistance adjustment in a circular package.
1879318-6
POTENTIOMETER; Orientation (Actuator): HORIZONTAL; Dimensions: 17.3mm x 16mm x 7.5mm;
3386P-1-103TLF
Bourns 3386P-1-103TLF is a CERMET trimmer resistor with 10000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. Ideal for PCB mounting applications, it features a linear law of resistance and operates b/w -55 to 125 °C temperatures.
3296W-1-103LF
Bourns 3296W-1-103LF is a CERMET multi-turn trimmer resistor with 10000 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C with a tolerance of 10%. Ideal for applications requiring precise voltage adjustments in electronic circuits.
6639S-1103
Bourns 6639S-1103 is a 10000 ohm linear potentiometer with 15% tolerance, suitable for panel mount applications. Featuring conductive plastic technology, it has a rated power dissipation of 1W and operates b/w -40°C to 125°C. Ideal for precise control in various electronic devices.
67WR1KLF
67WR1KLF by Tt Electronics Plc is a CERMET variable resistor with 20 turns and linear resistance law. It has a rated power dissipation of 0.5W, operating voltage of 200V, and temperature coefficient of 100 ppm/°C. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact rectangular package.
PVZ3A104C01R00
Murata Manufacturing
Murata Manufacturing's PVZ3A104C01R00 is a 100k ohm linear trimmer resistor with 30% tolerance. It operates at -25 to 85°C, has a power dissipation of 0.1W, and can handle up to 50V. Ideal for applications requiring precise resistance adjustments in compact SMT designs.
72PR5KLFTB
72PR5KLFTB by Tt Electronics Plc is a TRIMMER resistor with CERMET technology. It has a linear Law Of Resistance and operates b/w -55 to 125 °C. With a rated power dissipation of 0.5 W, it is ideal for PCB Mount applications requiring precise resistance adjustments up to 200 V.
PE30L0FR103KAB
Vishay Intertechnology's PE30L0FR103KAB is a 3W linear potentiometer with 10% tolerance and 270° rotation angle. Operating voltage of 173V, temperature coefficient of 150 ppm/°C, and rated temperature range from -55°C to 125°C make it ideal for chassis mount applications in various electronic devices.
P16NP222KAB15
Vishay Sfernice
POTENTIOMETER; Mounting Type: PANEL MOUNT; Resistance: 2200 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 85 Cel; Tolerance: 10 %;
P270-DS22R5K
P270-DS22R5K by Tt Electronics Plc is a 5000 ohm linear potentiometer with 3 terminals. It has a rated power dissipation of 2W and operates b/w -55 to 120 °C. Ideal for panel mount applications requiring precise resistance adjustments in electronic circuits.
3299Y-1-203
Bourns 3299Y-1-203 is a CERMET trimmer pot with 20000 ohm resistance, 25 turns, and linear resistance law. It is used in PCB mount applications for adjusting voltage with a max operating temperature of 125 °C.
RK09L12B0A31
POTENTIOMETER; Resistance: 50000 ohm; Maximum Operating Temperature: 70 Cel; Tolerance: 20 %; Packing Method: Tray; Angle Of Rotation: 300 deg;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved