Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
POTENTIOMETER; Mounting Type: CHASSIS MOUNT; Resistance: 50000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 125 Cel; Tolerance: 3 %;
Median Price
-
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
< 1k
Connector Distribution Corp
1+ parts
100+ parts
1k+ parts
10k+ parts
Right Parts Inc.
Lakeland Logistics Inc
Bristol Electronics
Mentor Electronics Marketing, LLC
Electronic Expediters
R&J Components
Mil-Aero Solutions, Inc.
Manoshevitz Elec. Sales
RTC Component Inc.
Perfect Parts
Variable Resistors 3500S-2-503 attributes and parameters. Explore more Variable Resistors devices from Bourns
Construction:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Diameter (Package):
Length (Package):
Package Style (Meter):
Rated Power Dissipation (P):
Resistance:
Resistor Type:
Angle Of Rotation:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Shape:
Tolerance:
3500S-2-503 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.31.00.00
SB
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
2N2222A
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
DS18B20+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
LL4148
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Weitron Technology
1N4148WS
Synsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Hy Electronic
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BSS138
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
Swampscott Electronics
LM358ADR
Texas Instruments
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
1N4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
LM555CN
Rochester Electronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
MMBT2907ALT1G
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
3296X-1-103LF
Bourns
Bourns 3296X-1-103LF is a CERMET trimmer resistor with 10000 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a tolerance of 10%. Ideal for applications requiring precise voltage adjustments in circuits with up to 300 V operating voltage.
3386W-1-104LF
Bourns 3386W-1-104LF is a CERMET trimmer resistor with 100k ohm resistance, 10% tolerance, and 0.5 W power dissipation. It has a linear law of resistance and operates b/w -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments.
SM-42TW104
Nidec Copal Electronics
The Nidec Copal Electronics SM-42TW104 is a 100000 ohm linear trimmer resistor with 11 turns and CERMET technology. It has a temperature coefficient of 100 ppm/°C and operates b/w -65 to 150 °C, making it ideal for precise voltage adjustments in electronic circuits. This surface mount device with J BEND terminals is commonly used in applications requiring accurate resistance control at temperatures up to 85 °C.
TC73W-1-104E
Bourns TC73W-1-104E is a 100k ohm linear trimmer resistor with 20 turns, rated for temperatures b/w -25 to 85°C. Ideal for applications requiring precise resistance adjustments in compact SMT designs.
3299X-1-104LF
The Bourns 3299X-1-104LF is a CERMET variable resistor with a resistance of 100k ohm, 25 turns, and a linear law of resistance. It is commonly used in PCB mount applications for adjusting voltage or current levels.
67PR100KLF
Tt Electronics Plc
67PR100KLF by Tt Electronics Plc is a CERMET variable resistor with 20 turns, linear resistance law, and 85-125 °C operating temperature range. Ideal for PCB mounting applications due to its rectangular package shape and wire terminal finish.
RK09K113004U
Alps Electric
POTENTIOMETER; Resistance: 10000 ohm; Maximum Operating Temperature: 70 Cel; Tolerance: 20 %; Orientation (Actuator): VERTICAL; Width (Package): 9.8 mm;
3006P-7-203LF
The Bourns 3006P-7-203LF is a linear trimmer pot with 20000 ohm resistance, rated for 0.75W power dissipation. It has a max operating temperature of 125°C and can handle up to 400V. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
Y405310K0000J0L
Vishay Precision Group
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 5 %;
3314G-1-103E
Bourns 3314G-1-103E is a linear trimmer resistor with 10000 ohm resistance, 20% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and 300 V operating voltage capability.
D50K5K0E
Ohmite Manufacturing
The Ohmite Manufacturing D50K5K0E is a 5000 ohm wire wound potentiometer with linear resistance law. It has a rated power dissipation of 50W, operating voltage of 1625V, and temperature coefficient of 260 ppm/°C. Ideal for chassis mount applications requiring precise resistance adjustments in high-temperature environments up to 350 °C.
PTV09A-4020F-A203
Bourns PTV09A-4020F-A203 is a 20000 ohm potentiometer with 3 terminals, CARBON technology, and AUDIO law of resistance. Ideal for PCB mounting applications, it has a max operating temperature of 50°C and shaft actuator type. With a package length of 10mm and width of 6.8mm, it offers a rated power dissipation of 0.05W.
3299W-1-503LF
Bourns 3299W-1-503LF is a CERMET trimmer pot with 50000 ohm resistance, 25 turns, and linear resistance law. Ideal for PCB mounting applications, it operates b/w -55 to 125 °C with a tolerance of 10%.
RK09L12B0A1V
Alps Alpine
Alps Alpine RK09L12B0A1V is a logarithmic potentiometer with 10000 ohm resistance, 20% tolerance, and 10 V operating voltage. It is used in PCB mount applications for audio equipment due to its shaft actuator type and 300° rotation angle.
TC42X-2-102E
The Bourns TC42X-2-102E is a linear cermet variable resistor with 1 turn and a resistance of 1000 ohm. It has a temperature coefficient of 250 ppm/°C and can operate at temperatures ranging from -40 to 100 °C. This surface mount trimmer is commonly used in electronic circuits for voltage control and adjustment.
67WR200KLF
67WR200KLF by Tt Electronics Plc is a CERMET variable resistor with 20 turns, linear resistance law, and 85°C rated temperature. It is used in applications requiring precise resistance adjustments such as PCB mounting for through-hole assembly. With a max operating temperature of 125°C and an operating voltage of 200V, it offers reliable performance in various electronic circuits.
64WR5KLF
64WR5KLF by Tt Electronics Plc is a CERMET variable resistor with 5000 ohm resistance, rated for 85-150 °C. It features a linear law of resistance, 12 turns, and operates at an angle of rotation up to 4320°. Ideal for PCB mounting applications requiring precise voltage adjustments in electronic circuits.
3296Y-1-201LF
Bourns 3296Y-1-201LF is a 200 ohm, 25-turn linear trimmer resistor with CERMET technology. Operating voltage of 300V, rated power dissipation of 0.5W, and temperature coefficient of 100 ppm/°C make it ideal for precision applications in electronics. With through-hole mounting and vertical actuator orientation, it ensures reliable performance in various circuits.
ST-4ETD103
Vishay Intertechnology's ST-4ETD103 is a CERMET variable resistor with 10000 ohm resistance, 20% tolerance, and 0.25 W power dissipation. It is used in applications requiring precise voltage adjustments due to its linear resistance law and screw actuator type for a 3600° rotation angle. Ideal for surface mount installations with operating temperatures ranging from -55 °C to 125 °C.
P10XXAI101KB30
Vishay Intertechnology's P10XXAI101KB30 is a CERMET POTENTIOMETER with 10% Tolerance, 250° Angle Of Rotation, and 0.5 W Rated Power Dissipation. Ideal for PCB Mount applications in electronics requiring precise resistance adjustments within -55 to 125 °C temperature range.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved