Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns 3500S-2-103L is a 10-turn linear wire wound potentiometer with 10000 ohm resistance, suitable for panel mount applications. With a rated power dissipation of 2W and operating temperature range from 1 to 125°C, it offers precise control in various electronic devices. Its gold over nickel terminal finish ensures reliable performance in demanding environments.
Median Price
$74.615
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Farnell
1+ parts
$68.970
100+ parts
$58.740
1k+ parts
-
10k+ parts
RS Americas
$70.630
$54.380
Master Electronics
$70.660
$55.370
$54.670
Mouser Electronics
$78.570
$61.670
TTI
$79.000
$60.270
$58.490
Newark
$80.360
$67.240
Verical
$83.129
$66.129
Element14
$115.830
$98.680
Arrow
$59.870
$59.250
RS (Exports)
$53.294
TME
$65.700
$56.820
Electro Sonic
$71.310
$52.440
$52.170
IBS Electronics
$102.228
$77.656
$76.675
Vyrian
Nova Conductors
VNN
Continental Prestige Electronics
$64.240
$42.570
Neutron USA
$154.800
Argo Parts USA
Aranea Global
Perfect Parts
Having 10 turns allows for more precise adjustment and finer control of resistance, making this product suitable for applications requiring high precision.
With a rated temperature of 70 °C, this product can operate efficiently in normal temperature conditions, ensuring reliable performance.
Wire wound technology offers high stability and accuracy in resistance values, making this product ideal for applications where precision is crucial.
The 10000 ohm resistance value provides a wide range of adjustable resistance, making this product versatile for various electrical circuits.
With a tolerance of 3%, this product offers consistent and predictable resistance values, ensuring reliable performance in different operating conditions.
The 2W rated power dissipation allows this product to handle higher power loads without overheating, making it suitable for applications requiring high power handling capacity.
Variable Resistors 3500S-2-103L attributes and parameters. Explore more Variable Resistors devices from Bourns
Orientation (Actuator):
Type (Actuator):
Additional Features:
Construction:
Ganging Number:
JESD-609 Code:
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Diameter (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
3500S-2-103L Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.31.00.00
SB
PCN Design/Specification - Mult Devs Marking 19/Dec/2023 Multiple Models Varnish Process 18/Jan/2012
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
BAV99
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
2N2222A
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
FDC5614P
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
1N4148
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
Kec
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS-7-F
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Sprague
NE555D
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
LL4148
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
3386W-1-104LF
Bourns
Bourns 3386W-1-104LF is a CERMET trimmer resistor with 100k ohm resistance, 10% tolerance, and 0.5 W power dissipation. It has a linear law of resistance and operates b/w -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments.
3296Z-1-502LF
Bourns 3296Z-1-502LF is a CERMET trimmer resistor with 5000 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a tolerance of 10%. Ideal for applications requiring precise voltage adjustments in electronic circuits.
3224J-1-100E
Bourns 3224J-1-100E is a linear trimmer pot with 12 turns, 10 ohm resistance, and 10% tolerance. It operates b/w -65 to 150 °C and has a power dissipation of 0.25 W. Ideal for precise resistance adjustments in electronic circuits requiring compact SMT components.
RV4NAYSD252A
Nte Electronics
POTENTIOMETER; Mounting Type: CHASSIS MOUNT; Resistance: 2500 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 120 Cel; Tolerance: 10 %;
RUS1K0E
Ohmite Manufacturing
The Ohmite Manufacturing RUS1K0E is a 1000 ohm POTENTIOMETER with LINEAR resistance law, WIRE WOUND technology, and 10% tolerance. It features a 1000W power dissipation rating, HORIZONTAL orientation, and SHAFT actuator type. Ideal for PANEL MOUNT applications requiring precise resistance adjustment in a CIRCULAR PACKAGE.
3296Y-1-102LF
Bourns 3296Y-1-102LF is a 1000 ohm linear trimmer resistor with 25 turns, CERMET technology, and 10% tolerance. Ideal for applications requiring precise resistance adjustments in circuits with operating voltage up to 300V. Features multi-turn construction, through-hole mounting, and temperature coefficient of 100 ppm/°C.
91A1A-B28-A13L
The Bourns 91A1A-B28-A13L is a CERMET POTENTIOMETER with 5000 ohm resistance, 10% tolerance, and 2W power dissipation. It has a linear law of resistance and operates b/w -40°C to 125°C. Ideal for panel mount applications requiring precise voltage or current control.
TC33X-2-102E
Bourns TC33X-2-102E is a linear trimmer resistor with 1000 ohm resistance, 25% tolerance, and 0.15 W power dissipation. It operates b/w -40 to 100 °C and has a temperature coefficient of 250 ppm/°C. Ideal for applications requiring precise resistance adjustments in compact SMT designs.
25SR20KLF
Tt Electronics Plc
25SR20KLF by Tt Electronics Plc is a CERMET variable resistor with a resistance of 20000 ohm, rated for temperatures b/w -55 to 125 °C. It features a linear law of resistance and is ideal for PCB mounting applications requiring precise voltage adjustments up to 300 V.
3314G-1-102E
The Bourns 3314G-1-102E is a CERMET variable resistor with 1000 ohm resistance, linear law, and 20% tolerance. It operates b/w -55 to 125 °C and has a power dissipation of 0.25 W. Ideal for applications requiring precise voltage control in automotive electronics due to AEC-Q200 standard compliance.
PVG3A103C01R00
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
3540S-1-501L
Bourns 3540S-1-501L is a 500 ohm, 2W wire wound potentiometer with linear resistance law. Featuring 10 turns and a shaft actuator, it has a temperature coefficient of 50 ppm/°C. Ideal for panel mount applications in circuits requiring precise resistance adjustments.
RK27112A0A16
Alps Alpine
Alps Alpine RK27112A0A16 is a linear potentiometer with 100k ohm resistance, 20% tolerance, and 300° rotation angle. It is used in PCB mount applications for adjusting settings with its shaft actuator and through-hole mounting capability. With a compact rectangular package of 27x25.3x24.5 mm, it offers precise control in various electronic devices.
159-11102
Vishay Intertechnology
Vishay Intertechnology's 159-11102 is a CERMET POTENTIOMETER with 1000 ohm resistance, 20% tolerance, and 3.5 W power dissipation. It has a cylindrical package, panel mount style, and operates b/w -55 to 150 °C. Ideal for applications requiring precise resistance adjustment in compact spaces.
T93YA502KT20
Vishay Intertechnology's T93YA502KT20 is a linear trimmer resistor with a resistance of 5000 ohm and a tolerance of 10%. It is commonly used in PCB mount applications where precise resistance adjustment is required.
3549S-1AA-502A
Bourns 3549S-1AA-502A is a 5000 ohm potentiometer with linear resistance law, 10 turns, and 3% tolerance. It has a rated power dissipation of 2W and operates b/w -40 to 125 °C. Ideal for panel mount applications requiring precise resistance adjustments in a compact circular package.
P16NP104KAB15
P16NP104KAB15 by Vishay Intertechnology is a 1-turn linear potentiometer with a resistance of 100k ohm. It has a circular package shape and is suitable for panel mount applications.
TS53YL103MR10
Vishay Intertechnology's TS53YL103MR10 is a CERMET variable resistor with 10000 ohm resistance, 20% tolerance, and 0.25 W power dissipation. It is used in applications requiring precise voltage adjustments due to its linear law of resistance and screw actuator type for easy adjustment. Suitable for surface mounting with a temperature coefficient of 100 ppm/°C.
53C21MEG
Honeywell Sensing And Control
53C21MEG by Honeywell is a linear potentiometer with resistance of 1M ohm, 3 terminals, and shaft actuator. It operates b/w -55 to 120 °C and has a power dissipation of 2W. Ideal for panel mounting applications requiring precise variable resistance control.
P161G200QSC30B202
P161G200QSC30B202 by Tt Electronics Plc is a linear conductive plastic potentiometer with 2000 ohm resistance and 20% tolerance. It has 12 terminals, operates b/w -10 to 70 °C, and offers a rated power dissipation of 0.2 W. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3500S-2-102L
POTENTIOMETER; Mounting Type: CHASSIS MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 125 Cel; Tolerance: 3 %;
3500S-2-202L
Bourns 3500S-2-202L is a 10-turn, 2000 ohm linear wire wound potentiometer with 3% tolerance. It has a rated power dissipation of 2W and operates b/w -1°C to +125°C. Ideal for precise resistance adjustments in applications requiring panel or chassis mounting.
3500S-2-204L
POTENTIOMETER; Resistance: 200000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 125 Cel; Tolerance: 3 %; JESD-609 Code: e4;
3500S-2-501L
Bourns 3500S-2-501L is a 500 ohm wire wound potentiometer with 3% tolerance and 2W power dissipation. Bushing mount design, panel mount package style, and 3600° rotation angle make it ideal for precise resistance adjustments in various electronic applications. Operating temperature range from 1 to 125 °C ensures reliable performance in diverse environments.
3500S-1-502L
POTENTIOMETER; Mounting Type: CHASSIS MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 125 Cel; Tolerance: 3 %;
3500S-2-502L
Bourns 3500S-2-502L is a 5000 ohm potentiometer with linear resistance law, 3% tolerance, and 10 turns. It has a rated power dissipation of 2W and operates b/w -1°C to +125°C. Ideal for chassis mount applications requiring precise resistance adjustments in electronic circuits.
3500S-1-203L
POTENTIOMETER; Resistance: 20000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 125 Cel; Tolerance: 3 %; Temperature Coef (ppm/Cel): 50;
3500S-2-202
POTENTIOMETER; Mounting Type: CHASSIS MOUNT; Resistance: 2000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 125 Cel; Tolerance: 3 %;
3500S-1-102
3500S-1-502
3500S-1-103L
POTENTIOMETER; Mounting Type: CHASSIS MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 125 Cel; Tolerance: 3 %;
3500S-1-103
3500S-2-102
3500S-2-103
3500S-2-502
3500S-1-102L
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved