Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1000000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
Median Price
$0.834
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
< 1k
Avnet
1+ parts
100+ parts
-
1k+ parts
10k+ parts
R&J Components
Bristol Electronics
Atlantic Semiconductor
QUARKTWIN TECHNOLOGY LTD
Variable Resistors 3362H-1-105 attributes and parameters. Explore more Variable Resistors devices from Bourns
Orientation (Actuator):
Type (Actuator):
Construction:
Ganging Number:
JESD-609 Code:
Diameter (Lead):
Length (Lead):
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
3362H-1-105 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM358DT
STMicroelectronics
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
1N4148
Taitron Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
Bkc Semiconductors
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
1N4148WS
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
B340A-13-F
B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.
Comchip Technology
3296W-1-202
Bourns
Bourns 3296W-1-202 is a CERMET multi-turn trimmer resistor with 2000 ohm resistance, 25 turns, and linear resistance law. It has a max operating temperature of 125 °C and is suitable for applications requiring precise voltage adjustments in electronic circuits.
3683S-1-104L
Bourns 3683S-1-104L is a linear potentiometer with 100k ohm resistance, 3% tolerance, and 2W power dissipation. Ideal for panel mount applications in temperature-sensitive environments due to its -25 to 85 °C operating range and low temp coef of 100 ppm/°C.
PV36W503C01B00
Murata Manufacturing
Murata Manufacturing's PV36W503C01B00 is a 50000 ohm TRIMMER resistor with 25 turns and linear resistance law. It has a max operating temperature of 125 °C and operates at 300 V, suitable for PCB mounting applications. The resistor features CERMET technology, vertical actuator orientation, and screw-type actuator design.
3299Y-1-202
The Bourns 3299Y-1-202 is a variable resistor with a resistance of 2000 ohm and a tolerance of 10%. It is commonly used in PCB mount applications and has a max operating temperature of 125 °C.
3296W-1-504LF
Bourns 3296W-1-504LF is a CERMET variable resistor with 25 turns, 500000 ohm resistance, and linear law. Ideal for applications requiring precise resistance adjustments in circuits with operating voltage up to 300 V. Features multi-turn construction, through-hole mounting, and a rated power dissipation of 0.5 W.
3005P-1-502
The Bourns 3005P-1-502 is a linear wire wound variable resistor with 20 turns and a resistance of 5000 ohm. It has a rated power dissipation of 1W and can operate in temperatures ranging from -65 to 125 °C. This trimmer resistor is commonly used in PCB mount applications requiring precise resistance adjustments.
3386U-1-104RLF
Bourns 3386U-1-104RLF is a CERMET trimmer resistor with 100k ohm resistance, linear law, and 10% tolerance. Ideal for PCB mounting applications, it has a max operating temperature of 125°C and an actuator type of screw. The resistor's compact design features a through-hole mount with three terminals in a rectangular package style.
RV4NAYSD102A
Honeywell Sensing And Control
RV4NAYSD102A by Honeywell is a 1000 ohm linear potentiometer with 3 lug terminals. It has a rated power dissipation of 2W and operates b/w -55°C to 120°C. Ideal for panel mounting applications, it features a conductive plastic technology in a circular package with a shaft actuator.
3312J-1-103E
Bourns 3312J-1-103E is a linear trimmer resistor with 10000 ohm resistance, 20% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronic circuits requiring precise resistance adjustments within -55 to 125 °C temperature range.
3006P-7-202LF
Bourns 3006P-7-202LF is a linear trimmer pot with 2000 ohm resistance, 15 turns, and 10% tolerance. It operates b/w -55 to 125 °C and can handle up to 400V. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact package.
72PR100KLF
Tt Electronics Plc
72PR100KLF by Tt Electronics Plc is a CERMET trimmer pot with 100000 ohm resistance, suitable for PCB mount applications. It features a linear law of resistance, 3 terminals, and operates b/w -55 to 125 °C. With a rated power dissipation of 0.5 W and operating voltage of 200 V, it offers precise adjustment in various electronic circuits.
TW1500KA
TE Connectivity
TE Connectivity's TW1500KA is a 50 ohm POTENTIOMETER with WIRE WOUND tech. It has a 1W power dissipation, 10% tolerance, and operates at -55 to 125 °C. Ideal for panel mount applications due to its cylindrical shape and HORIZONTAL orientation.
3382G-1-104G
POTENTIOMETER;
P0915N-FC15AR50K
Tt Electronics Plc P0915N-FC15AR50K is a 50000 ohm potentiometer with conductive plastic technology. It has a rectangular package, 3 terminals, and operates b/w -10 to 70 °C. Ideal for audio applications, this PCB mount resistor features a shaft actuator and 20% tolerance for precise control in panel mounting setups.
PDB183-GTR22-504A2
Bourns PDB183-GTR22-504A2 is a 500k ohm potentiometer with 20% tolerance, suitable for audio applications. It has a rated power dissipation of 0.1W and operates at temperatures from -10 to 50°C. The cylindrical package with vertical orientation and lug terminals make it ideal for panel mount in chassis setups.
3296Y-1-203LF
Bourns 3296Y-1-203LF is a 20000 ohm, 25-turn linear cermet trimmer resistor with 10% tolerance. Operating voltage of 300V and rated power dissipation of 0.5W make it suitable for precise circuit adjustments in various electronic applications. With a temperature coefficient of 100 ppm/°C, it can operate b/w -55 to 125 °C effectively.
3549S-1AA-201A
Bourns 3549S-1AA-201A is a 200 ohm, 10-turn linear wirewound potentiometer with 3% tolerance. It has a rated power dissipation of 2W and operates b/w -40°C to 125°C. Ideal for panel mount applications requiring precise resistance adjustments in a compact circular package.
M43P501KB40
Vishay Intertechnology
Vishay Intertechnology's M43P501KB40 is a 500 ohm linear trimmer resistor with 15 turns and 10% tolerance. Operating voltage of 19.4 V, rated power dissipation of 0.75 W, and temperature coefficient of 100 ppm/°C make it ideal for PCB mount applications requiring precise resistance adjustments in a wide temperature range from -55 to 125 °C.
3314G-1-104E
Bourns 3314G-1-104E is a CERMET variable resistor with 100k ohm resistance, linear law, and 20% tolerance. It operates b/w -55°C to 125°C, has a power dissipation of 0.25W, and can handle up to 300V. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and compact rectangular package design.
3856H282103A
Bourns 3856H282103A is a CERMET POTENTIOMETER with 10000 ohm resistance, 10% tolerance, and 2 W power dissipation. Ideal for chassis mount applications, it offers a wide temperature range from -65 to 125 °C and a rotation angle of 250°.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved