Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns 3362F-1-103LF is a linear cermet trimmer resistor with 10000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It is used in PCB mount applications for temperature-sensitive circuits requiring precise resistance adjustments. With a wide operating temperature range of -55 to 125 °C, it offers reliable performance in various environments.
Median Price
$2.460
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Farnell
1+ parts
$1.820
100+ parts
$1.280
1k+ parts
$1.140
10k+ parts
-
Newark
$1.770
$1.490
$1.420
Mouser Electronics
$2.490
$1.460
$1.210
DigiKey
$2.740
$1.898
$1.572
$1.377
Element14
$3.190
$2.350
$2.190
Verical
$3.575
$1.651
$1.586
Chip1Stop
$1.847
Arrow
$1.216
$1.058
$0.977
TTI
$1.330
$1.270
VNN
Electro Sonic
$2.830
$1.310
$1.170
ComSIT Distribution GmbH
ComSIT USA
Nova Conductors
Continental Prestige Electronics
$2.110
$1.550
QUARKTWIN TECHNOLOGY LTD
Netroflash
The small diameter of the lead allows for easy soldering and connection in tight spaces, making installation convenient.
With a rated temperature of 70°C, this variable resistor is suitable for a wide range of operating temperatures, providing stability and reliability.
Vertical orientation of the actuator allows for easy adjustment and control, making it user-friendly in various applications.
Utilizing Cermet technology ensures high precision and excellent stability in resistance values, enhancing the overall performance of the variable resistor.
The linear law of resistance ensures a consistent and predictable change in resistance with respect to the actuator position, providing accuracy in controlling the circuit.
With a resistance value of 10000 ohms, this variable resistor is suitable for a variety of circuit applications requiring precise resistance adjustment.
Having three terminals allows for versatile connectivity options and circuit configurations, increasing flexibility in usage.
The PCB mount package style enables easy and secure mounting on a printed circuit board, ensuring a stable and reliable connection.
The wire terminal shape provides a secure connection and ease of soldering, making installation hassle-free.
With a maximum operating temperature of 125°C, this variable resistor can withstand high temperatures, suitable for demanding environments.
A low temperature coefficient of 100 ppm/°C ensures minimal resistance drift over a wide temperature range, maintaining accuracy in signal processing.
The matte tin finish on the terminals provides corrosion resistance and reliable conductivity, ensuring long-term performance and durability.
The appropriate length of the lead allows for secure connection and flexibility in installation, accommodating different mounting configurations.
The compact height of the package saves space and allows for easy integration in compact electronic devices.
Being a trimmer resistor type, it offers precise resistance adjustment for fine-tuning circuits, making it ideal for precision applications.
The screw-type actuator allows for simple and accurate adjustment of resistance values, providing ease of use and control.
With a tolerance of 10%, this variable resistor offers consistent and reliable performance within specified resistance limits, ensuring accurate circuit operation.
The length of the package provides ample space for components and leads, facilitating easy installation and connection in electronic circuits.
The through-hole mounting type offers secure and stable installation on a circuit board, providing durability and reliable electrical connections.
With a rated power dissipation of 0.5 W, this variable resistor can handle moderate power levels, making it suitable for various applications.
The moderate width of the package ensures compatibility with standard PCB sizes, facilitating easy integration into electronic assemblies.
With a wide angle of rotation of 240°, this variable resistor offers precise control and adjustment, suitable for applications requiring fine-tuning.
Variable Resistors 3362F-1-103LF attributes and parameters. Explore more Variable Resistors devices from Bourns
Orientation (Actuator):
Type (Actuator):
Construction:
Ganging Number:
JESD-609 Code:
Diameter (Lead):
Length (Lead):
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
3362F-1-103LF Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FDC5614P
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
1N4148
Unitrode
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
MBRA160T3G
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
1N4148WT
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
3266W-1-500LF
Bourns
The Bourns 3266W-1-500LF is a CERMET trimmer pot with 50 ohm resistance, 10% tolerance, and 0.25 W power dissipation. Ideal for PCB mounting applications in temperature-sensitive environments with a range of -55 to 150 °C. Features linear resistance law, vertical actuator orientation, and screw-type actuator design.
TW1250KA
TE Connectivity's TW1250KA is a 1W POTENTIOMETER with 10% Tolerance and 100 ppm/°C Temperature Coef. Its compact size of 23.5mm x 22.6mm makes it ideal for HORIZONTAL orientation applications in various electronic circuits.
RK1631210AX9
Alps Alpine
Alps Alpine RK1631210AX9 is a 10000 ohm linear potentiometer with 6 terminals. It has a 300° rotation angle, operates at 5V voltage, and offers a tolerance of 20%. Ideal for applications requiring precise resistance adjustment in PCB mount setups.
PVZ3A104C01B00
Murata Manufacturing
Murata Manufacturing's PVZ3A104C01B00 is a 100k ohm linear trimmer resistor with 30% tolerance, suitable for surface mount applications. It operates b/w -25°C to 85°C, with a temperature coefficient of 500 ppm/°C and max voltage of 50V. The rectangular package measures 3.2mm x 3.1mm x 1.85mm, featuring a screw actuator and gold terminal finish for precise resistance adjustments up to 230° rotation angle.
3266X-1-501LF
Bourns 3266X-1-501LF is a 500 ohm, 12-turn linear trimmer resistor with CERMET technology. Operating voltage of 300V, rated power dissipation of 0.25W. Ideal for precise resistance adjustments in electronic circuits requiring high precision and reliability.
35WR10KLFTR
Tt Electronics Plc
35WR10KLFTR by Tt Electronics Plc is a 10000 ohm linear trimmer resistor with 3 terminals. Operating voltage of 50V, rated power dissipation of 0.1W, and temperature coefficient of 250 ppm/°C make it ideal for surface mount applications requiring precise resistance adjustments.
23ESA474MMF50AF
TE Connectivity's 23ESA474MMF50AF is a linear carbon film potentiometer with 470k ohm resistance, 20% tolerance, and 0.4W power dissipation. It features a circular package, horizontal actuator orientation, and through-hole mounting. Ideal for precise control applications in various electronic devices.
TSM4ZL201KR10
Vishay Intertechnology
Vishay Intertechnology's TSM4ZL201KR10 is a linear cermet trimmer resistor with 11 turns and 10% tolerance. Operating voltage of 7.07 V, rated power dissipation of 0.25 W, and temperature coefficient of 100 ppm/°C make it ideal for precision applications in electronics. Its surface mount package style and screw actuator design offer versatility in various circuit designs.
93R1A-R22-A05L
Bourns 93R1A-R22-A05L is a CERMET POTENTIOMETER with 100 ohm resistance, 10% tolerance, and 2W power dissipation. It has a single turn construction, PCB mount package style, and operates b/w -40 to 125 °C. Ideal for applications requiring precise resistance adjustments in compact spaces.
PE30L0FL223KAB
Vishay Intertechnology's PE30L0FL223KAB is a 3W POTENTIOMETER with linear resistance law, CERMET technology, and 10% tolerance. It operates b/w -55 to 125 °C and has an operating voltage of 257.7 V. Ideal for applications requiring precise resistance adjustment in electronic circuits.
1-1624217-0
TE Connectivity's 1-1624217-0 is a linear carbon film potentiometer with 10000 ohm resistance, 10% tolerance, and 0.4 W power dissipation. It has a circular package with horizontal actuator orientation and shaft actuator type. Ideal for through hole mounting applications.
PV32H500A01B00
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 50 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
3290W-1-502
Bourns 3290W-1-502 is a 5000 ohm linear wire wound trimmer resistor with 25 turns, rated for temperatures from -65 to 150 °C. It features a screw actuator, gold terminal finish, and is PCB mountable. Ideal for applications requiring precise resistance adjustments in electronic circuits.
RKS10RE
Ohmite Manufacturing
Ohmite Manufacturing's RKS10RE is a 10 ohm wire wound potentiometer with linear resistance law, 3 terminals, and 10% tolerance. It features a panel mount circular package with a 44.45mm length and 79.38mm diameter, suitable for applications requiring precise resistance adjustment in horizontal orientation. With a rated power dissipation of 100W and an actuator shaft for easy adjustment, it is ideal for use in various electronic circuits.
TS53YJ103MR10
TS53YJ103MR10 by Vishay Intertechnology is a linear variable resistor with 1 turn and a resistance of 10000 ohm. It has a temperature coefficient of 100 ppm/°C and can operate at temperatures ranging from -55 to 125 °C. This trimmer resistor is commonly used in surface mount applications for voltage control.
P160KNP-0EC15B100K
P160KNP-0EC15B100K by Tt Electronics Plc is a 100k ohm linear conductive plastic rotary potentiometer with 3 terminals. It has a 260° angle of rotation, suitable for PCB mount applications. With a rated power dissipation of 0.2W and operating temperature range from -20 to 70 °C, it's ideal for precise control in various electronic devices.
RV4NAYSD501A
Honeywell Sensing And Control
RV4NAYSD501A by Honeywell is a 500 ohm linear potentiometer with conductive plastic technology. It has a rated power dissipation of 2W and operates b/w -55 to 120°C. Ideal for panel mounting, this circular package resistor with a shaft actuator is commonly used in applications requiring precise resistance adjustments.
3296W-1-202
Bourns 3296W-1-202 is a CERMET multi-turn trimmer resistor with 2000 ohm resistance, 25 turns, and linear resistance law. It has a max operating temperature of 125 °C and is suitable for applications requiring precise voltage adjustments in electronic circuits.
62MR50LF
62MR50LF by Tt Electronics Plc is a CERMET TRIMMER resistor with linear resistance law, rated for temperatures from -55 to 125 °C. It has a max operating voltage of 200 V and power dissipation of 0.5 W, making it suitable for PCB mount applications requiring precise resistance adjustments in a compact through-hole package.
3549S-2AA-104/104A
Bourns 3549S-2AA-104/104A potentiometer features 10 turns, linear resistance law, and 100k ohm resistance. Ideal for panel mount applications with a rated power dissipation of 2W. Operating temperature range from -40 to 125°C makes it suitable for various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3362P-1-103LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3362H-1-102LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3362P-1-104LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3362P-1-102LF
Bourns 3362P-1-102LF is a CERMET trimmer resistor with 1000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It has a linear law of resistance and operates b/w -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments.
3362M-1-103LF
3362P-1-203LF
Bourns 3362P-1-203LF is a linear trimmer resistor with 20000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It is used in PCB mount applications for temperature-sensitive circuits due to its 70°C to 125°C operating range. The rectangular package with vertical actuator and screw type design make it suitable for precise adjustments in various electronic devices.
3362H-1-103LF
3362S-1-202LF
Bourns 3362S-1-202LF is a linear trimmer resistor with 2000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It has a temperature coefficient of 100 ppm/°C and operates b/w -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments.
3362R-1-104LF
Bourns 3362R-1-104LF is a CERMET trimmer resistor with 100k ohm resistance, linear law, and 10% tolerance. It has a max operating temperature of 125°C and is PCB mountable. Ideal for applications requiring precise resistance adjustments in electronic circuits.
3362H-1-503LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 50000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3362U-1-102LF
3362U-1-103LF
3362U-1-104LF
3362U-1-105LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1000000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3362U-1-202LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 2000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3362U-1-203LF
Bourns 3362U-1-203LF is a CERMET trimmer resistor with 20000 ohm resistance, linear law, and 10% tolerance. It has a max operating temperature of 125°C and is used in PCB mount applications for precise resistance adjustments. The rectangular package with through hole mounting makes it suitable for various electronic devices.
3362U-1-253LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 25000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3362U-1-501LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 500 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3362U-1-502LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3362U-1-503LF
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved