Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns 3313S-1-103E is a CERMET variable resistor with 10000 ohm resistance, linear law, and 20% tolerance. It operates b/w -55 to 125 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
Median Price
$1.660
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Farnell
1+ parts
$1.460
100+ parts
$1.180
1k+ parts
-
10k+ parts
Mouser Electronics
$1.860
$1.250
$1.000
DigiKey
$1.290
Element14
$139.450
$111.700
$83.970
Verical
$1.137
TTI
Component Electronics Inc.
$2.310
$1.730
$1.500
Chip Stock
Zilex Electronics Inc.
IBS Electronics
$1.210
$1.130
Sensible Micro Corp
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
J2 Sourcing AB
Connector Distribution Corp
Right Parts Inc.
Nova Conductors
iodParts Technologies Inc.
Kepictronics
Abacus Technologies
Perfect Parts
Argo Parts USA
Aranea Global
Continental Prestige Electronics
Suitable for a wide range of operating environments.
Easy to adjust and control the resistance in a horizontal position.
Provides high stability and reliability in various applications.
Ensures a consistent and predictable resistance change with the rotation of the actuator.
Offers a specific resistance value suitable for many electronic circuits.
Enhances solderability and conductivity for reliable connections.
Easy to mount on a PCB for efficient assembly.
Appropriate power rating for various low-power applications.
Variable Resistors 3313S-1-103E attributes and parameters. Explore more Variable Resistors devices from Bourns
Orientation (Actuator):
Type (Actuator):
Construction:
Ganging Number:
JESD-609 Code:
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Reference Standard:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Size Code:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
3313S-1-103E Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
PCN Design/Specification - 3313 Model 18/Jan/2012
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
BSS138
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
LM555CMX
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MBRM140T1G
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
SMBJ18CA
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
2N2222A
Space Power Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
Tesla Elektronicke Soucastky
1N4148WT
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STMicroelectronics
MMBT3904LT1G
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
STM32H750VBT6
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
PV36W103C01B00
Murata Manufacturing
Murata Manufacturing's PV36W103C01B00 is a 10000 ohm linear trimmer resistor with 25 turns and 10% tolerance. It has a max operating temperature of 125°C, suitable for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
P11A2V0FRSY00103MW
Vishay Intertechnology
Vishay Intertechnology P11A2V0FRSY00103MW is a 10000 ohm POTENTIOMETER with 20% Tolerance and 270° Angle Of Rotation. It operates at -55 to 125 °C, making it suitable for precise voltage control in various electronic applications. The CONDUCTIVE PLASTIC technology and CHASSIS mounting type enhance durability and performance.
3314G-1-501E
Bourns
Bourns 3314G-1-501E is a CERMET trimmer resistor with 500 ohm resistance, linear law, and 20% tolerance. It operates b/w -55 to 125 °C and has a power dissipation of 0.25 W. Ideal for applications requiring precise voltage adjustments in compact SMT designs.
3296W-1-103A
Bourns 3296W-1-103A is a CERMET multi-turn trimmer resistor with 10000 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a tolerance of 10%. Ideal for applications requiring precise voltage adjustments in circuits with up to 300 V operating voltage.
3296Y-1-204LF
Bourns 3296Y-1-204LF is a CERMET multi-turn trimmer resistor with 200k ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a tolerance of 10%. Ideal for applications requiring precise voltage adjustments in circuits with up to 300V operating voltage.
RV4NAYSD252A
Honeywell Sensing And Control
RV4NAYSD252A by Honeywell is a 2500 ohm linear potentiometer with 3 lug terminals. It has a 10% tolerance, operates b/w -55 to 120 °C, and dissipates up to 2W power. Ideal for panel mounting applications requiring precise resistance adjustments in circular packages.
23ESB104MMF50NF
TE Connectivity's 23ESB104MMF50NF is a 100k ohm logarithmic potentiometer with carbon film technology. It features a circular package, horizontal actuator, and shaft type actuator. Ideal for through hole mounting applications with a rated power dissipation of 0.4W.
3329H-1-102LF
Bourns 3329H-1-102LF is a CERMET trimmer resistor with 1000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It is used in PCB mounting applications for temperature-sensitive circuits due to its linear law of resistance and wide operating temperature range (-55 to 150 °C).
91A1A-B28-A15L
The Bourns 91A1A-B28-A15L is a linear cermet potentiometer with 10000 ohm resistance, 10% tolerance, and 2W power dissipation. It has a temperature coefficient of 150 ppm/°C and operates b/w -40 to 125 °C. Ideal for panel mount applications requiring precise resistance adjustments in a compact package.
P11S2A0BBSX10R0175
POTENTIOMETER; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3;
RV4NAYSD103A
Precision Electronics
POTENTIOMETER; Resistance: 10000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %; Diameter (Package): 1.12 mm;
M63X201KB40
Vishay Intertechnology's M63X201KB40 is a CERMET TRIMMER resistor with 10% tolerance, rated at 0.5W power dissipation. It operates b/w -55°C to 125°C, offering linear resistance law and 270° rotation angle. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact package.
PTV09A-4020F-B104
Bourns PTV09A-4020F-B104 is a linear carbon potentiometer with 100k ohm resistance, 20% tolerance, and 280° rotation angle. It is used in applications requiring precise voltage control on PCBs due to its rectangular package shape and flat terminal design.
RK09L1140A66
Alps Electric
POTENTIOMETER; Resistance: 10000 ohm; Maximum Operating Temperature: 70 Cel; Tolerance: 20 %; Size Code: 4845; Minimum Operating Temperature: -10 Cel;
M63M101KB40
Vishay Intertechnology's M63M101KB40 is a CERMET TRIMMER resistor with linear resistance law, 10% tolerance, and 270° rotation angle. It operates b/w -55 to 125 °C and is ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
3314G-1-102E
The Bourns 3314G-1-102E is a CERMET variable resistor with 1000 ohm resistance, linear law, and 20% tolerance. It operates b/w -55 to 125 °C and has a power dissipation of 0.25 W. Ideal for applications requiring precise voltage control in automotive electronics due to AEC-Q200 standard compliance.
1625939-1
TE Connectivity's 1625939-1 is a CERMET trimmer resistor with 100 ohm resistance, linear law, and 20% tolerance. Its circular package measures 16mm x 6.9mm and features a screw actuator for vertical orientation. Ideal for through hole mounting applications requiring a rated power dissipation of 1W.
73JB100K
73JB100K by Honeywell Sensing And Control is a wire wound potentiometer with a resistance of 100k ohm, linear law of resistance, and 5% tolerance. It has a rated power dissipation of 2W and operates b/w -40 to 120 °C. Used in applications requiring precise control such as volume knobs in audio equipment.
3048L-2-503
Bourns 3048L-2-503 is a compact potentiometer with 50000 ohm resistance, 20% tolerance, and 0.12 W power dissipation. Ideal for PCB mount applications, it operates b/w -55 to 125 °C with a temperature coefficient of 1000 ppm/°C.
RS45111A900F
Alps Alpine
Alps Alpine RS45111A900F is a linear potentiometer with 10000 ohm resistance, 3 terminals, and 20% tolerance. It has a slide adjust construction, operates at 10V voltage, and dissipates 0.25W power. Ideal for PCB mounting applications in temperature range of -25 to 70 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3313J-1-103E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
3313S-1-203E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 20000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
3313S-1-102E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
3313J-2-103E
3313J-1-502E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
3313J-1-105E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 1000000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
3313J-1-100E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
3313J-1-104E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
3313J-1-202E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 2000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
3313S-2-503E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 50000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
3313S-1-502E
3313J-2-502E
3313J-1-102E
Bourns 3313J-1-102E is a CERMET trimmer resistor with 1000 ohm resistance, 20% tolerance, and 0.125 W power dissipation. It is used in surface mount applications for precise voltage adjustments due to its linear resistance law and 220° rotation angle.
3313S-1-100E
3313S-1-101E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 100 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
3313S-1-104E
3313S-1-105E
3313S-1-201E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 200 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
3313S-1-500E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 50 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
3313S-1-504E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 500000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved