Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns 3262X-1-102LF is a CERMET trimmer pot with 1000 ohm resistance, 10% tolerance, and 0.25 W power dissipation. It has 12 turns, linear resistance law, and operates b/w -65 to 150 °C. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact package.
Median Price
$9.270
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
DigiKey
1+ parts
$12.340
100+ parts
$8.502
1k+ parts
$7.034
10k+ parts
-
Arrow
$6.199
Verical
Chip1Stop
Nova Conductors
$6.770
Vyrian
Electro Sonic
$7.340
VNN
EPE Components Inc.
Bristol Electronics
Semicontronic
$6.060
$5.908
$5.878
Continental Prestige Electronics
$6.634
AZTECH Wire
$11.111
Neutron USA
$39.990
Argo Parts USA
Netroflash
$6.431
$6.296
Perfect Parts
The small diameter of the lead makes it easy to fit this variable resistor into compact electronic devices.
With 12 turns, this variable resistor provides a fine level of control and precision in adjusting resistance.
This variable resistor can operate safely and reliably within a wide temperature range, making it suitable for various environments.
The horizontal actuator orientation allows for easy adjustment and setting of the resistance level.
Cermet technology provides high stability and accuracy in resistance values, ensuring consistent performance.
The rectangular package shape makes it easy to mount and secure the variable resistor onto a circuit board.
The linear law of resistance ensures a proportional and predictable relationship between the setting and the resistance value.
The trimmer pot construction allows for precise adjustment of resistance, making it ideal for calibration and tuning applications.
With a resistance value of 1000 ohm, this variable resistor can provide a wide range of resistance levels for different circuit requirements.
Having 3 terminals allows for flexibility in connecting the variable resistor within a circuit.
Variable Resistors 3262X-1-102LF attributes and parameters. Explore more Variable Resistors devices from Bourns
Orientation (Actuator):
Type (Actuator):
Construction:
JESD-609 Code:
Diameter (Lead):
Length (Lead):
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Size Code:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
3262X-1-102LF Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
1552200168
Molex
WIRE AND CABLE;
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
STM32F401CDY6TR
STMicroelectronics
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
M24308/2-1F
Cristek Interconnects
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
1N4148WS
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
4554
Jw Miller Magnetics
Other Semiconductors;
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
SMBJ18CA
Microsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
ULN2803ADWR
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
SS14
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
3856H282502A
Bourns
Bourns 3856H282502A is a CERMET POTENTIOMETER with 5000 ohm resistance, 10% tolerance, and 2W power dissipation. Linear construction, chassis mount package style make it ideal for applications requiring precise resistance adjustments in a temperature range of -65 to 125 °C.
RRS750E
Ohmite Manufacturing
Ohmite Manufacturing's RRS750E is a 750 ohm linear wire wound potentiometer with 10% tolerance. It features a 500W power dissipation rating, 3 terminals, and a circular panel mount package. Ideal for applications requiring precise resistance adjustment in horizontal orientation.
PA16NP473MAB15
Vishay Intertechnology
Vishay Intertechnology's PA16NP473MAB15 is a 47000 ohm linear potentiometer with 3 terminals. It operates b/w -40 to 85 °C and has a tolerance of 20%. Ideal for panel mount applications, it features a circular package with a diameter of 16 mm and an operating voltage of 153 V.
PS30-20PA1AR100K
Tt Electronics Plc
PS30-20PA1AR100K by Tt Electronics Plc is a 100k ohm POTENTIOMETER with VERTICAL orientation, CONDUCTIVE PLASTIC tech, and AUDIO resistance law. Ideal for PCB Mount applications, it features 6 terminals, 0.1 W power dissipation, and SLIDE actuator type.
PDA241-HRT02-503B0
Bourns PDA241-HRT02-503B0 is a 50000 ohm POTENTIOMETER with 15% Tolerance, suitable for Panel Mount applications. With a rated power dissipation of 0.5 W and operating voltage of 500 V, it operates b/w -10 to 70 °C, featuring a cylindrical package shape measuring 24.2 mm in diameter and 12.8 mm in length.
3290H-1-102
Bourns 3290H-1-102 is a 1000 ohm linear trimmer resistor with 25 turns and 5% tolerance. It has a rated power dissipation of 1W, operates b/w -65 to 150°C, and features wire wound technology. Ideal for PCB mounting applications requiring precise resistance adjustments in various electronic circuits.
3296W-1-103ALF
Bourns 3296W-1-103ALF is a CERMET multi-turn trimmer resistor with 10000 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a tolerance of 10%. Ideal for applications requiring precise voltage adjustments in electronic circuits.
3299P-1-101LF
Bourns 3299P-1-101LF is a CERMET trimmer pot with 100 ohm resistance, 25 turns, and linear resistance law. It has a rated power dissipation of 0.5 W and operates b/w -55 to 125 °C. Ideal for PCB mount applications requiring precise resistance adjustments in electronic circuits.
37PR500KLF
37PR500KLF by Tt Electronics Plc is a CERMET variable resistor with 500000 ohm resistance, suitable for PCB mounting. It has a linear law of resistance, operates b/w -30 to 100 °C, and can handle up to 250V. Ideal for applications requiring precise voltage adjustments in electronic circuits.
RK1631210AWN
Alps Alpine
Alps Alpine RK1631210AWN is a 10000 ohm linear potentiometer with 6 terminals, PCB mount package style, and 300° rotation angle. It is used in applications requiring precise resistance adjustment at temperatures ranging from -10 to 70 °C, making it ideal for audio equipment and industrial controls.
RUS1K0E
The Ohmite Manufacturing RUS1K0E is a 1000 ohm POTENTIOMETER with LINEAR resistance law, WIRE WOUND technology, and 10% tolerance. It features a 1000W power dissipation rating, HORIZONTAL orientation, and SHAFT actuator type. Ideal for PANEL MOUNT applications requiring precise resistance adjustment in a CIRCULAR PACKAGE.
3590P-1-103L
Bourns 3590P-1-103L is a 10-turn linear wire wound potentiometer with 10000 ohm resistance, suitable for PCB mount. It has a rated power dissipation of 2W, operates b/w -40°C to +125°C, and offers a tolerance of 5%. Ideal for applications requiring precise resistance adjustments in electronic circuits.
93PR50KLF
93PR50KLF by Tt Electronics Plc is a CERMET variable resistor with 50000 ohm resistance, suitable for PCB mounting. It features a linear law of resistance, thumb wheel actuator type, and can operate b/w -55 to 125 °C temperatures. Ideal for applications requiring precise voltage adjustments in electronic circuits.
PTC15LV02103A2020
Piher Sensors And Controls Sa
PTC15LV02103A2020 by Piher Sensors And Controls Sa is a CERMET POTENTIOMETER with 10000 ohm resistance, 20% tolerance, and 0.5 W power dissipation. Ideal for PCB mount applications in environments with temperatures ranging from -40 to 90 °C.
1879318-5
POTENTIOMETER; Dimensions: 17.3mm x 16mm x 7.5mm; Orientation (Actuator): HORIZONTAL;
3590S-2-501L
Bourns 3590S-2-501L is a 500 ohm POTENTIOMETER with 5% tolerance, suitable for panel mount applications. Featuring WIRE WOUND technology, it has a rated power dissipation of 2W and operates b/w -40 to 125 °C. Ideal for precise resistance adjustments in various electronic circuits.
PVG5A202C03R00
Murata Manufacturing
PVG5A202C03R00 by Murata is a 2000 ohm linear trimmer resistor with 11 turns, operating voltage of 300V, and rated power dissipation of 0.25W. It has a temperature coefficient of 150 ppm/°C and is suitable for surface mount applications in various electronic circuits requiring precise resistance adjustments.
3296X-1-103LF
Bourns 3296X-1-103LF is a CERMET trimmer resistor with 10000 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a tolerance of 10%. Ideal for applications requiring precise voltage adjustments in circuits with up to 300 V operating voltage.
53C350
Honeywell Sensing And Control
The Honeywell Sensing And Control 53C350 is a circular package potentiometer with a linear resistance of 50 ohm. It has a max operating temperature of 120°C and is suitable for panel mounting applications.
3382G-1-103G
Bourns 3382G-1-103G is a linear potentiometer with 10000 ohm resistance, 30% tolerance, and 0.05 W power dissipation. It has a vertical actuator orientation and gull wing terminal shape. Ideal for applications requiring precise voltage control in electronic circuits.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3262W-1-103LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3262X-1-503LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 50000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3262W-1-502LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3262W-1-202LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 2000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3262W-1-503
3262P-1-501LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 500 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3262W-1-202
3262W-1-201LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 200 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3262X-1-102
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3262X-1-103
3262X-1-103LF
3262X-1-100LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3262X-1-100
3262X-1-101LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3262X-1-101
3262X-1-104LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3262X-1-104
3262X-1-105LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1000000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3262X-1-105
3262X-1-201
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved