Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns 3214J-1-103E is a linear trimmer pot with 5 turns, 10000 ohm resistance, and 10% tolerance. It operates b/w -65 to 150 °C and is ideal for surface mount applications requiring precise resistance adjustments in electronic circuits.
Median Price
$1.728
Lifecycle Status
Suppliers In-Stock
27
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$0.460
100+ parts
-
1k+ parts
10k+ parts
Newark
$2.400
$1.960
$1.840
Mouser Electronics
$2.520
$1.750
$1.390
$1.260
RS Americas
$3.000
$1.950
Arrow
$1.385
$1.208
Verical
Master Electronics
$1.320
$1.210
Element14
$2.620
$2.020
DigiKey
$1.447
$1.268
Chip1Stop
$2.009
$1.345
TTI
Nova Conductors
$1.664
IBS Electronics
$1.959
$1.739
$1.557
Component Electronics Inc.
$3.460
$2.600
$2.250
Electro Sonic
$1.370
Vyrian
VNN
Inventory MP
LIBRA Elektronik GmbH
PC Components Company LLC
Atlantic Semiconductor
Connector Distribution Corp
Right Parts Inc.
J2 Sourcing AB
Bristol Electronics
Prism Electronics
Resion
Aztec Data Supply Inc.
$0.210
Benley Electronics
$0.750
Semicontronic
$1.100
$1.072
$1.067
Netroflash
Corohmni
$1.665
Allen Electronics Distributors
$3.100
$2.950
Glotronic Ltd.
Argo Parts USA
Kepictronics
Continental Prestige Electronics
$1.740
$1.130
Robosynatics
$0.024
$0.022
Lucentia Tech
SIE Connect GmbH (Excess)
ChipTracer
Having 5 turns allows for fine adjustment of resistance, making this variable resistor suitable for precise tuning applications.
With a high rated temperature, this variable resistor can operate reliably in a wide range of environments, making it versatile and durable.
The horizontal actuator orientation makes it easy to adjust the resistance setting, providing user-friendly operation.
The cermet technology used in this variable resistor offers high stability and reliability, ensuring consistent performance over time.
The rectangular package shape makes it compact and easy to integrate into electronic circuits, optimizing space efficiency.
The linear law of resistance ensures a proportional change in resistance with respect to the rotation angle, making it predictable and easy to use.
The trimmer pot construction allows for precise adjustment of resistance value, making this variable resistor ideal for calibration purposes.
The embossed packing method in a 7-inch reel ensures safe and convenient handling during transportation and storage.
With a size code of 1918, this variable resistor is standardized and compatible with a wide range of electronic applications.
The 10000 ohm resistance value offers a suitable range for various circuit configurations, making this variable resistor versatile in different designs.
Variable Resistors 3214J-1-103E attributes and parameters. Explore more Variable Resistors devices from Bourns
Orientation (Actuator):
Type (Actuator):
Construction:
JESD-609 Code:
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Size Code:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
3214J-1-103E Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
PCN Design/Specification - 3214, 3224 Series Plastic March/2011
PCN Packaging - Model 3224 ,3214 Reel Change Apr/2017
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
1N4148WS
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
TM4C1294NCPDTI3
Texas Instruments
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
M39029/58-360
Molex
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
EU2B-YS3203F
Idec
ROTARY SWITCH;
1N4148
Synsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Diotec Electronics
BAV99
National Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
SMBJ18CA
Goodwork Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
72PMR50LFTB
Tt Electronics Plc
72PMR50LFTB by Tt Electronics Plc is a CERMET variable resistor with linear resistance law, suitable for PCB mounting. With a max operating temperature of 125°C and voltage rating of 200V, it offers precise adjustment in applications requiring a resistance range from -55°C to 125°C. Its compact design with through-hole mounting makes it ideal for electronic circuits where accurate resistance control is essential.
P0915N-FC15AR50K
Tt Electronics Plc P0915N-FC15AR50K is a 50000 ohm potentiometer with conductive plastic technology. It has a rectangular package, 3 terminals, and operates b/w -10 to 70 °C. Ideal for audio applications, this PCB mount resistor features a shaft actuator and 20% tolerance for precise control in panel mounting setups.
3296W-1-102
Bourns
Bourns 3296W-1-102 is a 1000 ohm CERMET trimmer resistor with 25 turns and linear resistance law. It has a max operating temperature of 125°C, suitable for applications requiring precise resistance adjustments in electronic circuits. The through-hole mount package style makes it easy to install in various devices.
3296Y-1-500LF
Bourns 3296Y-1-500LF is a 50 ohm, 25-turn linear cermet trimmer resistor with a rated power dissipation of 0.5W. It operates b/w -55°C to 125°C and has an orientation of vertical screw actuator. Ideal for applications requiring precise resistance adjustments in circuits with operating voltages up to 300V.
PVG5A202C03R00
Murata Manufacturing
PVG5A202C03R00 by Murata is a 2000 ohm linear trimmer resistor with 11 turns, operating voltage of 300V, and rated power dissipation of 0.25W. It has a temperature coefficient of 150 ppm/°C and is suitable for surface mount applications in various electronic circuits requiring precise resistance adjustments.
92R1A-R22-B13L
Bourns 92R1A-R22-B13L is a 5000 ohm linear potentiometer with 3 terminals. It has a rated power dissipation of 1W and operates b/w -40 to 125 °C. Ideal for panel mount applications requiring precise resistance adjustments in a compact rectangular package.
3361S-1-502GLF
Bourns 3361S-1-502GLF is a CERMET trimmer resistor with 5000 ohm resistance, linear law, and 10% tolerance. It operates b/w -55 to 125 °C and has a power dissipation of 0.5 W. Ideal for applications requiring precise resistance adjustments in compact SMT designs.
RJS150
Ohmite Manufacturing
The Ohmite RJS150 is a 50W wire wound potentiometer with linear resistance law, 10% tolerance, and 300° rotation angle. Ideal for panel mount applications, it features a circular construction, horizontal actuator orientation, and chassis mounting capability.
PTA6043-2015CPB103
Bourns PTA6043-2015CPB103 is a linear potentiometer with 10000 ohm resistance, 20% tolerance, and 0.25 W power dissipation. It has a slide actuator, vertical orientation, and through-hole mounting. Ideal for applications requiring precise voltage control in PCB-mounted devices.
3296Y-1-203LF
Bourns 3296Y-1-203LF is a 20000 ohm, 25-turn linear cermet trimmer resistor with 10% tolerance. Operating voltage of 300V and rated power dissipation of 0.5W make it suitable for precise circuit adjustments in various electronic applications. With a temperature coefficient of 100 ppm/°C, it can operate b/w -55 to 125 °C effectively.
EVM3ESX50B22
Panasonic
Panasonic EVM3ESX50B22 is a 200 ohm linear trimmer resistor with 3 terminals. It operates at -40 to 100 °C, with a temperature coefficient of 250 ppm/°C. Ideal for applications requiring precise resistance adjustments in compact SMT packages.
T73XX205KT20
Vishay Intertechnology
Vishay Intertechnology's T73XX205KT20 is a CERMET trimmer resistor with 2000000 ohm resistance, 10% tolerance, and 240° rotation angle. It is used in PCB mounting applications for temperature-sensitive circuits requiring precise resistance adjustments within -55 to 125 °C range.
3224J-1-103E
Bourns 3224J-1-103E is a linear trimmer pot with 12 turns, 10000 ohm resistance, and 10% tolerance. It is used in SMT applications for precise resistance adjustments in electronic circuits.
3296W-1-104LF
Bourns 3296W-1-104LF is a CERMET multi-turn trimmer resistor with 100000 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a tolerance of 10%. Ideal for applications requiring precise voltage adjustments in electronic circuits.
3314G-1-502E
Bourns 3314G-1-502E is a CERMET variable resistor with 5000 ohm resistance, 20% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 300 V.
D225K1K5E
D225K1K5E by Ohmite Manufacturing is a 1500 ohm linear wire wound potentiometer with a rated power dissipation of 225W. It has a max operating temperature of 350°C and is commonly used in chassis mount applications.
3862C-206-104AL
Bourns 3862C-206-104AL is a linear potentiometer with 100k ohm resistance, 10% tolerance, and 1W power dissipation. It has a circular package, panel mount style, and operates b/w -40 to 125 °C. Ideal for applications requiring precise resistance adjustment in electronic circuits.
3386P-1-104LF
Bourns 3386P-1-104LF is a CERMET trimmer resistor with 100k ohm resistance, linear law, and 10% tolerance. Ideal for PCB mounting applications, it has a rated power dissipation of 0.5W and operates b/w -55°C to 125°C temperatures.
14910F0GJSX10501KA
Vishay Intertechnology's 14910F0GJSX10501KA is a CERMET variable resistor with a resistance of 500 ohm and a tolerance of 10%. It is commonly used in PCB mount applications, with a max operating temperature of 125 °C and an angle of rotation of 270°.
TS53YJ105MR10
Vishay Intertechnology's TS53YJ105MR10 is a CERMET variable resistor with 1000000 ohm resistance, 20% tolerance, and 220° rotation angle. It is used in surface mount applications with a rated power dissipation of 0.04 W and operating voltage of 200 V. Ideal for precision adjustments in electronic circuits requiring linear resistance characteristics.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3214W-1-103E
Bourns 3214W-1-103E is a linear trimmer pot with 10000 ohm resistance, rated for 0.25 W power dissipation. It has a max operating temperature of 150°C and is ideal for surface mount applications requiring precise resistance adjustments in electronic circuits.
3214J-1-104E
Bourns 3214J-1-104E is a linear trimmer pot with 100k ohm resistance, rated for 0.25W power dissipation. It has a temperature coefficient of 100 ppm/°C and operates b/w -65 to 150 °C. Ideal for applications requiring precise resistance adjustments in compact SMT packages.
3214W-1-502E
Bourns 3214W-1-502E is a linear trimmer pot with 5 turns, 5000 ohm resistance, and 10% tolerance. Ideal for surface mount applications in electronics due to its compact size (3.5mm x 5.1mm) and high operating voltage of 300V. With a temperature coefficient of 100 ppm/°C, it operates b/w -65 °C to 150 °C for precise adjustments.
3214W-1-204E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 200000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3214W-1-102E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3214W-1-503E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 50000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3214W-1-104E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3214X-1-103E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3214X-1-502E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3214W-1-202E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 2000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3214G-1-104E
3214J-1-504E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 500000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3214W-1-201E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 200 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3214X-1-203E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 20000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3214G-1-103E
3214J-1-202E
3214X-1-201E
3214W-1-203E
The Bourns 3214W-1-203E is a CERMET trimmer pot with 5 turns, 20000 ohm resistance, and linear law. It is used in applications requiring a surface mount variable resistor with a max operating temperature of 150 °C and an operating voltage of 300 V.
3214W-1-502G
3214J-1-101E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 100 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved