Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
3059Y-1-102LF by Bourns is a 1000 ohm linear trimmer resistor with 22 turns, rated for temperatures b/w -55 to 150 °C. It has a max operating voltage of 400 V and power dissipation of 1 W. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
Median Price
$9.028
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Bürklin Elektronik
1+ parts
$6.780
100+ parts
$5.560
1k+ parts
$5.040
10k+ parts
-
Farnell
$7.540
$5.970
Distrelec
$8.856
$5.236
DigiKey
$9.200
$6.338
$5.245
RS Americas
$9.310
$6.990
$6.050
Newark
$10.720
$7.690
$6.530
$6.400
Element14
$13.030
$9.340
Master Electronics
$7.280
$5.770
$5.710
Verical
$9.600
TTI
$5.900
$5.300
Nova Conductors
$6.510
Vyrian
VNN
Electro Sonic
$5.950
$5.050
$5.000
IBS Electronics
$10.670
$8.533
$8.489
Holdelec - ElecDif-Pro
AZTECH Wire
$1.720
$1.650
$1.620
$1.590
Continental Prestige Electronics
$6.380
Argo Parts USA
Perfect Parts
Netroflash
$6.185
$6.054
The small diameter of the leads makes this product suitable for compact electronic devices where space is limited.
With 22 turns, this variable resistor allows for fine adjustments and precise control over the resistance.
With a rated temperature of 70°C, this variable resistor can operate effectively in a wide range of environmental conditions.
Cermet technology provides high stability and reliability, making this variable resistor a durable choice for long-term use.
The resistance value of 1000 ohms allows for a wide range of applications in electronic circuits where specific resistance values are required.
The matte tin terminal finish ensures good electrical conductivity and prevents corrosion, enhancing the overall performance and longevity of the variable resistor.
With an operating voltage of 400 volts, this variable resistor can handle high voltages in various electronic systems without compromising its functionality.
A tolerance of 10% means that the actual resistance value of the variable resistor may vary slightly from the specified value, providing a margin of error in electronic circuit design.
Variable Resistors 3059Y-1-102LF attributes and parameters. Explore more Variable Resistors devices from Bourns
Orientation (Actuator):
Type (Actuator):
Construction:
Ganging Number:
JESD-609 Code:
Diameter (Lead):
Length (Lead):
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
3059Y-1-102LF Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
PCN Assembly/Origin - Facility Transfer Jul/2012
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
LM555CN
Rochester Electronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
SS14
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SMBJ18CA
Weitron Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
2N7002
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
MC7805CTG
Onsemi
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
Vishay Semiconductors
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
BAV99
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
Db Lectro
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
LL4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
PVZ3K104E01R00
Murata Manufacturing
Murata Manufacturing's PVZ3K104E01R00 is a 100k ohm linear trimmer resistor with 30% tolerance. It operates at temperatures ranging from -25°C to 85°C, with a temperature coefficient of 500 ppm/°C. This surface mount variable resistor is ideal for applications requiring precise resistance adjustments in compact electronic devices.
3262X-1-102LF
Bourns
Bourns 3262X-1-102LF is a CERMET trimmer pot with 1000 ohm resistance, 10% tolerance, and 0.25 W power dissipation. It has 12 turns, linear resistance law, and operates b/w -65 to 150 °C. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact package.
3852A-282-102AL
Bourns 3852A-282-102AL is a linear potentiometer with 1000 ohm resistance, 10% tolerance, and 2W power dissipation. It has a circular package, panel mount style, and operates b/w -1°C to 125°C. Ideal for applications requiring precise resistance adjustments in electronic circuits.
RK097111TD2M
Alps Electric
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .05 W; Maximum Operating Temperature: 70 Cel; Tolerance: 20 %;
RV4NAYSD102A
Ohmite Manufacturing
POTENTIOMETER; Mounting Type: PANEL MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 120 Cel; No. of Turns: 1;
533-11502
Vishay Intertechnology
Vishay Intertechnology's 533-11502 is a 3-turn linear wire wound potentiometer with 5000 ohm resistance, suitable for panel mounting. Operating voltage of 70.7 V, rated power dissipation of 1 W, and temperature coefficient of 20 ppm/°C make it ideal for precise control applications in various electronic devices.
3266X-1-203LF
Bourns 3266X-1-203LF is a CERMET trimmer resistor with 12 turns, 20000 ohm resistance, and linear law. Ideal for applications requiring precise resistance adjustments in circuits with operating voltage up to 300V. Features multi-turn construction, -55 to 150 °C temperature range, and matte tin terminal finish.
3266X-1-501LF
Bourns 3266X-1-501LF is a 500 ohm, 12-turn linear trimmer resistor with CERMET technology. Operating voltage of 300V, rated power dissipation of 0.25W. Ideal for precise resistance adjustments in electronic circuits requiring high precision and reliability.
3329H-1-105LF
Bourns 3329H-1-105LF is a linear trimmer resistor with 1000000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It operates b/w -55 to 150 °C and has a temperature coefficient of 100 ppm/°C. Ideal for PCB mounting applications requiring precise resistance adjustments in circuits.
RV4NAYSD103A
Precision Electronics
POTENTIOMETER; Resistance: 10000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %; Diameter (Package): 1.12 mm;
3306W-1-504
Bourns 3306W-1-504 is a linear trimmer resistor with 500k ohm resistance, 25% tolerance, and 0.2W power dissipation. It is used in PCB mounting applications for adjusting voltage levels with an operating range of -25 to 100°C.
TC73W-1-203E
Bourns TC73W-1-203E is a SMT POTENTIOMETER with 20000 ohm resistance, 30% tolerance, and 50V operating voltage. Ideal for applications requiring precise resistance adjustments in compact spaces due to its small package size (3.6mm x 3.1mm x 1.8mm) and wide 260° angle of rotation capability.
73JB20K
Honeywell Sensing And Control
73JB20K by Honeywell is a linear wire wound potentiometer with 20000 ohm resistance, 5% tolerance, and 2W power dissipation. It has a vertical actuator orientation, circular package shape, and shaft actuator type. Ideal for chassis mount applications with operating temperatures from -40°C to 120°C.
TS63Y202KR10
Vishay Intertechnology's TS63Y202KR10 is a 2000 ohm linear trimmer resistor with 14 turns and 10% tolerance. With a max operating temperature of 155°C, it is ideal for applications requiring precise resistance adjustments in electronic circuits. The surface mount package makes it suitable for compact designs where space is limited.
3262W-1-502LF
Bourns 3262W-1-502LF is a CERMET trimmer pot with 5000 ohm resistance, 10% tolerance, and 0.25 W power dissipation. Ideal for PCB mounting applications in temperature-sensitive environments with operating voltage up to 300 V. Features linear resistance law and 12 turns for precise adjustments.
PVG5A202C03R00
PVG5A202C03R00 by Murata is a 2000 ohm linear trimmer resistor with 11 turns, operating voltage of 300V, and rated power dissipation of 0.25W. It has a temperature coefficient of 150 ppm/°C and is suitable for surface mount applications in various electronic circuits requiring precise resistance adjustments.
3224W-1-253E
The Bourns 3224W-1-253E is a CERMET trimmer resistor with 12 turns and linear resistance law. It has a resistance of 25k ohm, tolerance of 10%, and rated power dissipation of 0.25W. Ideal for applications requiring precise resistance adjustments in compact SMT designs with operating temperatures ranging from -65 to 150°C.
3329H-1-201LF
Bourns 3329H-1-201LF is a CERMET trimmer resistor with 200 ohm resistance, linear law, and 10% tolerance. It operates b/w -55 to 150 °C and has a power dissipation of 0.5 W. Ideal for PCB mounting applications requiring precise resistance adjustments in circuits up to 300 V.
25XR100LF
Tt Electronics Plc
25XR100LF by Tt Electronics Plc is a linear variable resistor with a resistance of 100 ohm. It has a max operating temperature of 125 °C and can handle an operating voltage of 300 V. This trimmer resistor is commonly used in PCB mount applications for precise resistance adjustments.
3352P-1-502LF
Bourns 3352P-1-502LF is a linear trimmer resistor with 5000 ohm resistance, 20% tolerance, and 0.5 W power dissipation. It operates b/w -55 to 125 °C and has a temperature coefficient of 100 ppm/°C. Ideal for PCB mounting in applications requiring precise resistance adjustments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3059P-1-202LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 2000 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3059Y-1-502LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3059P-1-205LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 2000000 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3059Y-1-103LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3059P-1-205
3059Y-1-105LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1000000 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3059Y-1-500LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 50 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3059Y-1-102MLF
TRIMMER; Mounting Type: PANEL MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3059Y-1-102M
3059Y-1-103MLF
TRIMMER; Mounting Type: PANEL MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3059Y-1-104M
TRIMMER; Mounting Type: PANEL MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3059Y-1-100LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3059Y-1-100
3059Y-1-101
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3059Y-1-104LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3059Y-1-104
3059Y-1-105
3059Y-1-100MLF
TRIMMER; Mounting Type: PANEL MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3059Y-1-100M
3059Y-1-105MLF
TRIMMER; Mounting Type: PANEL MOUNT; Resistance: 1000000 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved