Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; UL Flammability Code: 94V-0; Filter Feature: NO; IEC Conformity: NO;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Headers & Edge Type Connectors 66506-318 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Berg Electronics
Additional Features:
Connector Type:
Contact Gender:
DIN Conformance:
Filter Feature:
IEC Conformity:
MIL Conformity:
Manufacturer Series:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Rows Loaded:
Option:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
66506-318 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
BERG Electronics has been a leading manufacturer and marketer of electronic interconnect systems and products for almost 50 years. By developing leading-edge technologies that became the standards for the industry, BERG continues its dedication to the best price/performance in its products and customer service. BERG gives its customers the engineered solutions they need, when they need them — whether it’s inside or outside the box! With over 105 product lines and more than 2,200 patents, BERG is one of the largest manufacturers of high-performance, high-density, and leading-edge connector systems and products in the world. Products range from board-to-board, wire-to-board, and cable-to-board connectors, sockets, fiber optic interconnects, internal and external cable assemblies. With such a broad product range, BERG products can be found in most industries including computers, telecommunications, automotive, instrumentation, medical, and consumer product applications. BERG is your connector solution! As of October 10, 1998, Berg Electronics Corporation was acquired by FCI (Framatome Connectors International, Inc.) for $1.85 billion. Amphenol Corporation acquired FCI on 8 Jan 2016, further strengthening FCI as an international connector and cable assembly solutions manufacturer of Backplane Connectors, Power Solutions, Board/Wire to Board Connectors, Input/Output Connectors, Optical Interconnect, Cable Assemblies and Flex Connectors.
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
SS14
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
1N4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
SMBJ18CA
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SN6505BDBVR
Texas Instruments
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
LL4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM555CM
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
Excel (Suzhou) Semiconductor
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
LM107H
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
746-016-520-606
Edac
Edac 746-016-520-606 is a 16-contact card edge connector with 0.125" pitch, suitable for PCB mounting. Featuring 3A signal current rating, it has a dielectric voltage of 1500VAC and operates b/w -40 to 105°C. Ideal for applications requiring high insulation resistance and UL94V-0 flammability compliance.
10151114-001TLF
Amphenol Communications Solutions
Amphenol's 10151114-001TLF card edge connector features a mating contact pitch of 0.02", UL flammability code of 94V-0, and total of 314 contacts. Ideal for board mounting with solder holding posts, this female connector has a durability of 50 cycles and is suitable for applications requiring a rated current signal of 1.1A.
61300611821
Wuerth Elektronik & Kg
61300611821 by Wurth Elektronik is a BOARD CONNECTOR with 6 contacts, rated at 3A. It features GOLD contact finish, POLYBUTYLENE TEREPHTHALATE insulator material, and operates b/w -40 to 125 °C. Ideal for commercial applications requiring a reliable connection on PCBs with a mating contact pitch of 0.1 inch.
1888247-1
TE Connectivity
TE Connectivity 1888247-1 is a 2-row board connector with liquid crystal polymer insulator. Featuring 0.031" mating contact pitch, it has a body size of 0.433"x.213"x.354". Ideal for applications requiring right angle mounting and surface mount termination, rated at 0.5A signal current.
S6B-ZR-SM4A-TF(LF)(SN)
J S T Mfg
S6B-ZR-SM4A-TF(LF)(SN) by J S T Mfg is a 6-contact board connector with mating pitch of 0.059", body width of 0.146", and termination finish of Tin over Copper. It is used in applications requiring surface mount connectors with male contact gender, right angle mounting style, and operating temperatures ranging from -25 to 85°C.
B04B-PASK-1
B04B-PASK-1 by J S T Mfg is a 4-contact male board connector with tin/lead finish, copper alloy contacts, and UL 94V-0 flammability rating. It has a terminal pitch of 2mm and solder termination, suitable for various applications requiring reliable board-to-board connections in electronic devices.
FTSH-105-01-L-DV-007-K-P-TR
Samtec
Samtec's FTSH-105-01-L-DV-007-K-P-TR is a 2-row, 9-contact board connector with a mating contact pitch of 0.05". It features tin termination with nickel barrier, rated for 3.4A signal current and operating temperatures from -55 to 125°C. Ideal for commercial applications requiring reliable male connectors on PCBs with rectangular contact patterns.
S3B-PH-SM4-TB(LF)(SN)
S3B-PH-SM4-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 2A signal current, and 800VAC dielectric voltage. Ideal for applications requiring male connectors with surface mount termination and right angle mounting style.
09185106324
Harting Electronics & Kg
09185106324 by Harting Electronics & Kg is a Headers & Edge Type Connector with Mating Contact Pitch of 0.1", Insulation Resistance of 1000000000 ohm, and Body Length of 0.807". It is used in BOARD EURO CONNECTOR applications, featuring POLARIZED HOUSING for polarization key and SOLDER termination type for durability.
851-43-025-10-002000
Mill-max Mfg
851-43-025-10-002000 by Mill-max Mfg is a BOARD CONNECTOR with 25 contacts, TIN finish. It has a terminal pitch of 1.27mm and uses SOLDER termination. Ideal for applications requiring FEMALE SOCKET connectors in STRAIGHT mounting style.
52559-2052
Molex
Molex 52559-2052 FFC/FPC connector with 20 contacts, 0.020" pitch, and 39u plating thickness. Ideal for PCB applications requiring a mating contact pitch of 2.794mm, operating temperature range from -40 to 85°C, and UL94V-0 flammability rating.
VHR-5N-BK
VHR-5N-BK by J S T Mfg is a 5-contact female board connector with a mating contact pitch of 0.156". Featuring POLYAMIDE insulation, it has an operating temperature range of -25 to 85 °C and offers high insulation resistance at 1G ohm. Ideal for commercial applications requiring reliable connections in black housings.
1-1123624-5
TE Connectivity 1-1123624-5 is a 3-row header connector with GLASS FILLED POLYESTER insulator. It has 9 contacts, rated at 8A for board mounting applications. With a temperature range of -55 to 105°C, it features SOLDERABLE RETENTION CLIPS and UL94V-0 flammability rating.
DM3AT-SF-PEJM5
Hirose Electric
The Hirose Electric DM3AT-SF-PEJM5 is a card edge connector with 8 contacts, gold termination finish, and liquid crystal polymer insulator. It has a mating contact pitch of 0.043", withstands up to 500VAC, and operates b/w -25°C to 85°C. Ideal for board mounting applications in commercial settings with durability up to 10,000 cycles.
BM03B-SRSS-TB(LF)(SN)(P)
BM03B-SRSS-TB(LF)(SN)(P) by J S T Mfg is a BOARD CONNECTOR with 0.039" pitch, 0.197" body length, and 100000000 ohm insulation resistance. It operates b/w -25 to 85 °C, has a dielectric voltage of 500VAC, and features POLARIZED HOUSING for applications requiring high signal current in PCB mounting setups.
831-43-030-30-002000
831-43-030-30-002000 by Mill-max Mfg is a BOARD CONNECTOR with 30 contacts, TIN finish. It has a terminal pitch of 2mm and is for SURFACE MOUNT applications. This FEMALE SOCKET connector mounts STRAIGHT on the board.
518-64-2
W+p Products
518-64-2 by W+p Products is a BOARD CONNECTOR with 64 contacts, rated at 1A signal current. Featuring POLYETHYLENE insulation material, it has a dielectric voltage of 800VAC and operates b/w -25 to 85°C. Ideal for cable mounting applications requiring a crimp termination type with female contact gender.
70543-0001
Molex 70543-0001 is a board connector with 0.1" pitch, suitable for commercial applications. Features include matte tin over nickel finish, glass-filled polyester insulator, and phosphor bronze contacts. With UL certification and 3A signal rating, it offers durability of 50 cycles at temperatures ranging from -40 to 105°C.
39-53-2084
Molex 39-53-2084 FFC/FPC connector with 8 contacts, 2 rows, and 0.049" pitch. POLYBUTYLENE TEREPHTHALATE insulator material. Ideal for board mounting in commercial applications requiring a reliable right-angle connection.
43645-0400
Molex 43645-0400 is a board connector with 4 contacts, featuring a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operating temperature range from -40 to 105°C. Ideal for commercial applications requiring durable female connectors with crimp termination in black polyester insulator material.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Berg Electronics
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved