Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Rows Loaded: 2; Manufacturer Series: 66506; Mounting Style: STRAIGHT;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Headers & Edge Type Connectors 66506-029 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Berg Electronics
Additional Features:
Connector Type:
Contact Gender:
DIN Conformance:
Filter Feature:
IEC Conformity:
MIL Conformity:
Manufacturer Series:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Rows Loaded:
Option:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
66506-029 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
BERG Electronics has been a leading manufacturer and marketer of electronic interconnect systems and products for almost 50 years. By developing leading-edge technologies that became the standards for the industry, BERG continues its dedication to the best price/performance in its products and customer service. BERG gives its customers the engineered solutions they need, when they need them — whether it’s inside or outside the box! With over 105 product lines and more than 2,200 patents, BERG is one of the largest manufacturers of high-performance, high-density, and leading-edge connector systems and products in the world. Products range from board-to-board, wire-to-board, and cable-to-board connectors, sockets, fiber optic interconnects, internal and external cable assemblies. With such a broad product range, BERG products can be found in most industries including computers, telecommunications, automotive, instrumentation, medical, and consumer product applications. BERG is your connector solution! As of October 10, 1998, Berg Electronics Corporation was acquired by FCI (Framatome Connectors International, Inc.) for $1.85 billion. Amphenol Corporation acquired FCI on 8 Jan 2016, further strengthening FCI as an international connector and cable assembly solutions manufacturer of Backplane Connectors, Power Solutions, Board/Wire to Board Connectors, Input/Output Connectors, Optical Interconnect, Cable Assemblies and Flex Connectors.
BAV99
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
BSS138
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
SMBJ18CA
Goodwork Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Shenzhen Socay Electronics
LL4148
Rectron
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
2N2222A
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Kingwell Technonlogy
1N4148WS
Synsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Semicoa
Lite-on Semiconductor
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
B340A-13-F
Diodes Incorporated
B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.
1N4148WT
Sangdest Microelectronics (Nanjing)
PH-R-10
Morethanall
PH-R-10 by Morethanall is a 10-contact board connector with 0.079" pitch, suitable for commercial applications. Featuring brass contacts with AU finish, it has an insulation resistance of 1G ohm and can withstand up to 800VAC. With a temperature range of -25 to 85°C, this right-angle receptacle connector is ideal for PCB mounting.
53261-1071
Molex
Molex 53261-1071 is a board connector with 0.049" pitch, 100000000 ohm insulation resistance, and 250VAC dielectric voltage. Ideal for commercial applications requiring male blade pin-skt contacts in right-angle mounting style with surface mount termination.
SSM-116-L-SV
Samtec
SSM-116-L-SV by Samtec is a board connector with a mating contact pitch of 0.1 inch and insulation resistance of 5G ohm. It is commonly used in applications requiring high temperature resistance and surface mount termination.
TMM-110-01-S-D-SM-TR
The Samtec TMM-110-01-S-D-SM-TR is a 2-row, 20-contact board connector with a mating contact pitch of 0.079". It features tin termination with nickel barrier, gold finish, and phosphor bronze contacts. Ideal for commercial applications requiring a reliable connection in temperatures ranging from -55°C to 125°C.
B4B-XH-A
J S T Mfg
B4B-XH-A by J S T Mfg is a BOARD CONNECTOR with 4 contacts, featuring Tin (Sn) over Copper (Cu) finish. It has a terminal pitch of 2.5mm and is designed for straight board mounting applications. The connector's UL Flammability Code is 94V-0, making it suitable for various electronic devices requiring reliable male contact connections.
M50-3600542R
Harwin Plc
The Harwin PLC M50-3600542R is a 10-contact female board connector with a mating contact pitch of 0.05", ideal for PCB applications. Featuring tin finish with nickel barrier, it offers high insulation resistance of 1 Gohm and operates b/w -40°C to 105°C. With durability up to 300 cycles, this UL-rated connector is suitable for commercial use in various electronic devices.
501568-0607
The Molex 501568-0607 is a board connector with a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage rating of 350VAC. It is used in applications requiring a durable, right-angle mounting style for up to 30 cycles, ideal for commercial reliability standards.
B06B-PASK-1
B06B-PASK-1 by J S T Mfg is a BOARD CONNECTOR with 6 contacts, made of COPPER ALLOY. It has Tin/Lead termination finish and 2mm terminal pitch for soldering. Ideal for applications requiring reliable male connectors in headers & edge type configurations.
22-16-2060
The Molex 22-16-2060 board connector features a mating contact pitch of 0.1", insulation resistance of 500000000000 ohm, and dielectric voltage rating of 250VAC. Ideal for PCB edge locking hook mounting, this female plug connector has a durability of 25 cycles and is rated for a max operating temperature of 105°C.
09061486901
Harting Electronics & Kg
09061486901 by Harting Electronics & Kg is a Headers & Edge Type Connector with Mating Contact Pitch of 0.2", Insulation Resistance of 1TΩ, and Dielectric Withstanding Voltage of 1550VAC. Ideal for board connections in applications requiring durability, reliability, and high current signal transmission at temperatures ranging from -65 to 125°C.
51021-0700
The Molex 51021-0700 is a board connector with 7 contacts, 0.049" pitch, and 0.413" body length. It has an insulation resistance of 100M ohm and operates b/w -40°C to 85°C. Ideal for commercial applications requiring a female crimp termination in a locking receptacle design.
B04B-PASK-1
B04B-PASK-1 by J S T Mfg is a 4-contact male board connector with tin/lead finish, copper alloy contacts, and UL 94V-0 flammability rating. It has a terminal pitch of 2mm and solder termination, suitable for various applications requiring reliable board-to-board connections in electronic devices.
10124017-1022225LF
Amphenol Communications Solutions
Amphenol's 10124017-1022225LF is a 25-contact board stacking connector with gold flash termination, suitable for PCB mounting. Featuring a mating contact pitch of 0.039", insulation resistance of 1Gohm, and dielectric voltage withstand of 707VAC, it is ideal for applications requiring high durability and signal current up to 1A.
78171-0004
Molex 78171-0004 is a board connector with 0.047" pitch, suitable for applications requiring 1.5A signal current. Featuring gold nickel finish and liquid crystal polymer insulator, it offers durability of 10 cycles. With a temperature range of -25 to 85°C, this male connector has a total of 4 contacts and is UL certified for reliability in commercial settings.
B3B-EH-A(LF)(SN)
B3B-EH-A(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 3 contacts, 0.098" pitch, and 0.394" body length. It features Tin/Copper termination for soldering applications. Ideal for use in electronic devices requiring reliable male connectors on circuit boards.
DT04-2P-E008
TE Connectivity
TE Connectivity's DT04-2P-E008 is a 2.251" x 0.675" x 0.67" board connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and 125°C. It features UL 94V-0 flammability code, polarized key, and supports up to 13A signal current. Ideal for cable mounting applications requiring a male contact gender with strain relief option.
70107-0002
Molex 70107-0002 is a board connector with 0.1" pitch, GLASS FILLED POLYESTER insulator, and -40 to 105°C operating range. Ideal for cable mounting applications requiring a polarized rib key, UL94V-0 flammability rating, and SQ PIN-SKT male contacts.
DF40HC(3.0)-100DS-0.4V(51)
Hirose Electric
DF40HC(3.0)-100DS-0.4V(51) by Hirose Electric is a 2-row stacking connector with 100 contacts, gold-plated for durability and signal current up to 0.3A. Featuring liquid crystal polymer insulation, it offers high dielectric voltage of 100VAC and operates b/w -35°C to 85°C. Ideal for board mounting applications requiring reliable female connectors with bellowed contact style and locking option.
20021121-00010C4LF
Amphenol Communications Solutions' 20021121-00010C4LF is a board connector with a mating contact pitch of 0.05 inch and insulation resistance of 100MΩ. It is commonly used in commercial applications, offering durability with 100 cycles and a max operating temperature of 105°C.
VHR-2N-BL
BOARD CONNECTOR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Berg Electronics
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved