Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM AND DATACOM CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Telecom & Datacom Connectors SS-39200-017 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Bel Fuse
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
SS-39200-017 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Founded in 1949, Bel designs, manufactures and markets a broad array of products that power, protect and connect electronic circuits. With over 70 years of experience, Bel has reliably demonstrated the ability to succeed in a variety of product areas.
BAV99
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WS
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Pulse Electronics
Taiwan Semiconductor
1N4148
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
2N7002
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
BSS138LT1G
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
Synsemi
NE555D
Texas Instruments
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
MBRS1100T3G
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
104004-0501
Molex
The Molex 104004-0501 is a Telecom & Datacom Connector with TIN over Nickel finish. Featuring 5 contacts, it offers durability of 5000 cycles and solder termination. Ideal for telecom and datacom applications, this male plug connector has a straight mounting style and USB contact pattern.
87824-0010
Molex 87824-0010 is a Telecom & Datacom Connector with 29 contacts, Matte Tin finish, and Glass Filled Liquid Crystal Polymer insulator. It has a body length of 1.682", suitable for board mounting applications in telecom and datacom systems. The connector is polarized, durable up to 500 cycles, and operates b/w 0°C to 55°C temperature range.
RJHSE-5384-04
Amphenol
RJHSE-5384-04 by Amphenol is a Telecom & Datacom Connector with 4 ports and 8 contacts. Featuring Matte Tin finish, it has a body length of 2.51", width of 0.53", and depth of 0.62". Ideal for board and panel mounting, this connector uses POLYETHYLENE insulator material and has a shell made of COPPER ALLOY.
20825000002
Harting Electronics & Kg
20825000002 by Harting Electronics & Kg is a Telecom & Datacom Connector with 8 contacts, rated at 1.18A signal current. It features a dielectric voltage of 1000VDC and insulation resistance of 500MΩ, suitable for applications requiring polarized housing and IDC termination in telecom and datacom systems.
74441-0001
Molex 74441-0001 is a telecom/datacom connector with 0.031" mating contact pitch, suitable for board mounting in commercial applications. Features include brass contacts, matte tin finish, and glass-filled polyethylene insulator material. Ideal for right-angle mounting with staggered PCB contact pattern.
43860-0016
Molex 43860-0016 is a telecom and datacom connector with a body length of 0.645", width of 0.533", and depth of 0.62". It has an insulation resistance of 500MΩ and is commonly used in board mounting applications.
SI-60118-F
Bel Fuse
Bel Fuse SI-60118-F is a Telecom & Datacom Connector with 0.708" body length, 0.599" width, and 0.85" depth. It features POLYETHYLENE insulator material, NICKEL/TIN shell finish, and 8 contacts for board and panel mounting. Ideal for telecom applications due to its polarized housing, right angle mounting style, and solder termination type.
3000
Winchester Interconnect
TELECOM AND DATACOM CONNECTOR; Contact Gender: MALE; Body or Shell Style: PLUG; DIN Conformance: NO; MIL Conformity: NO; IEC Conformity: NO;
UJ31-CH-3-MSMT-TR-67
Cui
Cui's UJ31-CH-3-MSMT-TR-67 USB connector features 24 contacts, POLYAMIDE46 insulator, and NICKEL shell finish. Ideal for telecom/datacom applications with a 100VAC dielectric voltage, -40 to 80°C operating range, and UL94V-0 flammability rating. Suitable for board mounting with a right-angle design and locking option for durability up to 10k cycles.
10033526-N3212MLF
Amphenol Communications Solutions
Amphenol's 10033526-N3212MLF is a USB connector with matte tin finish, rated at 1A signal current. Featuring a dielectric voltage of 100VAC, it has a durability of 5000 cycles and insulation resistance of 100M ohm. Ideal for telecom/datacom applications, this right-angle receptacle offers reliable performance in commercial settings.
74320-1003
74320-1003 by Molex is a Telecom & Datacom Connector with 0.075" pitch, 1.45" body length, and 1000000000 ohm insulation resistance. It is used in applications requiring a connector with 29 contacts, right-angle mounting style, and solder termination for commercial reliability.
7499011222A
Wuerth Elektronik & Kg
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: TIN OVER NICKEL; JESD-609 Code: e3; Termination Contact Finish: TIN OVER NICKEL;
MUSB-C111-30
MUSB-C111-30 by Amphenol is a USB connector with 1.201" body length, 1000000000 ohm insulation resistance, and 500VAC dielectric voltage. It is ideal for telecom & datacom applications, featuring POLYETHYLENE insulator material, GOLD mating contact finish, and a durability of 1500 cycles. With a rated current of 1.5A and UL flammability rating of 94V-0, this connector offers reliable performance in commercial settings.
292336-1
TE Connectivity
TE Connectivity's 292336-1 USB connector features matte tin finish, polyethylene insulator, and copper alloy contacts. With a rated current of 1A, it is ideal for telecom & datacom applications requiring high durability and reliability in temperatures ranging from -55 to 85°C.
RJHSE-5381-04
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Type: BOARD; Insulator Material: POLYETHYLENE; Termination Type: SOLDER;
446610002
Molex 446610002 is a Telecom & Datacom Connector with GLASS FILLED POLYAMIDE insulator. Featuring 8 contacts, it uses SNAP FIT termination on BOARD AND PANEL mount. Ideal for telecom and datacom applications due to its FEMALE contact gender and JACK body style with UL 94V-0 flammability rating.
85513-5013
Molex 85513-5013 is a Telecom & Datacom Connector with 0.63" body length, 500000000 ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for telecom/datacom applications, it features TIN OVER NICKEL termination finish, GLASS FILLED LCP insulator, and operates b/w -40 to 80°C.
500075-0517
The Molex 500075-0517 USB connector features TIN over nickel termination, glass-filled plastic insulator, and copper alloy contacts. Ideal for telecom & datacom applications, this female receptacle has a total of 5 contacts and is mounted on a board using solder termination.
87520-0010BLF
The Amphenol Communications Solutions 87520-0010BLF is a USB connector with 4 contacts, rated at 1.5A signal current. It features a dielectric voltage of 750VAC and insulation resistance of 1Gohm, suitable for telecom applications. With a durable design lasting up to 1500 cycles, it offers reliable performance in temperatures ranging from -40°C to 85°C.
67298-4090
Molex 67298-4090 USB connector features glass-filled polybutylene terephthalate insulator, solder termination, and right-angle mounting. With 8 contacts in a rectangular PCB pattern, it is ideal for telecom/datacom applications requiring reliable commercial-grade connectivity.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved