Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bel Fuse 08261X1TGJ-F is a Telecom & Datacom Connector with 8 contacts, Nickel shell finish, and Polyamide/Polyethylene insulator. It features a filter and solder termination, suitable for board and panel mounting in applications requiring UL94V-0 flammability code compliance.
Median Price
$7.653
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Verical
1+ parts
$5.100
100+ parts
$4.850
1k+ parts
-
10k+ parts
Arrow
$6.873
$5.185
$4.200
$3.853
DigiKey
$7.170
$5.178
$4.472
$4.346
RS (Exports)
$8.136
$7.502
Farnell
$8.907
$5.796
$5.603
Element14
$11.070
$10.540
Newark
$12.420
$9.630
$8.710
Master Electronics
$5.080
$4.360
Nova Conductors
$5.030
TME
$11.400
$8.000
VNN
Bristol Electronics
Vyrian
Electro Sonic
$4.530
IBS Electronics
$7.307
$6.271
Classic Components Corporation
Electronics Depot
Prism Electronics
ACDS - Activité Composants Distribution Service
Ampacity Inc.
$5.210
Continental Prestige Electronics
$6.880
$4.480
Authorized Procurement Solutions
Netroflash
$4.929
$4.779
$4.678
The filter feature helps to reduce electromagnetic interference and noise, ensuring a stable and reliable connection for telecom and datacom applications.
Polyamide and polyethylene are known for their high insulation properties, providing excellent electrical protection and reducing the risk of short circuits.
Nickel shell finish offers corrosion resistance and durability, making the connector suitable for long-term use in various environments.
Specifically designed for telecom and datacom applications, ensuring compatibility and optimal performance in such systems.
Having a 94V-0 flammability rating means the connector is highly flame retardant and meets safety standards for equipment in telecommunications and data communications.
With 8 contacts, this connector can handle a higher amount of data transmission, making it suitable for complex telecom and datacom systems.
Supports both board and panel mounting options, providing flexibility in installation and compatibility with different types of equipment.
Copper alloy shell material offers good conductivity and durability, ensuring a stable and reliable connection for telecom and datacom applications.
Solder termination provides a robust and secure connection method, ideal for applications where vibration or mechanical stress may be present.
Female contact gender ensures compatibility with male connectors, allowing for easy and secure connections in telecom and datacom setups.
Right angle mounting style saves space and allows for efficient cable management in tight or limited spaces, making it a practical choice for telecom and datacom installations.
Telecom & Datacom Connectors 08261X1TGJ-F attributes and parameters. Explore more Telecom & Datacom Connectors devices from Bel Fuse
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mixed Contacts:
Mounting Style:
Mounting Type:
Option:
Shell Finish:
Shell Material:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
08261X1TGJ-F Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - 0826 1x1 ICM Design 16/Jun/2016 Updated Plating 06/Jun/2018
Founded in 1949, Bel designs, manufactures and markets a broad array of products that power, protect and connect electronic circuits. With over 70 years of experience, Bel has reliably demonstrated the ability to succeed in a variety of product areas.
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
BSS138
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
LM317TG
Texas Instruments
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
2N2222A
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
1N4148
Nexperia
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MBR0520LT3G
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
Dc Components
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
PIC18F4550-I/PT
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
Semiconductor Technology
Space Power Electronics
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
2301994-1
TE Connectivity's 2301994-1 is a telecom & datacom connector with EMI shielding, liquid crystal polymer insulator, and nickel-plated brass shell. It has 8 contacts, right-angle mounting style, and operates b/w -40°C to 85°C. Ideal for telecommunications and data communication applications requiring secure board mounting.
67068-9000
Molex
Molex 67068-9000 USB connector with 4 contacts, rated at 1.5A signal current, features glass-filled polyester insulation and solderable retention clips for board mounting. With a dielectric voltage of 750VAC, it is ideal for telecom & datacom applications requiring durable connectors with right-angle mounting style and polarized housing key.
USB3075-30-A
Global Connector Technology
USB3075-30-A by Global Connector Technology is a USB connector with 5 contacts, rated for 1A signal current. It features gold over nickel termination finish, liquid crystal polymer insulator material, and stainless steel shell. Ideal for telecom/datacom applications, it has a dielectric voltage of 500VAC and operates b/w -30°C to 85°C.
MUSB-05-F-B-SM-A-FR
Samtec
Samtec's MUSB-05-F-B-SM-A-FR is a USB connector with LIQUID CRYSTAL POLYMER insulator, suitable for Telecom & Datacom applications. Featuring 5 contacts, it has a durability of 1500 cycles and operates b/w -50 to 85°C. With a right-angle mounting style and surface mount termination, it offers a plating thickness of 1u inch.
DX07S024JJ3R1300
Japan Aviation Electronics Industry
USB CONNECTOR;
6339160-1
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Rated Current - Signal: 1.5 A; MIL Conformity: NO; No. of Rows Loaded: 1;
43860-0012
Molex 43860-0012 is a telecom & datacom connector with 0.645" body length, 0.533" width, and 0.62" depth. Insulation resistance of 500M ohm, operating temp range -40 to 85°C. Ideal for board mounting in commercial applications requiring a female contact style with right-angle mounting option.
54602-908LF
Amphenol Communications Solutions
54602-908LF by Amphenol is a telecom & datacom connector with 0.602" body length, 500M ohm insulation resistance, and 1400VAC dielectric voltage. Ideal for board mounting in applications requiring a durable, right-angle female jack connector with solder termination and UL certification.
61400416021
Wuerth Elektronik & Kg
61400416021 by Wurth Elektronik is a USB connector with 4 contacts, gold termination finish, and 750VAC dielectric voltage. Ideal for telecom/datacom applications, it offers high insulation resistance of 1Gohm, operates b/w -40 to 105°C temperatures, and has a durable design rated for 1500 cycles.
SS-7188S-A-NF-50
Bel Fuse
Bel Fuse SS-7188S-A-NF-50 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 50u plating thickness, and NICKEL/TIN shell finish. It has 8 contacts in a polarized housing for PCB mounting at 2.54mm pitch. Ideal for commercial applications requiring right angle mounting with solder termination.
XP1001000-05R
Lantronix
The Lantronix XP1001000-05R is a Telecom & Datacom Connector with 8 contacts, POLYETHYLENE insulator, and right angle mounting style. It has a temperature range of -40 to 85°C. Ideal for commercial applications requiring reliable board-mounted connectors.
3012
Winchester Interconnect
TELECOM AND DATACOM CONNECTOR; Contact Gender: FEMALE; Mixed Contacts: NO; MIL Conformity: NO; Filter Feature: NO; IEC Conformity: NO;
5749621-7
TE Connectivity 5749621-7 is a Telecom & Datacom Connector with 68 contacts, 0.05" mating pitch, and 2 rows loaded. It has EMI shielding, operates b/w -55°C to 105°C, and uses IDC termination for cables. Ideal for commercial applications requiring high insulation resistance and UL certification.
12401899E412A
The Amphenol Communications Solutions 12401899E412A is a USB connector with 24 contacts, rated for 5A signal current. It features a dielectric voltage of 100VAC and insulation resistance of 100M ohm, suitable for telecom and datacom applications. With a waterproof option and stainless steel shell material, it offers durability with 10k cycles.
RJHSE-5381-06
Amphenol
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
44144-0005
The Molex 44144-0005 is a telecom & datacom connector with 0.52" body length, 500M ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for board mounting applications in telecom and datacom systems, featuring a durable design with matte tin over nickel finish for reliability in commercial settings.
1543
Delphi Connection Systems
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; MIL Conformity: NO; Mixed Contacts: NO;
MUSB-C111-30
MUSB-C111-30 by Amphenol is a USB connector with 1.201" body length, 1000000000 ohm insulation resistance, and 500VAC dielectric voltage. It is ideal for telecom & datacom applications, featuring POLYETHYLENE insulator material, GOLD mating contact finish, and a durability of 1500 cycles. With a rated current of 1.5A and UL flammability rating of 94V-0, this connector offers reliable performance in commercial settings.
500075-0517
The Molex 500075-0517 USB connector features TIN over nickel termination, glass-filled plastic insulator, and copper alloy contacts. Ideal for telecom & datacom applications, this female receptacle has a total of 5 contacts and is mounted on a board using solder termination.
3034
TELECOM AND DATACOM CONNECTOR; Contact Gender: FEMALE; Additional Features: STAGGERED CONFIGURATION, MAX CONTACTS (SERIES)=4; Body or Shell Style: JACK; IEC Conformity: NO; DIN Conformance: NO;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
0826-1X1T-GH-F
Bel Fuse 0826-1X1T-GH-F is a telecom & datacom connector with body dimensions of 0.752" x 0.591" x 1.29". It features POLYETHYLENE POLYAMIDE insulator, TIN finish, and NICKEL shell. Suitable for board and panel mounting, it has 8 contacts, UL 94V-0 flammability rating, and operates b/w -40°C to 85°C.
08261G1T23-F
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
08261G1T43-F
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 2100VAC; UL Flammability Code: 94V-0;
0826-1X1T-23-F
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Ports: 1; Additional Features: INBUILT TRANSFORMER, SHIELDED;
08261X1T32-F
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; PCB Contact Pattern: STAGGERED; Board Mounting Option: BOARD LOCK;
08261A1T23-F
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Shell Material: COPPER ALLOY; Mixed Contacts: NO;
08261X1TM1-F
Bel Fuse's 08261X1TM1-F is a Telecom & Datacom Connector with 8 contacts, featuring a Nickel shell finish and Polyamide/Polyethylene insulator material. Ideal for board and panel mounting, this connector type is designed for applications requiring a filter feature, UL94V-0 flammability code compliance, and solder termination in female contact gender configuration.
08261X1T43-F
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Termination Contact Finish: NOT APPLICABLE; UL Flammability Code: 94V-0;
08261K1T43-F
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Shell Finish: NICKEL; Mixed Contacts: NO; Termination Contact Finish: NOT APPLICABLE;
08261L1T57-F
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: BOARD AND PANEL; Mixed Contacts: NO; DIN Conformance: NO;
0826-1X1T-57
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: LOCKING; UL Flammability Code: 94V-0; No. of PCB Rows: 3;
08261K1T23-F
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: POLYAMIDE46/POLYETHYLENE; Mixed Contacts: NO; DIN Conformance: NO;
08261C4T43-F
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Terminal Length: .125 inch; Termination Contact Finish: NOT APPLICABLE; Mounting Style: RIGHT ANGLE;
0826-1X1T-80
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mounting Option-1: LOCKING; Body or Shell Style: JACK;
0826-1X1T-80-F
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Shell Material: COPPER ALLOY; Mounting Type: BOARD AND PANEL; Mating Contact Finish: NOT SPECIFIED;
0826-1X1T-AC-F
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mounting Style: RIGHT ANGLE; Termination Type: SOLDER;
0826-1X2T-23-F
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 16; Shell Finish: NICKEL; Mounting Style: RIGHT ANGLE;
0826-1X1T-23
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: PLASTIC; No. of PCB Rows: 2; Additional Features: STANDARD: RJ45;
0826-1B4T-23
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: POLYETHYLENE; MIL Conformity: NO; Termination Type: SOLDER;
0826-1X1T-JKB-F
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 2250VDC; Mixed Contacts: NO; Body Depth: 1.29 inch;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved