Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bel Fuse 0678L9100-02 is a 10A fuse with 50J nominal joule integral and 250V AC voltage rating. It has a trip time of 60s, suitable for electric circuit protection in applications requiring medium blow characteristic. Dimensions are 9.8mm x 3.05mm x 3.05mm, with surface mounting feature and CUL; UL reference standard compliance.
Median Price
$0.712
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$1.030
100+ parts
$0.727
1k+ parts
$0.480
10k+ parts
$0.431
Newark
$1.080
$0.788
$0.592
-
DigiKey
$1.240
$0.555
Master Electronics
$0.405
$0.369
Verical
$0.531
$0.454
Element14
$0.483
$0.439
Farnell
$0.553
$0.415
$0.353
Nova Conductors
Electro Sonic
$0.417
IBS Electronics
$0.590
$0.537
Vyrian
TME
$0.634
Sensible Micro Corp
VNN
ACDS - Activité Composants Distribution Service
Argo Parts USA
$0.461
$0.447
Aranea Global
$0.473
Continental Prestige Electronics
$0.668
$0.495
$0.368
$0.346
Ampacity Inc.
$0.680
Aztec Data Supply Inc.
$2.530
GreenTree Electronics
Glotronic Ltd.
Higher joule integral means better protection against power surges and spikes, ensuring the safety of the connected equipment.
Suitable for a wide range of AC voltage applications, providing flexibility and compatibility.
The delay allows for temporary power fluctuations to stabilize without triggering the fuse, reducing unnecessary blows.
Compact size makes it suitable for applications where space is limited or where smaller fuses are preferred.
Able to handle a current of up to 10 A without blowing, providing reliable protection for connected devices.
Can withstand high temperatures, ensuring reliable operation in various environmental conditions.
Medium blow characteristic balances between fast response to overloads and protection against false triggers.
High breaking capacity ensures that the fuse can safely interrupt currents up to 100 A without damage.
Surface mount design makes installation easier and more convenient, especially in compact electronic devices.
Compliance with recognized safety standards ensures the quality and reliability of the product.
Fuses 0678L9100-02 attributes and parameters. Explore more Fuses devices from Bel Fuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated DC Voltage:
Body Diameter:
Body Height:
Body Width:
Dimensions:
Blow Characteristic:
Fuse Size/Group:
Trip Time/Delay:
Additional Features:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
JESD-609 Code:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
0678L9100-02 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.10.00.40
SB
Founded in 1949, Bel designs, manufactures and markets a broad array of products that power, protect and connect electronic circuits. With over 70 years of experience, Bel has reliably demonstrated the ability to succeed in a variety of product areas.
SS14
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
2N2222A
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Goodwork Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
4554
Jw Miller Magnetics
Other Semiconductors;
LL4148
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
2N7002
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
FDLL4148
National Semiconductor
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
Onsemi
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
1N4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;
ABS06-32.768KHZ-T
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
Sensitron Semiconductor
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
179020.1
Siba
Siba 179020.1 is a 5x20mm fuse with a rated current of 1A and rated voltage of 250V. It has a very fast blow characteristic and a nominal joule integral of 1.5J, making it suitable for circuit protection in various applications.
ATDR30
Mersen S A
The Mersen S A ATDR30 fuse is a 30A time delay electric fuse with a rated AC voltage of 600V and rated DC voltage of 300V. It has a body length/diameter of 10.4mm, body height of 38.1mm, and blow characteristic suitable for inline/holder mounting applications. This CSA and UL standard compliant fuse offers circuit protection with a high breaking capacity of 200kA.
39611000440
Littelfuse
Littelfuse 39611000440 fuse has a rated current of 1A and nominal joule integral of 2.2J, suitable for circuit protection with a rated AC voltage of 125V. With blow characteristic as time lag, it offers trip time of 60s and operates in temperatures ranging from -40°C to 85°C.
0437002.WR
Littelfuse 0437002.WR fuse, rated at 63V and 2A, offers fast blow characteristic with trip time of 1s. With dimensions of 3.2mm x 1.63mm x 0.82mm, it is ideal for circuit protection in applications requiring surface mount fuses with high breaking capacity up to 50A.
0251001.MRT1L
Littelfuse 0251001.MRT1L PICO fuse, rated 1A at 125V, offers very fast blow characteristic in a compact size of 2.8mm x 7.11mm. Ideal for supplemental circuit protection in applications requiring quick response to overcurrent events with a trip time of 0.004s. Suitable for use in various industries due to its high breaking capacity and wide operating temperature range from -55°C to 125°C.
KTK-R-25
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 25 A; Terminal Shape: END CAP; Terminal Finish: NICKEL;
ATDR20
ATDR20 by Mersen S A is a 20A time delay electric fuse with 600V AC and 300V DC ratings. Featuring a body size of 10.4mm x 38.1mm, it has an END CAP terminal shape and inline/holder mounting for circuit protection in various applications meeting CSA and UL standards.
3413.0330.22
Schurter Ag
Schurter Ag's 3413.0330.22 fuse, rated at 15A and 32V, features a time lag blow characteristic with dimensions of 3.2x1.6x0.6mm. Ideal for circuit protection in applications requiring a surface mount fuse with a pre arcing rating of 65 A2/s and UL/CUL reference standard compliance.
ANN-50
Eaton Corporation
Eaton Corporation's ANN-50 fuse, with 125V AC and 80V DC voltage ratings, offers a very fast blow characteristic and 2500A breaking capacity. Measuring 81mm x 22.2mm, it features TAB/BLADE terminals for surface mount applications, providing reliable circuit protection with built-in indicator feature.
BK/ATM-3
The Eaton Corporation BK/ATM-3 fuse is a 32V, 3A fast blow electric fuse with a rated breaking capacity of 1000A. Measuring 10.92mm x 3.81mm x 8.81mm, it features TAB/BLADE terminals and UL reference standard for inline mounting applications in circuits requiring reliable overcurrent protection up to 100°C.
BK/ATM-15
Eaton Corporation's BK/ATM-15 fuse, with 15A rated current and 32V rated voltage, features fast blow characteristic and 1000A breaking capacity. Measuring 10.92mm x 3.81mm x 8.81mm, it is used for electric circuit protection in applications requiring a temperature range of -40°C to 100°C and UL standard compliance.
02183.15HXP
The Littelfuse 02183.15HXP fuse is a 3.15A, 250V time lag electric fuse with dimensions of 5x20mm. It has a rated breaking capacity of 35A and a nominal joule integral of 38.15J, making it suitable for circuit protection in various applications requiring supplemental fuses. This fuse meets standards such as CCC, CE, CSA, IEC, KC, PSE, SEMKO, UL, and VDE for reliable performance in inline/holder mounting configurations.
FNQ-R-2-1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 2.5 A; Terminal Shape: END CAP; Manufacturer Series: FNQ-R;
LP-CC-6/10
Eaton Corporation LP-CC-6/10 fuse, rated 600V AC/0.6A, with time delay blow characteristic. Inline/holder mounting for circuit protection in CE/CSA/UL compliant applications. Dimensions: 10mm x 38.1mm, body height 38mm, and rated breaking capacity of 200kA.
ATM10
The Mersen S A ATM10 fuse is a 10A, 600V fast-blow electric fuse with a midget size and end cap terminal shape. It has a rated breaking capacity of 100kA and is suitable for inline/holder mounting in various applications requiring circuit protection. Compliant with CSA and UL standards, it measures 10mm x 38mm.
ERBRE2R00V
Panasonic
The Panasonic ERBRE2R00V is a 0603 size fuse with a rated current of 2A and a max operating temperature of 125°C. It is designed for circuit protection in applications requiring fast blow characteristics, such as surface mount electronics.
LP-CC-30
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 30 A; Terminal Shape: END CAP;
ATC-30
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 30 A; Terminal Shape: TAB/BLADE; Body Length/Diameter: 19.3 mm;
LPJ-50SP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 50 A; Terminal Shape: END CAP;
ATDR17-1/2
Mersen S A's ATDR17-1/2 fuse, rated 17.5A and 600V AC, features time delay blow characteristic for circuit protection with a high breaking capacity of 200kA. Its compact size (10.4mm x 38.1mm) and end cap terminal shape make it ideal for inline mounting applications requiring UL and CSA standards compliance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
0678L9300-02
Bel Fuse
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 72 V; Rated Current: 30 A; Terminal Shape: WRAPAROUND;
0678L9250-02
ELECTRIC FUSE; JESD-609 Code: e4; Terminal Finish: Silver (Ag) - with Nickel (Ni) barrier;
0678H9400-02
Bel Fuse 0678H9400-02 is a 40A fuse with 1000J nominal joule integral and 250V rated AC voltage. Ideal for circuit protection in automotive, industrial, or consumer electronics applications due to its AEC-Q200 compliance and high breaking capacity of 100A.
0678L9150-02
Bel Fuse 0678L9150-02 is a 15A fuse with 110J nominal joule integral and 250V AC voltage rating. It has medium blow characteristic, CE/CUL/UL reference standards, and is ideal for electric circuit protection in applications requiring surface mount fuses.
0678-9300-M2
ELECTRIC FUSE; Rated Current: 30 A; Packing Method: TAPE AND REEL; Rated Breaking Capacity: 100 A; Dimensions: 9.8mm x 3.05mm x 3.05mm; Terminal Finish: Matte Tin (Sn);
0678H9300-02
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 30 A; Terminal Shape: WRAPAROUND;
0678H2000-02
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 2 A; Terminal Shape: WRAPAROUND;
0678H2000-22
0678H9150-02
Bel Fuse 0678H9150-02 is a 15A fuse with 220J nominal joule integral and 250V rated AC voltage. It has trip time of 60s, suitable for electric circuit protection in automotive applications. With AEC-Q200, CUL, CE, UL certifications, it offers reliable performance from -55 to 125 °C operating temperature range.
0678L9200-02
Bel Fuse 0678L9200-02 is a 20A fuse with 250V AC/72V DC rated voltage, suitable for electric circuit protection. It has a trip time of 60s and nominal joule integral of 270J, meeting UL standards. With medium blow characteristic and surface mount feature, it ensures reliable performance in various applications.
0678D1600-02
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 350 V; Rated DC Voltage: 125 V; Rated Current: 1.6 A; Terminal Shape: WRAPAROUND;
0678D3150-22
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 350 V; Rated DC Voltage: 125 V; Rated Current: 3.15 A; Terminal Shape: WRAPAROUND;
0678D1600-22
0678D0630-22
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 350 V; Rated DC Voltage: 250 V; Rated Current: .63 A; Terminal Shape: WRAPAROUND;
0678D4000-22
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 350 V; Rated DC Voltage: 125 V; Rated Current: 4 A; Terminal Shape: WRAPAROUND;
0678D1250-22
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 350 V; Rated DC Voltage: 125 V; Rated Current: 1.25 A; Terminal Shape: WRAPAROUND;
0678D5000-22
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 350 V; Rated DC Voltage: 125 V; Rated Current: 5 A; Terminal Shape: WRAPAROUND;
0678D0500-02
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 350 V; Rated DC Voltage: 250 V; Rated Current: .5 A; Terminal Shape: WRAPAROUND;
0678H8000-22
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 8 A; Terminal Shape: WRAPAROUND;
0678H9350-22
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 35 A; Terminal Shape: WRAPAROUND;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved