Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bel Fuse 0678H2000-22 is a 2A electric fuse with 250V AC/125V DC rated voltage, suitable for circuit protection. It has a trip time of 60s, nominal joule integral of 1J, and rated breaking capacity of 300A. With AEC-Q200, CUL, CE, and UL certifications, it's ideal for surface mount applications requiring reliable overcurrent protection.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
VNN
Nova Conductors
Ampacity Inc.
$0.210
AZTECH Wire
$1.260
$1.210
$1.190
$1.160
Aztec Data Supply Inc.
$19.250
Argo Parts USA
Continental Prestige Electronics
Aranea Global
This high joule rating ensures that the fuse can handle high energy surges, providing reliable protection for your circuit.
The 60-second trip time allows the fuse to respond quickly to overcurrent situations, preventing damage to your equipment.
With a rated current of 2 A, this fuse is suitable for low to medium current applications, ensuring proper protection without unnecessary tripping.
The high maximum operating temperature of 125°C allows this fuse to withstand elevated temperatures, enhancing its reliability in various environments.
The surface mount feature makes installation easy and convenient, saving time and effort during assembly.
Fuses 0678H2000-22 attributes and parameters. Explore more Fuses devices from Bel Fuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated DC Voltage:
Rated Voltage:
Body Diameter:
Body Height:
Body Width:
Fuse Size/Group:
Trip Time/Delay:
Additional Features:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
JESD-609 Code:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
0678H2000-22 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.10.00.40
SB
Founded in 1949, Bel designs, manufactures and markets a broad array of products that power, protect and connect electronic circuits. With over 70 years of experience, Bel has reliably demonstrated the ability to succeed in a variety of product areas.
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
1N4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
EU2B-YS2J03C
Idec
ROTARY SWITCH;
SMBJ18CA
Semtech
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
MBR0520LT3G
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
1N4148WS
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
ABS25-32.768KHZ-1-T
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
LP-CC-1-8/10
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 1.8 A; Terminal Shape: END CAP;
0468001.NRHF
Littelfuse
Littelfuse 0468001.NRHF fuse, rated at 1A and 63V, features a trip time of 0.0015s. With dimensions of 3.18mm x 1.52mm x 0.58mm, it is ideal for circuit protection in applications requiring a time delay blow characteristic. Compliant with CSA, CUL, and UL standards, it offers a max operating temperature of 90°C and matte tin terminal finish for surface mount installation.
FNQ-R-17-1/2
Eaton Corporation
Eaton Corporation's FNQ-R-17-1/2 fuse, rated at 17.5A and 600V AC/300V DC, features a time delay blow characteristic and CC class. With nickel terminal finish and 200kA breaking capacity, it is ideal for electric fuse circuit protection in various applications. Measuring 10.3mm x 38.1mm, it can be mounted inline or in a holder for efficient use.
LPJ-175SPI
Eaton Corporation LPJ-175SPI fuse, rated 175A and 600V, features time delay blow characteristic. With dimensions of 41.4mm x 76.2mm, it is suitable for circuit protection in applications requiring a rated breaking capacity of 300kA. This J-class fuse with TAB/BLADE terminals is ideal for inline mounting in electrical systems.
0215002.MXP
Littelfuse 0215002.MXP fuse, rated 2A and 250V, features time lag blow characteristic with trip delay of 0.01s. With dimensions of 5x20mm, it is used for circuit protection in applications requiring a nominal joule integral of 11.68J and max operating temperature of 125°C.
FWP-25A14F
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 700 V; Rated DC Voltage: 700 V; Rated Current: 25 A; Terminal Shape: END CAP;
FNQ-10
The Eaton Corporation FNQ-10 fuse, rated at 10A and 500V, features a time delay blow characteristic. With a compact MIDGET size and CC class, it offers circuit protection with a high breaking capacity of 10000A. Ideal for inline mounting in various applications certified by CE, CSA, and UL standards.
FNQ-3-2/10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: 3.2 A; Terminal Shape: END CAP; Body Length/Diameter: 10.3 mm;
KTK-R-1/2
The Eaton Corporation KTK-R-1/2 fuse, rated at 0.5A and 600V, features fast blow characteristic with a body length of 10.3mm and diameter of 38.1mm. Designed for circuit protection in applications requiring high breaking capacity up to 200kA, it is suitable for use in CE, CSA, and UL compliant systems with inline mounting capability.
ATM-15
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 15 A; Terminal Shape: TAB/BLADE; Dimensions: 10.92mm x 3.81mm x 8.81mm;
KTK-3
KTK-3 fuse by Eaton Corporation is a 600V fast blow electric fuse with a rated current of 3A. It has a compact body size of 10.3mm x 38.1mm and can handle high breaking capacity up to 100000A. This fuse is commonly used for circuit protection in various applications, such as inline or holder mounting in electrical systems.
021501.6MXEP
Littelfuse 021501.6MXEP fuse, rated 1.6A and 250V, features time lag blow characteristic with trip delay of 0.01s. With dimensions of 5x20mm, it is ideal for circuit protection in applications requiring a rated breaking capacity of 1500A at temperatures ranging from -55 to 125°C.
KTK-1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated DC Voltage: 500 V; Rated Current: .5 A; Terminal Shape: END CAP;
DMM-B-44/100-R
The Eaton Corporation DMM-B-44/100-R fuse is rated for 1000V AC/DC with a 0.44A current. Featuring fast blow characteristic and nickel terminal finish, it has a breaking capacity of 10kA. Ideal for electric circuit protection in UL-standard applications, its dimensions are 10mm x 34.9mm for inline mounting.
0452002.MRL
Littelfuse 0452002.MRL NANO fuse with 125V AC/DC, 2A rated current and slow blow characteristic. Ideal for circuit protection in electronics, featuring WRAPAROUND terminals and CSA/CUL/UL standards compliance. Dimensions: 6.1mm x 2.69mm x 2.69mm, operating temp -55 to 125 °C.
ATM-5
Eaton Corporation's ATM-5 fuse, with 5A rated current and 32V rated voltage, features fast blow characteristic. Measuring 10.92mm x 3.81mm x 8.81mm, it is used for electric circuit protection in various applications like inline or holder mounting due to its UL reference standard compliance.
LP-CC-3-1/2
Eaton Corporation LP-CC-3-1/2 fuse, rated 3.5A and 600V AC, features time delay blow characteristic for electric circuit protection. With a rated breaking capacity of 200kA, it is suitable for inline mounting applications in CE, CSA, and UL standard compliant systems.
0437.500WR
Littelfuse 0437.500WR is a fast-blow electric fuse with 0.5A rated current and 63V rated voltage, suitable for circuit protection in various applications. With dimensions of 3.2mm x 1.63mm x 0.82mm, it has a trip time of 5s and nominal joule integral of 0.018J, meeting CSA, CUL, and UL standards.
ANN-50
Eaton Corporation's ANN-50 fuse, with 125V AC and 80V DC voltage ratings, offers a very fast blow characteristic and 2500A breaking capacity. Measuring 81mm x 22.2mm, it features TAB/BLADE terminals for surface mount applications, providing reliable circuit protection with built-in indicator feature.
LPJ-50SP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 50 A; Terminal Shape: END CAP;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
0678L9300-02
Bel Fuse
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 72 V; Rated Current: 30 A; Terminal Shape: WRAPAROUND;
0678L9100-02
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 72 V; Rated Current: 10 A; Terminal Shape: WRAPAROUND;
0678L9250-02
ELECTRIC FUSE; JESD-609 Code: e4; Terminal Finish: Silver (Ag) - with Nickel (Ni) barrier;
0678H9400-02
Bel Fuse 0678H9400-02 is a 40A fuse with 1000J nominal joule integral and 250V rated AC voltage. Ideal for circuit protection in automotive, industrial, or consumer electronics applications due to its AEC-Q200 compliance and high breaking capacity of 100A.
0678L9150-02
Bel Fuse 0678L9150-02 is a 15A fuse with 110J nominal joule integral and 250V AC voltage rating. It has medium blow characteristic, CE/CUL/UL reference standards, and is ideal for electric circuit protection in applications requiring surface mount fuses.
0678-9300-M2
ELECTRIC FUSE; Rated Current: 30 A; Packing Method: TAPE AND REEL; Rated Breaking Capacity: 100 A; Dimensions: 9.8mm x 3.05mm x 3.05mm; Terminal Finish: Matte Tin (Sn);
0678H9300-02
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 30 A; Terminal Shape: WRAPAROUND;
0678H2000-02
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 2 A; Terminal Shape: WRAPAROUND;
0678H9150-02
Bel Fuse 0678H9150-02 is a 15A fuse with 220J nominal joule integral and 250V rated AC voltage. It has trip time of 60s, suitable for electric circuit protection in automotive applications. With AEC-Q200, CUL, CE, UL certifications, it offers reliable performance from -55 to 125 °C operating temperature range.
0678H9200-22
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 20 A; Terminal Shape: WRAPAROUND;
0678H8000-02
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 8 A; Terminal Shape: WRAPAROUND;
0678H9400-22
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 40 A; Terminal Shape: WRAPAROUND;
0678H2500-22
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 2.5 A; Terminal Shape: WRAPAROUND;
0678H9200-02
0678H8000-22
0678H2500-02
0678H1000-22
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 1 A; Terminal Shape: WRAPAROUND;
0678H9250-22
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 25 A; Terminal Shape: WRAPAROUND;
0678H1250-02
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 1.25 A; Terminal Shape: WRAPAROUND;
0678H9350-02
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 35 A; Terminal Shape: WRAPAROUND;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved