Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: .5 A; Terminal Shape: WRAPAROUND;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Fuses 0678H0500-22 attributes and parameters. Explore more Fuses devices from Bel Fuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated DC Voltage:
Rated Voltage:
Body Diameter:
Body Height:
Body Width:
Fuse Size/Group:
Trip Time/Delay:
Additional Features:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
JESD-609 Code:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
0678H0500-22 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.10.00.40
SB
Founded in 1949, Bel designs, manufactures and markets a broad array of products that power, protect and connect electronic circuits. With over 70 years of experience, Bel has reliably demonstrated the ability to succeed in a variety of product areas.
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
2N2222A
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
Bharat Electronics
SBAV99LT1G
Onsemi
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
1N4148WS
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRA340T3G
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
LM317T/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
LM7805CT
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
NE555D
Texas Instruments
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
SS14
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
LL4148
Weitron Technology
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
Sangdest Microelectronics (Nanjing)
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
BAV99
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
ATQR15
Mersen S A
The Mersen S A ATQR15 fuse is a 15A electric fuse with a rated AC voltage of 600V and rated breaking capacity of 200kA. Featuring time delay blow characteristic, it has dimensions of 10.4mm x 38.1mm and terminal shape END CAP. Ideal for circuit protection in applications requiring inline/holder mounting at temperatures up to 80°C.
FNQ-R-3/4
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: .75 A; Terminal Shape: END CAP; Body Length/Diameter: 10.3 mm;
KTK-1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: .5 A; Terminal Shape: END CAP; Manufacturer Series: KTK;
LP-CC-10
Eaton Corporation
LP-CC-10 by Eaton Corp is a 10A time delay electric fuse with 600V AC & 150V DC ratings. Measuring 10x38.1mm, it has a breaking capacity of 200kA. Commonly used in inline/holder setups for circuit protection in various applications.
AMG-100
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 48 V; Rated Current: 100 A; Terminal Shape: TAB/BLADE; Body Width: 15.4 inch;
0218002.HXP
Littelfuse
Littelfuse 0218002.HXP fuse, rated 2A at 250V, features time lag blow characteristic with 0.02s trip delay. Ideal for circuit protection in applications requiring supplemental fuses with 5x20mm size and nickel terminal finish. Compliant with CCC, CE, CSA, IEC, KC, PSE, SEMKO, UL, VDE standards.
0697-0100-01
Bel Fuse
Bel Fuse 0697-0100-01 is a MICRO fuse with 0.1A rated current and 250V AC voltage. With dimensions of 8.35mm x 4mm x 7.7mm, it offers time lag blow characteristic for circuit protection. Ideal for applications requiring electric fuse with through hole mounting feature and matte tin terminal finish.
ATDR4
Mersen S A's ATDR4 fuse, rated 4A and 600V AC/300V DC, features time delay blow characteristic. With dimensions of 10.4mm x 38.1mm and end cap terminal shape, it offers circuit protection with a high breaking capacity of 200kA. Ideal for inline mounting in various applications meeting CSA and UL standards.
0453001.MR
Littelfuse 0453001.MR NANO fuse, rated 1A at 125V AC/DC, with 0.6029J joule integral and 5s trip time. Ideal for circuit protection in electronics due to very fast blow characteristic and compact dimensions of 6.1mm x 2.69mm x 2.69mm. Compliant with CE, CSA, CUL, PSE, TUV, UL standards for various applications.
ERBRD0R50X
Panasonic
The Panasonic ERBRD0R50X fuse is a 0402 size with 0.5A rated current and 35A breaking capacity. It has fast blow characteristic, -40 to 125 °C operating temperature range, and UL/CUL standards. Ideal for electric circuit protection in surface mount applications due to its compact size and high breaking capacity.
3413.0002.24
Schurter Ag
Schurter Ag's 3413.0002.24 fuse is a 3.2x1.6mm surface mount electric fuse with rated current of 0.05A and rated AC voltage of 125V, suitable for circuit protection in applications requiring very fast blow characteristic at temperatures ranging from -55 to 90°C.
213.5
213.5 fuse by Littelfuse is a time lag electric fuse with a rated current of 0.5A and rated AC voltage of 250V. With dimensions of 5.2mm x 20mm, it has a nominal joule integral of 2.9J and can operate b/w -55°C to 125°C. This fuse is commonly used for circuit protection in various applications due to its high breaking capacity of 100A and compliance with standards such as CCC, CE, CSA, IEC, SEMKO, and UL.
FNQ-R-4-1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 4.5 A; Terminal Shape: END CAP; Body Height: 38.1 mm;
0466001.NR
0466001.NR by Littelfuse is a 1206 size fuse with rated current of 1A and fast blow characteristic. It has a nominal joule integral of 0.0423J, rated AC voltage of 63V, and trip time of 0.2s. Ideal for circuit protection in applications requiring surface mount fuses with matte tin over nickel terminal finish.
0242.050UR
Littelfuse 0242.050UR fuse with 0.05A current, 250V AC/DC voltage rating, and 14400s trip time is ideal for electric circuit protection. Featuring a compact size of 3.02mm x 8.4mm, WRAPAROUND terminals, and UL reference standard, it ensures reliable performance in a wide temperature range from -40°C to 125°C. Suitable for surface mount applications requiring a high breaking capacity of 4000A.
LPJ-50SP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 50 A; Terminal Shape: END CAP;
DFJ-40
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 450 V; Rated Current: 40 A; Terminal Shape: END CAP;
JKS-40
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 40 A; Terminal Shape: END CAP; Dimensions: 27mm x 60.3mm;
0437.500WR
Littelfuse 0437.500WR is a fast-blow electric fuse with 0.5A rated current and 63V rated voltage, suitable for circuit protection in various applications. With dimensions of 3.2mm x 1.63mm x 0.82mm, it has a trip time of 5s and nominal joule integral of 0.018J, meeting CSA, CUL, and UL standards.
LP-CC-6-1/4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 150 V; Rated Current: 6.25 A; Terminal Shape: END CAP;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved