Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
AWH26G-0202-T by Assmann Wsw Components is a 26-contact board connector with 0.1" pitch, suitable for commercial applications. It features tin termination finish, brass contacts, and glass-filled polyethylene insulator material. With a dielectric voltage of 500VAC and operating temperature range from -40 to 105°C, it offers reliable performance in various electronic systems.
Median Price
$0.992
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
RS (Exports)
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Nova Conductors
$0.599
Vyrian
VNN
LIBRA Elektronik GmbH
Argo Parts USA
$0.581
Continental Prestige Electronics
$0.587
AZTECH Wire
$1.640
$1.580
$1.540
$1.510
Perfect Parts
Netroflash
$0.569
$0.557
Close contact pitch allows for high density connections on the PCB, making it suitable for applications where space is limited.
High dielectric voltage ensures reliable insulation and safety for the electronic components connected.
Glass filled polyethylene offers excellent durability and heat resistance, ensuring a long-lasting and reliable connection.
With a high number of contacts, this connector allows for multiple connections within the same component, increasing functionality and versatility.
With a high signal current rating, this connector can support the transfer of substantial electrical currents, making it suitable for various applications.
Headers & Edge Type Connectors AWH26G-0202-T attributes and parameters. Explore more Headers & Edge Type Connectors devices from Assmann Wsw Components
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
Dielectric Withstanding Voltage (V):
Insulator Color:
Insulator Material:
JESD-609 Code:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mounting Option-1:
Mounting Option-2:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
AWH26G-0202-T Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
The ASSMANN WSW Group is well known as a global system provider for standard and customer-tailored connectors, cable assemblies, heat sinks and assembly services. The ASSMANN WSW Group has more than 50 years of experience in the electromechanical and the thermal management market. The products are available internationally through a global distribution network. The products of the ASSMANN WSW Group are used in both the industrial and automotive sectors. The BCS Group GmbH, as 100% owner of the ASSMANN WSW Group, has mainly produced cable assemblies and lighting technology for the automotive industry since 1993.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
Panjit International
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RQ-REEL
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
Onsemi
NE555D
STMicroelectronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
1N4148WS
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
General Transistor
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Rochester Electronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
Synsemi
1N4148WT
Taitron Components
2N7002
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SMBJ18CA
General Instrument
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EHR-3
J S T Mfg
EHR-3 by J S T Mfg is a 3-contact BOARD CONNECTOR with 0.098" pitch, 0.15"x.28" body size, and UL 94V-0 flammability rating. It is used for cable mounting with female contacts terminated via crimping, ideal for electronic applications requiring compact and reliable connections.
DF11-10DP-2DS(24)
Hirose Electric
DF11-10DP-2DS(24) by Hirose Electric is a 10-contact board connector with 0.079" pitch, suitable for PCB applications. It features a dielectric voltage of 650VAC, insulation resistance of 1Gohm, and operates b/w -30 to 85°C. Ideal for commercial use, it offers durability of 30 cycles and solder termination type.
FTSH-110-01-L-DV-K
Samtec
The Samtec FTSH-110-01-L-DV-K is a 2-row board connector with a mating contact pitch of 0.05 inches. It has a body length of 0.5 inches and can operate at temperatures ranging from -55 to 125°C. This connector is commonly used in commercial applications requiring reliable surface mount connections.
DM3CS-SF
The Hirose Electric DM3CS-SF is a card edge connector with 0.043" mating contact pitch, 500VAC dielectric voltage, and 1000000000 ohm insulation resistance. Ideal for board mounting applications in commercial settings, featuring male compression contacts and a surface mount termination type.
1-640456-4
TE Connectivity
TE Connectivity 1-640456-4 is a board connector with 14 contacts, 0.1" pitch, and tin finish. It has a body size of 1.4"x0.425"x0.225" and operates b/w -55°C to 105°C. Ideal for commercial applications requiring a polarized, rectangular contact pattern with a rated current of 5A.
PAP-02V-S
PAP-02V-S by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 3A signal current rating, and 800VAC dielectric voltage. It features POLYAMIDE66 insulation material and operates b/w -25 to 85°C. Ideal for cable mounting applications requiring a reliable female SQ PIN-SKT contact style connector.
51021-0900
Molex
The Molex 51021-0900 is a board connector with 9 contacts, 0.049" pitch, and 0.512" body length. It has a female contact gender, crimp termination type, and operates b/w -40°C to 85°C. Ideal for commercial applications requiring reliable cable mounting with locking option.
MTSW-102-07-G-S-240
Samtec's MTSW-102-07-G-S-240 is a board stacking connector with 0.1" pitch, gold-plated contacts, and glass-filled polyester insulator. Ideal for commercial applications, it features 2.54mm terminal pitch, solder termination, and male contact gender for reliable PCB connections.
61300811121
Wuerth Elektronik & Kg
61300811121 by Wurth Elektronik is a BOARD CONNECTOR with 8 contacts, rated at 3A. Featuring a mating contact pitch of 0.1", it has an insulation resistance of 1Gohm and can withstand up to 500VAC. Ideal for commercial applications, this connector operates b/w -40°C to 125°C on PCBs with a rectangular contact pattern.
66506-354
Amphenol Communications Solutions
Amphenol's 66506-354 is a 40-contact, 2-row board connector with a terminal pitch of 2.54mm. Featuring UL94V-0 flammability rating, it is ideal for applications requiring male solder contacts in straight mounting style.
7-215079-8
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Mating Contact Row Spacing (inch): 0.059; PCB Contact Row Spacing (mm): 2.54;
640456-3
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: NO;
53261-0871
The Molex 53261-0871 is a board connector with 0.049" mating contact pitch, 100M ohm insulation resistance, and 250VAC dielectric voltage. Ideal for commercial applications, it features a right-angle mounting style and surface mount termination type for durability in temperatures ranging from -40 to 105°C.
SM02B-BHSS-1-TB(LF)(SN)
SM02B-BHSS-1-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.138" pitch, 0.295" length, and 0.126" width. Ideal for SURFACE MOUNT applications, it features FEMALE contact gender, BRASS material, and POLYAMIDE insulator.
DF40HC(3.0)-100DS-0.4V(58)
DF40HC(3.0)-100DS-0.4V(58) by Hirose Electric is a 2-row stacking connector with 100 contacts, 0.016" pitch, and 100VAC voltage rating. Ideal for board mounting applications in commercial settings due to its durability of 30 cycles and phosphor bronze contact material.
78171-0002
Molex 78171-0002 is a board connector with 0.047" mating contact pitch, suitable for commercial applications. Featuring gold over nickel termination finish, it offers high durability with 10 cycles and operates b/w -25 to 85°C temperature range. The connector has a total of 2 contacts and is UL certified with a flammability rating of 94V-0.
B5B-EH-A(LF)(SN)
B5B-EH-A(LF)(SN) by J S T Mfg is a 5-contact BOARD CONNECTOR with 0.098" mating contact pitch, 0.15" body width, and 0.236" body depth. It features Tin (Sn) reflowed termination for soldering applications. Ideal for use in electronics requiring a compact straight male connector with UL 94V-0 flammability rating.
1065
Keystone Electronics
PCB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Body Width: .3 inch; Contact Pattern: RECTANGULAR;
1-281739-0
TE Connectivity 1-281739-0 is a POLYETHYLENE insulator BOARD CONNECTOR with 20 contacts, rated at 3A. It has a polarization key and operates b/w -40 to 100 °C. The connector features tin termination finish, UL94V-0 flammability rating, and is suitable for applications requiring high insulation resistance.
HLW12S-2C7LF
HLW12S-2C7LF by Amphenol is a 12-contact FFC/FPC connector with 0.039" mating pitch and tin finish. It is UL 94V-0 rated, suitable for board mounting with solder termination. Ideal for applications requiring straight female connectors in headers & edge type setups.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AWH20G-0222-T
Assmann Wsw Components
AWH20G-0222-T by Assmann Wsw Components is a 20-contact male board connector with 0.1" pitch, suitable for commercial applications. Featuring brass contacts with tin finish, it offers insulation resistance of 1 Gohm and can handle up to 3A signal current. With a temperature range from -40°C to 105°C, this connector is UL certified and has a dielectric strength of 1000VAC.
AWH26G-0232-T
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; No. of Connectors: ONE; Plating Thickness (inch): FLASH;
AWH20A-0202-T
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE; Body Width: .323 inch;
AWH20G-0202-T
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE; Minimum Operating Temperature: -40 Cel;
AWH26A-0202-T
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; No. of Connectors: ONE; Reference Standard: UL;
AWH20G-0232-T
AWH26A-0232-T
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; No. of Connectors: ONE; Mounting Type: BOARD;
AWH26G-0222-T
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; No. of Connectors: ONE; Total No. of Contacts: 26;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved