Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Aptiv 12147473 CONTACT is a CRIMP terminal made of COPPER ALLOY for FIAT T3 cables. It has a min cable entry of 0.106" and max cable entry of 0.118". Ideal for automotive assembly applications.
Median Price
$0.762
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Arrow
1+ parts
$0.986
100+ parts
$0.537
1k+ parts
$0.460
10k+ parts
$0.389
Mouser Electronics
$1.050
$0.570
$0.502
$0.426
TTI
-
$0.293
TTI Europe
Verical
Nova Conductors
$0.558
Vyrian
VNN
Continental Prestige Electronics
$0.547
Argo Parts USA
$0.541
Aztec Data Supply Inc.
$6.864
Perfect Parts
EMSNET (Excess)
GreenTree Electronics
Authorized Procurement Solutions
Netroflash
$0.530
$0.519
Crimp terminals provide a reliable and secure connection, ensuring the stability of the assembly.
Accommodates a variety of cable sizes, allowing for flexibility in applications.
The use of specific contacts ensures compatibility with FIAT T3 cable types for seamless integration.
Designed specifically for FIAT T3 cable types, ensuring optimal performance and reliability.
Provides a secure fit for a wide range of cable sizes, enhancing versatility in assembly applications.
Copper alloy offers excellent conductivity and durability, ensuring long-lasting performance of the product.
Assembly Products 12147473 attributes and parameters. Explore more Assembly Products devices from Aptiv
Additional Features:
Assembly Item Name:
Maximum Cable Entry:
Minimum Cable Entry:
Cable Types:
Connector Accessory Type:
DIN Conformity:
IEC Conformity:
MIL Conformity:
Material:
Terminal Type:
12147473 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
Aptiv's signal and power solutions segment supplies components and systems that make up a vehicle's electrical system backbone, including wiring assemblies and harnesses, connectors, electrical centers, and hybrid electrical systems. The advanced safety and user experience segment provides body controls, infotainment and connectivity systems, passive and active safety electronics, advanced driver-assist technologies, and displays, as well as the development of software for these systems. Aptiv's largest customer is General Motors at roughly 12% of 2021 revenue, including sales to GM's Shanghai joint venture, followed by Stellantis at 11%, and Volkswagen at 9%. North America and Europe represented approximately 38% and 33% of total 2019 revenue, respectively.
2N7002
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
BAV99
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358M
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148
American Power Devices
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
Loras Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Continental Device India
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
TM4C1294NCPDTI3
Texas Instruments
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
Boca Semiconductor
Multicomp Pro
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
3030527
Phoenix Contact
CONNECTOR ACCESSORY;
SXH-002T-P0.6
J S T Mfg
SXH-002T-P0.6 by J S T Mfg is a CRIMP terminal with 30-26 AWG wire size range, rated for 3A current at 250V AC/DC. It has approvals from UL and features a straight mounting style, suitable for applications requiring female contact gender and low contact resistance.
DF3-2428SCC
Hirose Electric
DF3-2428SCC by Hirose Electric is a CRIMP FEMALE CONTACT with BELLOWED design made of PHOSPHOR BRONZE. It has a 0.108" terminal length and STRAIGHT mounting style. Ideal for applications requiring reliable electrical connections in assembly products.
39-00-0223
Molex
Molex 39-00-0223 contact is designed for 5559, 30068, and 42475 series housings. It features a crimp terminal type with a square pin-socket contact design. Made of phosphor bronze, it supports up to 16 AWG wire size and has a 0.122" max cable entry.
293726-1
TE Connectivity
08-50-0031
Molex 08-50-0031 contact features crimp terminal type, chain contact design, and brass material. Ideal for applications requiring female contact gender, straight mounting style, and compression contact style. Supports wire sizes from 30 AWG to 22 AWG with a finish thickness of 120.
M80-0130005
Harwin Plc
The Harwin PLC M80-0130005 is a CRIMP terminal with operating temperatures ranging from -55°C to 125°C. It features a rated current of 3A, suitable for wire sizes b/w 28-24 AWG. This FEMALE contact with ROUND PIN-SOCKET design in BRASS material is ideal for SIGNAL applications requiring a STRAIGHT mounting style and 0.043" cable entry.
39-00-0022
Molex 39-00-0022 CONTACT features CRIMP terminals for 24-18 AWG wires, with 0.051-0.126 inch cable entry. Made of PHOSPHOR BRONZE, it has a 0.197" length and SQUARE PIN-SOCKET style. Ideal for FEMALE contacts in Assembly Products applications.
100132-1
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; Maximum Operating Temperature: 130 Cel; Minimum Operating Temperature: -40 Cel; Maximum Wire Size: 0 AWG;
AW6P
Amphenol
50-29-1900
The Molex 50-29-1900 is a brass contact with compression style, suitable for 7880 Series Housing. It supports wire sizes from 30 AWG to 24 AWG and has a 0.06 inch cable entry. The terminal length is 0.186 inch, making it ideal for straight mounting applications.
12048159
Delphi Connection Systems
CONNECTOR ACCESSORY; Contact Gender: MALE; MIL Conformity: NO; Assembly Item Name: CONTACT; Mounting Style: STRAIGHT; Contact Style: BLADE PIN-SOCKET;
5226
Keystone Electronics
350536-1
TE Connectivity's 350536-1 is a UNIVERSAL MATE-N-LOK PLUG AND CAP HOUSING with CSA, UL, VDE approvals. It features CRIMP terminals for 14-20 AWG wires, rated at 600V and 19A. Constructed with STRANDED wire support, it has a temperature range of -55 to 105 °C and is ideal for POWER applications.
AW8S
209-120
Wago
TERMINAL BLOCK ACCESSORY; Assembly Item Name: MOUNTING ITEM; IEC Conformity: NO; DIN Conformity: NO; MIL Conformity: NO;
15-04-5104
CONNECTOR ACCESSORY; MIL Conformity: NO; DIN Conformity: NO; IEC Conformity: NO;
5-968221-1
TE Connectivity 5-968221-1 is a CRIMP terminal with stamped contact design. It supports wire gauge 18 AWG, rated for 7.5A current. Ideal for applications requiring female contact gender and operating temperatures from -40 to 120°C.
DF13-3032SCF
DF13-3032SCF by Hirose Electric is a CRIMP terminal with POLYAMIDE insulator. Rated for 150V AC, it has a contact resistance of 30 mohm and can handle up to 1A current. Ideal for applications requiring FEMALE contacts, such as in UL-approved assemblies operating b/w -35°C to 85°C.
45750-1112
45750-1112 by Molex is a crimp contact with copper alloy material. It supports wire sizes from 20 AWG to 18 AWG and has a finish thickness of 100. Ideal for applications with 5557, 30067, 43760, 44516, and 42474 series housings.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
12147473
CONNECTOR ACCESSORY; Cable Types: FIAT T3; DIN Conformity: NO; Additional Features: CONTACT FINISH: TIN; Material: COPPER ALLOY; Maximum Cable Entry: .118 inch;
1-2149490-5
TE Connectivity's 1-2149490-5 is a compliant fit terminal with a max operating temperature of 105°C and min operating temperature of -55°C. It is designed for signal applications and made from nickel silver alloy. Suitable for use in assembly products.
1-2141261-1
Assembly Items; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG;
1-2141263-4
Assembly Items;
1-2141263-3
Assembly Items; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0;
12147300
CONNECTOR ACCESSORY; Material: COPPER ALLOY; Terminal Type: CRIMP; Assembly Item Name: CONTACT; IEC Conformity: NO; Additional Features: CONTACT FINISH: TIN;
12147303
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; Additional Features: CONTACT FINISH: TIN; Terminal Type: CRIMP; DIN Conformity: NO; MIL Conformity: NO;
12147400
CONNECTOR ACCESSORY; MIL Conformity: NO; DIN Conformity: NO; Cable Types: FLU142Y; Terminal Type: CRIMP; Minimum Cable Entry: .051 inch;
12147474
CONNECTOR ACCESSORY; Maximum Cable Entry: .169 inch; DIN Conformity: NO; Minimum Cable Entry: .134 inch; Additional Features: CONTACT FINISH: TIN; MIL Conformity: NO;
12147596
CONNECTOR ACCESSORY; Maximum Cable Entry: .118 inch; Terminal Type: CRIMP; IEC Conformity: NO; Additional Features: CONTACT FINISH: TIN; DIN Conformity: NO;
12147656
CONNECTOR ACCESSORY; MIL Conformity: NO; IEC Conformity: NO; Terminal Type: CRIMP; Cable Types: FLRY-B; Maximum Cable Entry: .118 inch;
Aptiv
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: NO; IEC Conformity: NO; DIN Conformity: NO; Additional Features: CONTACT FINISH: TIN;
CONNECTOR ACCESSORY; Material: COPPER ALLOY; Minimum Cable Entry: .051 inch; Maximum Cable Entry: .063 inch; DIN Conformity: NO; MIL Conformity: NO;
CONNECTOR ACCESSORY; MIL Conformity: NO; IEC Conformity: NO; Assembly Item Name: CONTACT; DIN Conformity: NO; Terminal Type: CRIMP;
12147301
CONNECTOR ACCESSORY; DIN Conformity: NO; Minimum Cable Entry: .075 inch; Material: COPPER ALLOY; Additional Features: CONTACT FINISH: TIN; IEC Conformity: NO;
12147304
CONNECTOR ACCESSORY; MIL Conformity: NO; Mounting Style: STRAIGHT; Minimum Cable Entry: .106 inch; DIN Conformity: NO; Additional Features: CONTACT FINISH: TIN;
CONNECTOR ACCESSORY; DIN Conformity: NO; IEC Conformity: NO; Cable Types: FLRY-B; Additional Features: CONTACT FINISH: TIN; MIL Conformity: NO;
12147597
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; DIN Conformity: NO; Terminal Type: CRIMP; Minimum Cable Entry: .134 inch; IEC Conformity: NO;
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; Cable Types: FLRY-B; DIN Conformity: NO; MIL Conformity: NO; IEC Conformity: NO;
CONNECTOR ACCESSORY; Minimum Cable Entry: .087 inch; IEC Conformity: NO; Additional Features: CONTACT FINISH: TIN; Assembly Item Name: CONTACT; MIL Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved