Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Aptiv 12084586 CONTACT features CRIMP terminal type for FLRY-B cables. Made of BRASS, it allows cable entry from 0.126" to 0.146". Ideal for automotive and industrial assembly applications.
Median Price
$0.145
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
TTI
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Arrow
Verical
Chip1Stop
$0.091
Power & Signal
$0.126
Mouser Electronics
$0.150
Master Electronics
$0.153
TTI Europe
CustomConnectorKits
$0.110
Component Electronics Inc.
$0.580
$0.430
$0.380
Vyrian
IBS Electronics
$0.214
A2Z Electronics, Inc.
Elcom Components
Q Components
VNN
Bristol Electronics
Nova Conductors
Perfect Parts
Authorized Procurement Solutions
Resion (Excess)
Aranea Global
Crimped terminals provide a secure and reliable connection, ensuring the contact stays in place during use.
Accommodates a wide range of cable sizes, allowing for flexibility in application and installation.
Contacts are essential components for electrical connections, making this product a key element in assembly processes.
Suitable for FLRY-B cables, which are commonly used in automotive applications due to their resistance to heat and abrasion.
Allows for larger cable sizes to be accommodated, giving more versatility in usage scenarios.
Brass is a durable and conductive material, making it ideal for electrical contacts that require a strong and reliable connection.
Assembly Products 12084586 attributes and parameters. Explore more Assembly Products devices from Aptiv
Additional Features:
Assembly Item Name:
Maximum Cable Entry:
Minimum Cable Entry:
Cable Types:
Connector Accessory Type:
DIN Conformity:
IEC Conformity:
MIL Conformity:
Material:
Terminal Type:
12084586 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
NSN
5940-01-419-5877, 5940014195877
NIIN
014195877
Aptiv's signal and power solutions segment supplies components and systems that make up a vehicle's electrical system backbone, including wiring assemblies and harnesses, connectors, electrical centers, and hybrid electrical systems. The advanced safety and user experience segment provides body controls, infotainment and connectivity systems, passive and active safety electronics, advanced driver-assist technologies, and displays, as well as the development of software for these systems. Aptiv's largest customer is General Motors at roughly 12% of 2021 revenue, including sales to GM's Shanghai joint venture, followed by Stellantis at 11%, and Volkswagen at 9%. North America and Europe represented approximately 38% and 33% of total 2019 revenue, respectively.
1N4148
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99WT1G
Onsemi
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
LL4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
2N2222A
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
Excel (Suzhou) Semiconductor
BAV99
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
American Power Devices
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
Shenzhen Yixinsemi Electronics
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
WM-4P
TE Connectivity
TE Connectivity's WM-4P is a power and signal assembly item designed for DTM SERIES. With a max operating temp of 125°C and min of -55°C, it supports wires up to 0 AWG. Made of PBT, it's ideal for various applications requiring reliable connections in extreme temperature conditions.
2-2154857-1
TE Connectivity's 2-2154857-1 is a POWER assembly product with a rated voltage of 250V and max operating temperature of 105°C. It can handle wire sizes up to 0 AWG and has a rated current of 4A. This versatile copper alloy component is commonly used in applications requiring high power transmission.
1-66109-7
TE Connectivity 1-66109-7, a crimp terminal for CPC/G and M series connectors, features brass material, 24-26 AWG wire gauge compatibility, and 13A rated current. Ideal for power and signal applications with CSA/UL approvals and operating temperatures from -55 to 90°C.
7-745129-9
CONNECTOR ACCESSORY; Shielding: YES; Maximum Wire Size: 0 AWG; Assembly Item Name: FERRULE-STEPPED; Material: BRASS; Wire Gauge (AWG): 0;
39-00-0181
Molex
Molex 39-00-0181 is a power contact with square pin-socket design. It supports wire sizes from 24 to 18 AWG and has a finish thickness of 30. Ideal for use in housings like 5557, 30067, 44516, or 42474 with 0.051" to 0.122" cable entry.
DTP04-4P-P059
TE Connectivity's DTP04-4P-P059 is a male power and signal connector with 25A rated current, 200V DC voltage, and -55 to 125°C operating temperature range. Ideal for assembly products requiring high voltage and current capabilities in various applications.
M39029/1-102
TE Connectivity's M39029/1-102 contact is MIL conformant with operating temperatures from -65 to 200°C. Featuring a wire gauge of 14 AWG, it has a cross-section area of 2.5 mm² and is made of brass. This male contact is designed for straight mounting applications.
3030161
Phoenix Contact
TERMINAL BLOCK ACCESSORY; Assembly Item Name: PLUG-IN BRIDGE; Material: COPPER; Approvals (V): EAC; UL; IEC Conformity: NO; DIN Conformity: NO;
DF11-22SC
Hirose Electric
CONNECTOR ACCESSORY;
08-50-0031
Molex 08-50-0031 contact features crimp terminal type, chain contact design, and brass material. Ideal for applications requiring female contact gender, straight mounting style, and compression contact style. Supports wire sizes from 30 AWG to 22 AWG with a finish thickness of 120.
16-02-0107
030-1952-000
Itt Cannon
The ITT Cannon 030-1952-000 is a male contact assembly product with a crimp terminal type. It has a max operating temperature of 105°C and is rated for AC voltage up to 1000V. This contact is made of copper alloy and is commonly used in applications requiring a round pin-socket contact design.
N020606601002
Amphenol
3200548
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; Material: COPPER ALLOY; Approvals (V): CSA; UL; IEC Conformity: NO; Maximum Operating Temperature: 105 Cel;
205089-1
TE Connectivity's 205089-1 CONTACT is a male signal round pin-socket designed for AMPLIMITE usage. It features a copper alloy construction, crimp terminal type, and can handle wire sizes from 24 to 20 AWG with a rated current of 7.5 A. Operating temperatures range from -55 to 125°C, making it suitable for various assembly applications.
43030-0021
The Molex 43030-0021 is a female crimp receptacle contact with a terminal length of 0.138". It supports wire sizes from 24 AWG to 20 AWG and has a max cable entry of 0.73". Ideal for straight mounting applications, this contact is made of phosphor bronze and features a round pin socket design.
1-968857-1
TE Connectivity 1-968857-1 is a CRIMP terminal with stamped contact design. It supports wire gauge up to 13 AWG and rated current of 22 A. Ideal for applications requiring female contact gender, with operating temperatures ranging from -40 to 130 °C.
HDC34-24
CONNECTOR ACCESSORY; Maximum Operating Temperature: 125 Cel; Contact Gender: MALE; Minimum Operating Temperature: -55 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG;
1SNK150051R0000
Abb
TERMINAL BLOCK ACCESSORY; Minimum Operating Temperature: -55 Cel; Insulator Material: POLYAMIDE; Maximum Operating Temperature: 110 Cel; Maximum Wire Size: 0 AWG; Mounting Style: RIGHT ANGLE;
1-2308340-5
TE Connectivity 1-2308340-5 is an Assembly Product with shielding, operating from -40 to 90°C. Made of ZINC ALLOY, it supports wire sizes up to 0 AWG. Mounting options include SCREW and #4-40 UNC, ideal for various industrial applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
12089188
Aptiv
Aptiv 12089188 CONTACT features CRIMP terminal type for FLRY-B cables. Made of COPPER ALLOY, it allows cable entry from 0.067 to 0.075 inch. Ideal for assembly products requiring precise crimping on automotive wiring harnesses.
12089040
Aptiv 12089040 CONTACT is a CRIMP terminal made of BRASS for FLRY-B cables. It has 0.055-0.075 inch cable entry, suitable for assembly products. Ideal for automotive wiring applications due to its precise crimping and durable material.
12089290
Aptiv's 12089290 CONTACT features CRIMP terminal type for DT3LH cables. Made of COPPER ALLOY, it supports cable entries from 0.051" to 0.063". Ideal for assembly products requiring precise crimping on specified cable types.
12084200
Aptiv 12084200 CONTACT for FLRY-B cables, CRIMP terminal type, made of BRONZE. Suitable for cables with 0.055-0.063 inch entry. Ideal for Assembly Products applications.
12084912
CONNECTOR ACCESSORY; Rated Current: 7 A; Contact Style: ROUND PIN-SOCKET; Contact Gender: FEMALE; DIN Conformity: NO; Maximum Cable Entry: .08 inch;
12089307
CONNECTOR ACCESSORY; Additional Features: CONTACT FINISH: TIN; MIL Conformity: NO; IEC Conformity: NO; Terminal Type: CRIMP; Assembly Item Name: CONTACT;
12084913
CONNECTOR ACCESSORY; Rated Current: 7 A; DIN Conformity: NO; MIL Conformity: NO; Mounting Style: STRAIGHT; Terminal Length: .379 inch;
1208018
TERMINAL BLOCK ACCESSORY; Manufacturer Series: 1208018;
1208131
TERMINAL BLOCK ACCESSORY;
1208600000
Weidmueller & Kg
1208869
1208131/374.52
TERMINAL BLOCK ACCESSORY; Approvals (V): EN; IEC; Material: STEEL; DIN Conformity: NO; MIL Conformity: NO; IEC Conformity: NO;
1208872
1208160
1208092
1208131/175
TERMINAL BLOCK ACCESSORY; Assembly Item Name: MOUNTING ITEM; Approvals (V): EN; IEC; Material: STEEL; MIL Conformity: NO; IEC Conformity: NO;
1208131/194.50
TERMINAL BLOCK ACCESSORY; Material: STEEL; IEC Conformity: NO; MIL Conformity: NO; Assembly Item Name: MOUNTING ITEM; DIN Conformity: NO;
1208128
1208131/284.00
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; Material: STEEL; Approvals (V): EN; IEC; Assembly Item Name: MOUNTING ITEM; DIN Conformity: NO;
12084595
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; Material: COPPER ALLOY; Additional Features: CONTACT FINISH: TIN; IEC Conformity: NO; Cable Types: FLRY-B;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved