Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Analog Devices' SMP10FY is a Sample & Hold IC with 14 terminals, ceramic package, and rectangular shape. It operates at ±15V power supplies, has a max droop rate of 0.13 V/s, and uses bipolar technology. Ideal for commercial applications requiring fast acquisition time of 5 us in sample-and-hold circuits.
Median Price
$9.920
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$9.470
1k+ parts
$8.470
10k+ parts
$7.980
DigiKey
$10.370
Digiode
$10.022
Vyrian
$10.550
American Microsemiconductor Inc.
$19.610
Bristol Electronics
ACDS - Activité Composants Distribution Service
J & M Industries LLC
Parana Technologies
$0.604
$0.561
IDEA Electronic Components Group
$0.649
$0.617
DigiPath Technology Company
$1.012
$0.972
Semicontronic
$8.970
$8.746
$8.701
Corphita
$9.495
Perfect Parts
ChipTracer
Kepictronics
The ceramic, glass-sealed package provides durability and protection, ensuring the product's longevity and reliability.
Low droop rate ensures accurate and stable voltage holding, crucial for precise sampling and holding in various applications.
The nominal supply voltage of 15V is suitable for a wide range of applications, providing flexibility and compatibility.
With 14 terminals, this product offers versatile connectivity options for various circuit configurations and systems.
The high maximum operating temperature of 70°C ensures the product can function reliably in demanding environments.
Sample & Hold ICs SMP10FY attributes and parameters. Explore more Sample & Hold ICs devices from Analog Devices
Amplifier Type:
Technology:
Power Supply Voltage Ratings:
Total Functions:
Sub-Category:
Sampling Mode:
Nominal Acquisition Time:
Nominal Supply Voltage:
Maximum Supply Voltage:
Maximum Negative Supply Voltage:
Minimum Supply Voltage:
Lowest Operating Temperature:
Maximum Operating Temperature:
Minimum Analog Input Voltage:
Maximum Analog Input Voltage:
Maximum Droop Rate:
Length:
Width:
Maximum Seated Height:
Total Terminals:
Terminal Pitch:
Terminal Position:
Terminal Form:
Terminal Finish:
Package Body Material:
Surface Mount:
Temperature Grade:
Qualified:
JESD-30 Code:
JESD-609 Code:
Package Code:
Package Shape:
Package Style (Meter):
Package Equivalence Code:
SMP10FY Amplifiers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
NSN
5962-01-246-7778, 5962012467778
NIIN
012467778
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
SMBJ18CA
General Instrument
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Vishay Intertechnology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
LM358N
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N2222A
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
CRCW06030000Z0EAHP
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
Onsemi
Bytesonic Electronics
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
JM38510/12501BG
Texas Instruments
JM38510/12501BG by Texas Instruments is a military-grade Sample & Hold IC with 8 terminals, Vsup of ±15V, and operating temp range of -55 to 125°C. It features a cylindrical package, bipolar technology, and 20us acquisition time. Ideal for applications requiring precise analog signal sampling in harsh environments.
OPA615ID
OPA615ID by Texas Instruments is a Sample & Hold IC with Vsup of 5V, operating temp range -40 to 85°C, and max analog input voltage of ±3V. Ideal for industrial applications requiring bipolar technology, it features dual terminals in a small outline package.
TDA1535B
NXP Semiconductors
SAMPLE AND HOLD CIRCUIT; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
AD9100SD/883B
Analog Devices
AD9100SD/883B by Analog Devices is a military-grade Sample & Hold IC with 28 terminals. It operates at temperatures from -55 to 125 °C and has a max droop rate of 6000 V/s. Ideal for applications requiring fast acquisition times and precise sample-and-hold circuit performance.
LF198AH
LF198AH by Texas Instruments is a Sample & Hold IC with 8 terminals, operating at -55 to 125 °C. It has a supply voltage of +-15V, acquisition time of 20us, and can handle analog input voltages up to 11.5V. Ideal for military-grade applications requiring fast sampling and holding capabilities in cylindrical package style.
LF298M
LF298M by Texas Instruments is a Sample & Hold IC with a 15V nominal voltage, 25us max acquisition time, and 5.5mA max supply current. It is used in applications requiring fast and accurate analog signal sampling for precise data acquisition systems.
MAX5166MCCM+
SAMPLE AND HOLD CIRCUIT; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;
ADSHC-85ET
Analog Devices ADSHC-85ET is a military-grade Sample & Hold IC with bipolar technology. It features 14 terminals in an in-line rectangular package, operating from -55°C to 125°C. Ideal for applications requiring precise signal sampling and holding capabilities.
TL1591CP
TL1591CP by Texas Instruments is a Sample & Hold IC with a max droop rate of 100 V/s and nominal voltage of 5V. It features an amplifier type of SAMPLE AND HOLD CIRCUIT, making it ideal for applications requiring fast acquisition times (0.031 us) in commercial extended temperature environments.
AD585SE/883B
AD585SE/883B by Analog Devices is a MIL-STD-883 compliant Sample & Hold IC with 20 terminals, operating at -55 to 125 °C. It features a max droop rate of 1 V/s, acquisition time of 5 us, and amplifier type as SAMPLE AND HOLD CIRCUIT. Ideal for military applications requiring precise voltage holding capabilities.
1410
Dymec
SAMPLE AND HOLD CIRCUIT; Temperature Grade: COMMERCIAL; No. of Terminals: 14; Nominal Negative Supply Voltage (Vsup): -15 V; Nominal Supply Voltage / Vsup (V): 15; Qualification: Not Qualified;
HS1B-2420RH/PROTO
Renesas Electronics
SAMPLE AND HOLD CIRCUIT; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
MAX5166LCCM+
AD648JQ
AD648JQ by Analog Devices is a Sample & Hold IC with 4 functions, BICMOS technology, and 1us acquisition time. It operates b/w -15V to +15V, ideal for sample and hold circuits in commercial applications requiring fast response times. Package style is in-line with ceramic body material.
LF398AH
LF398AH by Texas Instruments is a Sample & Hold IC with 8 terminals and a supply voltage of +-15V. It operates in commercial temperature range, with acquisition time of 20us and max analog input voltage of 11.5V. Ideal for sample and hold circuits in various electronic applications.
HTC-0500AM
Analog Devices' HTC-0500AM is a Sample & Hold IC with 14 terminals in RECTANGULAR METAL package. It features BIPOLAR technology, Tin/Lead finish, and 2.54mm terminal pitch. Ideal for applications requiring SAMPLE AND HOLD CIRCUIT amplification in various electronic systems.
SMP08FSZ
Analog Devices' SMP08FSZ is a Sample & Hold IC with 8 functions, CMOS technology, and 5V nominal voltage. It features a max droop rate of 0.02 V/s and operates in industrial temperature grades. Ideal for applications requiring precise analog signal acquisition within the -40 to 85 °C range.
HA1-2420/883
Intersil
HA1-2420/883 by Intersil is a MILITARY-grade Sample & Hold IC with 14 terminals. It operates at -55 to 125 °C, with +-15V power supplies and 10V max analog input voltage. Ideal for fast acquisition time applications in harsh environments.
MAX5165MCCM+T
HMC1061LC5TR
Analog Devices' HMC1061LC5TR is a ceramic Sample & Hold IC with 32 terminals, operating at -40 to 85°C. It features a max droop rate of 400000 V/s, nominal voltage of 2V, and max analog input voltage of ±1V. Ideal for industrial applications requiring fast acquisition times and precise sample-and-hold circuitry.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
SMP11BIFY
SAMPLE AND HOLD CIRCUIT; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
SMP10NBC
SAMPLE AND HOLD CIRCUIT; Temperature Grade: OTHER; Maximum Operating Temperature: 25 Cel; No. of Functions: 1; Package Equivalence Code: DIE OR CHIP; Minimum Operating Temperature: 25 Cel;
SMP10BY
SMP11AY883C
SMP11-803Y
SMP10GBC
SAMPLE AND HOLD CIRCUIT; Temperature Grade: OTHER; Power Supplies (V): +-15; Qualification: Not Qualified; Screening Level: MIL-STD-883 Class B (Modified); Nominal Supply Voltage / Vsup (V): 15;
SMP11BIGY
SMP10AY/883
SMP110803Y
SMP10EY
SMP11AY/883
SMP11-813Y
SAMPLE AND HOLD CIRCUIT; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Shape: RECTANGULAR; Terminal Position: DUAL; Package Style (Meter): IN-LINE;
SMP10G
SAMPLE AND HOLD CIRCUIT; Terminal Form: NO LEAD; No. of Terminals: 7; Package Code: DIE; Package Shape: RECTANGULAR; Nominal Supply Voltage / Vsup (V): 15;
SMP11BIEY
SMP10BIFY
SMP10N
SAMPLE AND HOLD CIRCUIT; Terminal Form: NO LEAD; No. of Terminals: 7; Package Code: DIE; Package Shape: RECTANGULAR; Terminal Finish: TIN LEAD;
SMP10AY
SMP10BIEY
SMP11AY
Precision Monolithics
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved