Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Analog Devices' OP183GS-REEL7 is an Operational Amplifier with 1250uV Max Input Offset Voltage, 86dB Nominal CMRR, and 5V/us Min Slew Rate. Ideal for industrial applications requiring high voltage gain and frequency compensation in a compact small outline package.
Median Price
$2.370
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$2.190
1k+ parts
$1.960
10k+ parts
$1.850
DigiKey
$2.550
Digiode
$2.328
Vyrian
Semicontronic
$2.080
$2.028
$2.018
Corphita
$2.205
Vigor
$2.350
Component Stockers USA
$2.500
$2.360
Parana Technologies
$4.903
$4.560
IDEA Electronic Components Group
$5.272
$5.008
DigiPath Technology Company
$8.224
$7.895
Microchip USA
$16.580
$16.470
$16.420
$16.370
The plastic/epoxy material used for the package body provides durability and protection for the internal components of the operational amplifier.
With a low maximum input offset voltage, this operational amplifier is suitable for applications requiring high precision and accuracy.
The low maximum average bias current ensures minimal power consumption and helps maintain stability in the amplifier's performance.
Being surface mountable makes it easy to integrate this operational amplifier into compact electronic designs, saving space and simplifying assembly.
The presence of frequency compensation ensures stability and prevents oscillations in the amplifier's operation, making it reliable for various signal processing applications.
Operational Amplifiers (Op Amps) OP183GS-REEL7 attributes and parameters. Explore more Operational Amplifiers (Op Amps) devices from Analog Devices
Amplifier Type:
Architecture:
Technology:
Power Supply:
Total Functions:
Sub-Category:
Frequency Compensation:
Low-Offset:
Nominal Unity Gain Bandwidth:
Nominal Common Mode Rejection Ratio (CMRR ):
Minimum Common Mode Rejection Ratio (CMRR ):
Input Offset Voltage Limit:
Minimum Voltage Gain:
Minimum Slew Rate:
Nominal Slew Rate:
Peak Bias Current:
Maximum Bias Current (IIB) @25 °C:
Nominal Supply Voltage:
Maximum Supply Voltage:
Maximum Negative Supply Voltage:
Minimum Negative Supply Voltage:
Lowest Operating Temperature:
Maximum Operating Temperature:
Peak Reflow Temperature:
Maximum Supply Current:
Length:
Width:
Maximum Seated Height:
Total Terminals:
Terminal Pitch:
Terminal Position:
Terminal Form:
Terminal Finish:
Package Body Material:
Surface Mount:
Moisture Sensitivity Level (MSL):
Temperature Grade:
Qualified:
JESD-30 Code:
JESD-609 Code:
Packing Method:
Package Code:
Package Shape:
Package Style:
Package Equivalence Code:
OP183GS-REEL7 Amplifiers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
2N2222A
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
MBRA160T3G
Onsemi
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
BAV99
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148W-7-F
Diodes Incorporated
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
FDV303N
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
2N7002
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
Fairchild Semiconductor
Toshiba
MBR0520LT1G
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Dc Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Frontier Electronics
LM324ADG
LM324ADG by Onsemi is a quad operational amplifier with 4 functions. It features a max input offset voltage of 3000 uV and a nominal common mode reject ratio of 70 dB. With micropower technology, it is ideal for applications requiring low bias current and high voltage gain in commercial temperature grades.
LMC7101AIM5/NOPB
LMC7101AIM5/NOPB by Texas Instruments is a micropower operational amplifier with low-bias current and CMOS technology. It features a max input offset voltage of 6000 uV, 74 dB common mode reject ratio, and 1000 kHz unity gain bandwidth. Ideal for industrial applications requiring precise signal amplification in compact designs.
OPA365AIDBVR
OPA365AIDBVR by Texas Instruments is a CMOS Operational Amplifier with low-offset and low-bias features. It has a max input offset voltage of 200uV, nominal voltage of 5V, and operates in automotive temperature grade. Ideal for applications requiring precise signal amplification in compact spaces due to its small outline package style.
TL084CD
TL084CD by Texas Instruments is a quad operational amplifier with 4 functions. It features a max input offset voltage of 20mV, min slew rate of 8V/us, and nominal unity gain bandwidth of 3MHz. Widely used in commercial applications due to its low-bias current, high common mode rejection ratio, and voltage-feedback architecture.
OPA541AP
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 11; Package Code: ZIP; Package Shape: RECTANGULAR;
INA193AIDBVTG4
Texas Instruments' INA193AIDBVTG4 is a 5-terminal operational amplifier in a small outline, low profile package. With nickel palladium gold finish and gull wing terminal form, it has automotive temperature grade suitability. Its compact dimensions of 2.9mm length, 1.6mm width, and 1.45mm seated height make it ideal for space-constrained applications in automotive electronics.
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
OPA2132UA/2K5
OPA2132UA/2K5 by Texas Instruments is a dual operational amplifier with 500uV max input offset voltage and 100dB nominal CMRR. Ideal for automotive applications, it operates at -40 to 125°C, has a unity gain bandwidth of 8MHz, and low bias current of 0.00005uA.
LM321MF/NOPB
LM321MF/NOPB by Texas Instruments is an Operational Amplifier with a max input offset voltage of 9000 uV, bias current of 0.5 uA, and common mode reject ratio of 85 dB. It is used in industrial applications for its high unity gain bandwidth, low power consumption (0.7 mA), and wide supply voltage range (3-30 V).
OPA2350EA/2K5
OPA2350EA/2K5 by Texas Instruments is a CMOS operational amplifier with low-offset and low-bias features. It offers a max input offset voltage of 500uV, nominal unity gain bandwidth of 38MHz, and operates at an industrial temperature grade. Ideal for precision applications requiring high common mode rejection ratio and low bias current consumption.
LM107H
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
LMC6482IMX/NOPB
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
OPA2140AIDGKT
OPA2140AIDGKT by Texas Instruments is a dual operational amplifier with low-offset and low-bias features. It has a max input offset voltage of 120uV, nominal common mode reject ratio of 140dB, and nominal unity gain bandwidth of 11MHz. Ideal for automotive applications due to its temperature grade and small outline package style.
LMC7101BIM5
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
LM324D
LM324D by Texas Instruments is a quad operational amplifier with 4 functions, featuring low bias current of 0.25uA @25C and micropower technology. With a max supply voltage limit of 32V, it is ideal for applications requiring high common mode rejection ratio (80dB) and frequency compensation at 1200kHz. The small outline package makes it suitable for compact designs in commercial temperature grade environments.
LM324DG
LM324DG by Onsemi is a quad operational amplifier with 4 functions. It features a max input offset voltage of 7000 uV and a nominal common mode reject ratio of 70 dB. With micropower technology, it operates at temperatures from 0 to 70 °C, making it ideal for commercial applications requiring low power consumption and high precision amplification.
OPA4376AIPWG4
OPA4376AIPWG4 by Texas Instruments is a CMOS operational amplifier with low-offset and low-bias features. It has a max input offset voltage of 25uV, nominal unity gain bandwidth of 5500kHz, and operates at temperatures ranging from -40 to 125 °C. Ideal for automotive applications due to its compact size and high common mode reject ratio of 90dB.
LMP7721MAX/NOPB
LMP7721MAX/NOPB by Texas Instruments is an Operational Amplifier with low-offset and low-bias features. It has a max input offset voltage of 150uV, nominal voltage of 2.5V, and min slew rate of 9.3V/us. Ideal for automotive applications due to its temperature grade and compact package style.
INA138NA/250
The Texas Instruments INA138NA/250 is a voltage-feedback operational amplifier with 1000uV max input offset voltage and 10uA max average bias current. Ideal for automotive applications, it offers a 120dB nominal CMRR, operates from -40 to 125 °C, and has a supply voltage of 5V.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADMV8420ACPZ
Analog Devices
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
OP184ESZ
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
OP184ESZ-REEL7
Analog Devices OP184ESZ-REEL7 is an Operational Amplifier with 200uV Max Input Offset Voltage, 90dB Nominal CMRR, and 2.4V/us Min Slew Rate. Ideal for automotive applications due to -40 to 125°C operating temp range and low-offset design for precision signal processing in compact systems.
OP184FSZ-REEL7
OP184FSZ
OP184ESZ-REEL
OP184FS-REEL7
OP184ES-REEL7
OP184FS
The Analog Devices OP184FS is an operational amplifier with a low input offset voltage of 375uV, making it ideal for precision applications. With a max bias current of 0.575uA and a common mode rejection ratio of 90dB, it ensures accurate signal processing in automotive temperature grades. Its compact rectangular package and surface-mount capability make it suitable for space-constrained designs requiring high gain bandwidth up to 4250kHz.
OP184FSZ-REEL
OP184FS-REEL
OP183GSZ
OP184FP
OP183GSZ-REEL
OP183GBC
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 5; Package Code: DIE; Package Shape: RECTANGULAR;
OP181GS
OP183GP
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
OP183GSZ-REEL7
OP184EP
OP183GS
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved