Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Analog Devices' MAX8559EBAP2-T is a BICMOS technology-based LDO regulator with 2.5V and 1.8V output voltages, 0.3A max output current per channel, and 0.12V dropout voltage. Ideal for applications requiring fixed positive multiple outputs in compact designs with surface mount capability.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Anansix
Digiode
MARBEL Systems
$7.161
Semicontronic
$7.500
$7.312
$7.275
Texas Native Microelectronics
$8.231
$7.902
$7.655
$7.243
AZTECH Wire
$9.610
$9.230
$9.040
$8.860
Kenton Components
$9.877
$8.692
One Stop Electronics
$16.500
Qasali Group International
$22.224
$20.668
$19.557
Corphita
This material is lightweight and durable, making the regulator easy to handle and resistant to damage during handling and installation.
Low dropout voltage ensures efficient power conversion and minimal energy loss, leading to better overall performance.
Surface mount capability allows for easy and efficient PCB assembly, saving time and labor costs.
Wide operating temperature range ensures the regulator can function reliably in various environmental conditions without overheating.
BICMOS technology combines the advantages of both bipolar and CMOS technologies, providing high performance and power efficiency.
Stable and accurate output voltage ensures consistent power supply to connected components, preventing damage due to voltage fluctuations.
The minimum output voltage ensures compatibility with devices that require higher voltage levels, increasing the versatility of the regulator.
Tight voltage tolerance ensures precise voltage regulation, maintaining the stability and reliability of the connected circuitry.
The nominal output voltage provides a standard voltage level that is commonly required by many electronic components, making the regulator suitable for a wide range of applications.
This type of regulator offers multiple stable and regulated output voltages, allowing for efficient power distribution to different components within the same circuit.
Fixed Regulators - Positive Multiple Output LDO MAX8559EBAP2-T attributes and parameters. Explore more Fixed Regulators - Positive Multiple Output LDO devices from Analog Devices
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Dropout Voltage-2:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current-1:
Maximum Output Current-2:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Maximum Output Voltage-2:
Minimum Output Voltage-2:
Nominal Output Voltage-2:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Voltage Tolerance:
Width:
MAX8559EBAP2-T Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
1N4148
Wuxi Xuyang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM555CM
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
Surge Components
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Grande Electronics
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LL4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
1N4148WS
Meritek Electronics
2N2222A
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
General Semiconductor
2N7002
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
Loras Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MAX8530ETTKO+
Analog Devices
Analog Devices' MAX8530ETTKO+ is a BICMOS technology-based LDO regulator with 2.5V min input voltage, 0.2A max output current-1, and 3% max voltage tolerance. It features dual terminals in a small outline package style and is ideal for applications requiring fixed positive multiple output regulation.
MAX8559EBAJG
Analog Devices' MAX8559EBAJG is a BICMOS technology-based LDO regulator with 2 outputs. It offers a max dropout voltage of 0.12 V, operating temperature up to 150 °C, and a package style of GRID ARRAY for applications requiring fixed positive multiple output regulation in compact spaces.
5962-0722501VSC
Texas Instruments
Texas Instruments' 5962-0722501VSC is a CMOS technology-based LDO regulator with dual outputs. It offers fixed output voltages of 3.3V and 2.5V, with max currents of 1A and 2A respectively. Ideal for applications requiring precise voltage regulation in harsh environments due to MIL-PRF-38535 Class V screening level.
LP3996SD-0833
LP3996SD-0833 by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It offers a Max Dropout Voltage of 0.55V and 0.22V, suitable for applications requiring stable voltage regulation in tight spaces. Operating temperature ranges from -40°C to 125°C, making it ideal for various electronic devices.
TPS70148PWPG4
TPS70148PWPG4 by Texas Instruments is a PMOS technology-based LDO regulator with 2 outputs. It offers a max dropout voltage of 0.275 V, operating temperature range from -40 to 125°C, and a package style of small outline with heat sink. Ideal for applications requiring fixed positive multiple output regulation in compact designs.
LP5996SD-2828/NOPB
LP5996SD-2828/NOPB by Texas Instruments is a fixed positive multiple output LDO regulator with a max dropout voltage of 0.55V and 0.22V. It is surface mountable and operates at temperatures ranging from -40°C to 125°C. This regulator is commonly used in applications that require stable power supply with low dropout voltage, such as portable electronic devices.
TPS73HD318PWPR
TPS73HD318PWPR by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It has a Max Dropout Voltage of 0.8 V, operating temperature range from -40 to 125°C, and can handle a max output current of 0.75 A per output. Ideal for applications requiring stable voltage regulation in compact designs.
TPS71926-15DRVRG4
TPS71926-15DRVRG4 by Texas Instruments is a BICMOS technology-based LDO regulator with 2.7V min input voltage, 6.5V max input voltage, and 0.2A max output current for each of its two outputs. It comes in a small outline package suitable for applications requiring fixed positive multiple output regulation in compact spaces.
LP2967IBP-1825
LP2967IBP-1825 by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It offers a Max Dropout Voltage of 0.425 V, operating temperature range from -40 to 125 °C, and a package style of GRID ARRAY. Ideal for applications requiring precise voltage regulation in compact electronic devices.
NCV8613BMNR2G
NCV8613BMNR2G by Onsemi is a Fixed Positive Multiple Output LDO Regulator with 3.3V and 5V nominal output voltages, suitable for applications requiring stable power supply. It features a small outline package style, surface mount compatibility, and an operating temperature range from -40 °C to 150°C.
NCP3335ADM280R2G
NCP3335ADM280R2G by Onsemi is a Fixed Positive Multiple Output LDO Regulator with 2.8V nominal output voltage, 0.34V max dropout voltage, and 0.5A max output current per channel. Ideal for applications requiring stable power supply in compact spaces with operating temperatures ranging from -40 to 150 °C.
MCP1722-3310H/S7X
Microchip Technology
MCP1722-3310H/S7X by Microchip Technology is a fixed positive multiple output LDO regulator with a max dropout voltage of 0.75V and operating temperature range from -40°C to 150°C. It is suitable for applications requiring a min input voltage of 11V and provides two outputs with nominal voltages of 10V and 3.3V.
NCP3335AMN280R2G
NCP3335AMN280R2G by Onsemi is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It offers a Max Dropout Voltage of 0.34 V, operates in temperatures ranging from -40 to 150 °C, and has a Max Output Current of 0.5 A per output. Ideal for applications requiring stable voltage regulation in compact spaces.
LP3986TL-3333/NOPB
LP3986TL-3333/NOPB by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 3.3V nominal output voltage, 0.1V max dropout voltage, and 3% max voltage tolerance. Ideal for applications requiring stable power supply in compact devices due to its small form factor and high efficiency.
LM2935D2T
LM2935D2T by Onsemi is a fixed positive multiple output LDO regulator with 5V nominal output voltage. It has a max dropout voltage of 0.7V, operating temperature range from -40 to 125 °C, and can handle up to 0.75A output current. Ideal for applications requiring stable power supply in compact designs.
LP3996SD-3333/NOPB
LP3996SD-3333/NOPB by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 3.3V nominal output voltage, 0.22V max dropout voltage, and 0.15A max output current. Ideal for applications requiring stable power supply in compact spaces such as IoT devices and portable electronics.
MIC5330-SGYML-TR
MIC5330-SGYML-TR by Microchip: Fixed Positive Multiple Output LDO Regulator with 3.3V and 1.8V outputs, 3% voltage tolerance, and 0.2V max dropout voltage. Ideal for applications requiring stable power supply in compact spaces with dual terminals and small outline package style.
LP2967IBPX-2828
LP2967IBPX-2828 by Texas Instruments is a fixed positive multiple output LDO regulator with 2.8V nominal output voltage and 0.425V max dropout voltage. It has a package style of grid array, very thin profile, fine pitch, making it suitable for applications requiring precise voltage regulation in compact spaces at temperatures ranging from -40 to 125°C.
TLV7111833DDSER
TLV7111833DDSER by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2% voltage tolerance. It offers dual outputs at 1.8V and 3.3V, ideal for applications requiring precise voltage regulation in compact designs. Operating temperature range from -40 to 125°C makes it suitable for various electronic devices.
NCP152MX300280TCG
NCP152MX300280TCG by Onsemi is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It has a Max Dropout Voltage of 0.26V and 0.22V, suitable for applications requiring stable voltage regulation in compact spaces. Operating temperature range from -40 °C to 85°C makes it ideal for various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
MAX8530EBTJJ+
Maxim Integrated
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: VFBGA; Terminal Form: BALL; Maximum Voltage Tolerance: 3 %; Peak Reflow Temperature (C): 260;
MAX8530ETTO2
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: VSON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 7 V; Maximum Voltage Tolerance: 3 %;
MAX8530ETTO2-T
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: HVSSON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 7 V; Maximum Voltage Tolerance: 3 %;
MAX8530EBTJO+
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: VFBGA; Terminal Form: BALL; Maximum Voltage Tolerance: 3 %; No. of Functions: 1;
MAX8530EBTKG+
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: VFBGA; Terminal Form: BALL; Maximum Voltage Tolerance: 3 %; Terminal Position: BOTTOM;
MAX8530ETTP2
MAX8530ETTO2+
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Voltage Tolerance: 3 %; Maximum Output Voltage-2: 1.854 V;
MAX8531EBTGG+T
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: VFBGA; Terminal Form: BALL; Maximum Input Voltage Absolute: 7 V; Maximum Voltage Tolerance: 3 %;
MAX8530ETTKO+T
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Voltage Tolerance: 3 %; Terminal Pitch: .95 mm;
MAX8530ETTKO
MAX8530ETTP2-T
MAX8531EBTGG
MAX8530ETTO2+T
MAX8531EBTGG+
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: VFBGA; Terminal Form: BALL; Maximum Voltage Tolerance: 3 %; Operating Temperature (TJ-Max): 150 Cel;
MAX8531ETTGG+
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Voltage Tolerance: 3 %; Maximum Output Voltage-1: 3.09 V;
MAX8531EBTGG-T
MAX8530ETTKO-T
MAX8530EBTKG+T
MAX8530EBTJO+T
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved