Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MAX3430ESA+ by Analog Devices is a BICMOS line transceiver with EIA-422, EIA-485, TIA-485 interface standards. It operates at 3.3V with 1500ns max transmit delay and 120ns max receive delay. Ideal for industrial applications requiring differential output and Schmitt trigger input characteristics.
Median Price
$12.085
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Farnell
1+ parts
$10.088
100+ parts
$7.547
1k+ parts
$5.726
10k+ parts
-
Analog Devices Inc
$11.330
$7.588
$6.914
Newark
$11.670
$7.820
$7.280
DigiKey
$12.500
$8.424
$7.688
Mouser Electronics
$12.880
$8.670
$8.120
Element14
$14.390
$10.770
$8.270
Nova Conductors
$5.752
Bristol Electronics
$8.512
$3.973
Digiode
$9.584
Chip Stock
Infinite Electronics LLP
Vyrian
Anansix
Netsource Technology, Inc.
ACDS - Activité Composants Distribution Service
Prism Electronics
Rebound Electronics
ComSIT Distribution GmbH
LWI Electronics Inc
Holdelec - ElecDif-Pro
Semtec, LLC
Sensible Micro Corp
Corohmni
$4.731
Vigor
$5.200
MARBEL Systems
$5.512
Netroflash
$5.465
$5.350
Texas Native Microelectronics
$6.336
$6.083
$5.892
$5.576
Kenton Components
$7.603
$6.691
Continental Prestige Electronics
$7.770
$5.820
$4.850
Ampacity Inc.
$8.570
Semicontronic
$8.356
$8.313
Corphita
$9.079
Advanced Electronics
$13.883
$13.189
Qasali Group International
$17.107
$15.910
$15.054
Microchip USA
$25.396
Perfect Parts
Argo Parts USA
S.R.D Solutions
A-Z Elektronik GmbH
Cyclops Electronics Ltd (Excess)
Kepictronics
ChipstoGo Electronic ltd
The plastic/epoxy material makes the package lightweight and durable, ideal for portable electronic devices.
The surface mount capability allows for easy and efficient PCB assembly, saving time and cost in production.
The high maximum supply voltage ensures compatibility with a wide range of systems and applications.
The rectangular shape allows for easy integration into circuit designs and PCB layouts.
The low transmit delay ensures fast and efficient data transmission, making this product suitable for high-speed communication.
The 3.3V power supply is a common standard in electronics, providing reliable power to the device.
The 8 terminals offer versatile connectivity options, allowing for a variety of input and output configurations.
The small outline package style saves space on the PCB, making it suitable for compact electronic devices.
The low high-level input current ensures efficient power usage and minimal heat generation.
The low minimum supply voltage ensures compatibility with lower power systems while still providing stable operation.
The high maximum operating temperature allows for reliable performance in a wide range of environmental conditions.
The low minimum operating temperature ensures the product can operate in harsh cold environments without issues.
The matte tin finish provides good solderability and electrical conductivity, ensuring reliable connections.
The dual terminal position allows for flexibility in mounting and connection options, accommodating different PCB layouts.
The low seated height saves space on the PCB, making it suitable for slim and compact electronic devices.
The moderate width allows for easy integration into PCB designs without taking up excessive space.
The high maximum output low current capability ensures compatibility with a wide range of devices and components.
The differential output provides noise immunity and improved signal integrity, making this product ideal for high-quality data transmission.
The specified time at peak reflow temperature ensures proper soldering and assembly during manufacturing processes.
The high peak reflow temperature allows for efficient and reliable soldering of the components onto the PCB.
The moderate length of the product allows for easy integration into various PCB layouts and designs.
The specified minimum output swing ensures effective signal transmission and reception, even with low amplitude signals.
The industrial temperature grade ensures the product can operate reliably in harsh industrial environments with temperature fluctuations.
The low receive delay ensures fast and efficient data reception, complementing the high-speed transmit capabilities of the product.
The BiCMOS technology combines the advantages of both bipolar and CMOS technologies, providing high-speed operation and low power consumption.
The gull-wing terminal form allows for easy surface mounting and rework, enhancing the product's reliability and ease of installation.
The compatibility with multiple interface standards allows for versatile connectivity and interoperability with various systems and devices.
The low maximum supply current consumption ensures efficient power usage and minimal heat dissipation in the device.
The differential Schmitt trigger input characteristics provide hysteresis and noise immunity, ensuring reliable signal processing and data integrity.
The nominal 3.3V supply voltage is a common standard in electronics, providing stable and reliable power to the product.
The standard terminal pitch allows for easy integration into PCB designs and compatibility with standard connectors and headers.
The line transceiver interface IC type enables bidirectional data transmission between different signal levels, making this product ideal for communication applications.
Line Drivers & Receivers MAX3430ESA+ attributes and parameters. Explore more Line Drivers & Receivers devices from Analog Devices
Differential Output:
Driver No. of Bits:
Maximum High Level Input Current:
Input Characteristics:
Interface IC Type:
Interface Standard:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Minimum Out Swing:
Maximum Output Low Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Receive Delay:
Receiver No. of Bits:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Transmit Delay:
Width:
MAX3430ESA+ Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
BAV99
Vishay Sprague
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
2N2222A
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
E8WSDC12-32.768KTR
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
LL4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
LTC2855IDE#PBF
Analog Devices
LTC2855IDE#PBF by Analog Devices is an EIA-485-A/TIA-485-A line transceiver with differential output. It operates at a supply voltage range of 3V to 3.6V and has a max transmit delay of 50ns. Ideal for industrial applications requiring reliable communication over long distances.
MAX3232EIDRE4
The Texas Instruments MAX3232EIDRE4 is a Line Driver & Receiver with 16 terminals, operating at 3.3/5V. It features EIA-232-F, TIA-232-F, V.28 interface standards and Schmitt trigger input characteristics. Ideal for industrial applications requiring reliable data transmission over short distances with low power consumption.
MAX3221IPWRE4
MAX3221IPWRE4 by Texas Instruments is a line driver and receiver with a max supply voltage of 5.5V. It has a small outline, thin profile package style and is suitable for industrial applications.
MAX485ESA-T
Maxim Integrated
MAX485ESA-T by Maxim Integrated is a CMOS line transceiver with 8 terminals, operating at 5V. It features EIA-422 and EIA-485 interface standards, with a max supply voltage of 5.25V and output polarity as complementary. Ideal for industrial applications requiring differential outputs and Schmitt trigger inputs.
MAX3232EUE
MAX3232EUE by Maxim Integrated is a Line Driver & Receiver with 3.3/5V power supplies, operating from -40 to 85°C. It features EIA-232 and EIA-562 interface standards, SCHMITT TRIGGER input characteristics, and GULL WING terminal form. Ideal for industrial applications requiring reliable communication over long distances.
ISO1410BDWR
ISO1410BDWR by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at -40 to 125 °C. It features EIA-485-A, TIA-485-A, and EIA-422 interface standards, with a max transmit delay of 570 ns. Ideal for automotive applications due to its small outline package and differential output capabilities.
ISL83072EIUZA-T
Intersil
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
SN65HVD485EDGKRG4
SN65HVD485EDGKRG4 by Texas Instruments is an EIA-485-A/TIA-485-A line transceiver with 5V supply voltage, 30ns max transmit delay, and 200ns max receive delay. Ideal for industrial applications requiring differential output and Schmitt trigger input characteristics in a small outline package.
MAX3232CPWRE4
MAX3232CPWRE4 by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at 3.3/5V. It has a max transmit delay of 300ns and can handle up to 1.6A output low current. Ideal for EIA-232-F, TIA-232-F, V.28 interfaces in commercial temperature grade applications.
THVD1450DRBR
THVD1450DRBR by Texas Instruments is an EIA-485-A/TIA-485-A line transceiver with 8 terminals, operating at -40 to 125 °C. It offers differential output, 20 ns max transmit delay, and 40 ns max receive delay. Ideal for automotive applications due to its small outline package and low supply voltage requirements of 3-5.5 V.
MAX3232IPWRG4
MAX3232IPWRG4 by Texas Instruments is a Line Driver & Receiver with 16 terminals. It operates at 3.3/5V, has a max supply voltage of 3.6V, and supports EIA-232-F, TIA-232-F, V.28 interfaces. Ideal for industrial applications requiring inverted output polarity and Schmitt trigger input characteristics within -40 to 85°C temperature range.
PTHVD1400DRLR
PTHVD1400DRLR by Texas Instruments is an EIA-485-A/TIA-485-A line transceiver with differential output and input characteristics. It operates in automotive-grade conditions, with a max supply voltage of 5.5V and transmit delay of 500ns. This small outline package is ideal for applications requiring high-speed data transmission in tight spaces.
ADM3101EACPZ
ADM3101EACPZ by Analog Devices is a CMOS line transceiver with 12 terminals, operating at 3.3V. It supports EIA-232, TIA-232, V.28 interfaces and has a max output low current of 1.6A. Ideal for industrial applications requiring differential input characteristics and a supply voltage range of 3-5.5V.
MAX3483EESA+T
MAX3483EESA+T by Analog Devices is a line driver/receiver with 8 terminals, operating at 3-3.6V. It offers EIA-422/EIA-485 interface standards, differential output, and 1500ns max transmit delay. Ideal for industrial applications requiring reliable communication over short distances.
THVD2450DRBR
THVD2450DRBR by Texas Instruments is a line transceiver with differential output and Schmitt trigger input characteristics. It operates at supply voltages b/w 3V to 5.5V, making it suitable for automotive applications. With a max transmit delay of 350ns and receive delay of 80ns, it ensures efficient data transmission in harsh environments.
P82B96PWR
P82B96PWR by Texas Instruments is a Line Transceiver with 2 functions, operating at 5V nominal voltage. It features a small outline package style, dual terminal position, and industrial temperature grade. Ideal for applications requiring standard input characteristics and peak reflow temperature of 260°C.
MAX3232ESE+G1Z
LINE TRANSCEIVER;
AD8138ARZ-R7
AD8138ARZ-R7 by Analog Devices is a Line Driver with 8 terminals, operating at -40 to 85 °C. It has a supply voltage range of 1.4V to 5.5V and offers differential output for industrial applications requiring high-speed signal transmission. The package style is small outline, making it suitable for surface mount designs in various electronic systems.
MAX3160EEAP-T
MAX3160EEAP-T by Maxim Integrated is a Line Driver & Receiver with 3.3/5V supplies, 800ns max transmit delay, and 150ns max receive delay. It's used in industrial applications requiring EIA-232, EIA-422, or EIA-485 interfaces for reliable data transmission over short distances.
SP3485EN-L/TR
Maxlinear
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
MAX3232CDR
The Texas Instruments MAX3232CDR is a Line Driver & Receiver with 16 terminals, operating at 3.3/5V. It features inverted output polarity, Schmitt trigger input characteristics, and EIA-232-F interface standard. Ideal for applications requiring fast data transmission with low power consumption in commercial temperature range.
MAX3232EIPWRQ1
MAX3232EIPWRQ1 by Texas Instruments is a Line Driver & Receiver with 16 terminals. It operates at 3.3/5V, has a max supply voltage of 3.6V, and supports EIA-232-F, TIA-232-F, V.28 interfaces. Ideal for industrial applications requiring inverted output polarity and Schmitt trigger input characteristics.
MAX3232IPWR
MAX3232IPWR by Texas Instruments is a Line Driver & Receiver with 16 terminals. It operates at 3.3/5V, has a max supply voltage of 3.6V, and features inverted output polarity. Ideal for industrial applications requiring EIA-232-F, TIA-232-F, V.28 interface standard compliance with a small outline package style.
MAX3232EIDR
MAX3232EIDR by Texas Instruments is a line driver and receiver with a max supply voltage of 3.6V. It has 2 functions and is used in applications requiring EIA-232-F, TIA-232-F, or V.28 interface standards.
MAX3232EIPWR
MAX3232EIPWR by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at 3.3/5V. It has inverted output polarity, Schmitt trigger input characteristics, and supports EIA-232-F interface standard. Ideal for industrial applications requiring reliable data transmission over short distances.
MAX3232ESE
MAX3232ESE by Maxim Integrated is a Line Driver & Receiver with 3.3/5V power supplies, operating temperature of -40 to 85 °C. It has EIA-232 and EIA-562 interface standards, Schmitt trigger input characteristics, and inverted output polarity. Ideal for industrial applications requiring reliable communication over long distances.
MAX3232ESE+
MAX3232ESE+ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3/5V. It features Totem-Pole output, Inverted polarity, and Schmitt Trigger input for EIA-232/TIA-232 interface standard. Ideal for industrial applications requiring reliable communication over long distances.
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
MAX3232IDR
The Texas Instruments MAX3232IDR is a Line Driver & Receiver with 16 terminals, operating at 3.3/5V. It features a max transmit delay of 300ns and can handle up to 1.6A output low current. Ideal for industrial applications requiring EIA-232-F, TIA-232-F, V.28 interface standards in compact designs.
MAX3232CPWR
MAX3232CPWR by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at 3.3/5V. It features inverted output polarity, Schmitt trigger input characteristics, and EIA-232-F interface standard. Ideal for applications requiring reliable communication in commercial temperature range.
MAX3232IDRG4
MAX3232IDRG4 by Texas Instruments is a Line Driver & Receiver with 16 terminals. It operates at 3.3/5V, has a max supply voltage of 3.6V, and offers inverted output polarity. Ideal for industrial applications requiring EIA-232-F, TIA-232-F, V.28 interface standard compliance with a temperature range of -40 to 85°C.
MAX3232EUE+
MAX3232EUE+ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3-5.5V. It features EIA-232/TIA-232 interface standard, CMOS technology, and Schmitt trigger input characteristics. Ideal for industrial applications requiring reliable data transmission in harsh environments.
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
MAX3232CPWRG4
MAX3232CPWRG4 by Texas Instruments is a Line Driver & Receiver with 16 terminals. It operates at 3.3/5V, has a max supply voltage of 3.6V, and offers inverted output polarity. Ideal for EIA-232-F, TIA-232-F, V.28 interfaces in commercial temperature grade applications.
MAX3232IDBR
MAX3232IDBR by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at -40 to 85 °C. It has a max supply voltage of 3.6 V and peak reflow temperature of 260 C. Ideal for EIA-232-F, TIA-232-F, V.28 interfaces in industrial applications due to its inverted output polarity and Schmitt trigger input characteristics.
MAX3221EIPWR
MAX3221EIPWR by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at 3.3/5V. It has a max supply voltage of 3.6V and can handle industrial temperatures from -40 to 85°C. Ideal for EIA-232-F, TIA-232-F, V.28 interfaces due to its Schmitt trigger input characteristics and inverted output polarity.
MAX3485ESA+
MAX3485ESA+ by Analog Devices is a CMOS line transceiver with EIA-422 and EIA-485 interface standards. It operates at 3.3V, has 8 terminals, and offers differential outputs. With a max transmit delay of 35ns, it's ideal for industrial applications requiring high-speed data transmission in harsh environments.
MAX3485ESA
MAX3485ESA by Maxim Integrated is a CMOS Line Transceiver with 3.3V supply, 35ns max transmit delay, and EIA-422/EIA-485 interface. Ideal for industrial applications requiring differential output and Schmitt trigger input characteristics in a compact small outline package.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved