Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MAX291PA by Analog Devices is an active filter with 8 poles and zeros, operating at a max cutoff frequency of 50 kHz. Its switched capacitor design offers Butterworth response for low-pass filtering applications. The through-hole package style with tin-lead finish makes it suitable for various electronic circuits requiring precise signal processing.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Anansix
Digiode
Semicontronic
$4.690
$4.573
$4.549
One Stop Electronics
AZTECH Wire
$6.439
MARBEL Systems
$16.648
Texas Native Microelectronics
$19.136
$17.796
$16.840
Kenton Components
$22.963
$20.208
Qasali Group International
$51.667
Corphita
The use of plastic/epoxy material makes the product lightweight and durable, ensuring long-term reliability.
The rectangular shape allows for easy integration into circuit board layouts and provides a neat and organized appearance.
The through-hole terminals facilitate easy installation and soldering onto circuit boards.
The nominal negative supply voltage allows for proper functioning of the filter within the specified voltage range.
Switched capacitor filters offer high precision and accuracy in filtering signals, making them ideal for various applications.
The nominal supply voltage of 5V ensures compatibility with standard voltage requirements in electronic circuits.
Having 8 terminals provides flexibility in connecting the filter to other components in a circuit.
The in-line package style allows for efficient space utilization on the circuit board.
The presence of 8 poles and 0 zeros indicates the filter's ability to effectively shape the frequency response as desired.
The terminal pitch of 2.54mm ensures compatibility with standard breadboard and PCB layouts, enabling easy prototyping and assembly.
The tin lead finish on the terminals provides good electrical conductivity and solderability, ensuring reliable connections.
The dual terminal position allows for versatile mounting options and easy integration into various circuit configurations.
The maximum seated height of 4.572mm ensures compatibility with compact electronic devices and space-constrained applications.
The width of 7.62mm is compact and space-efficient, making the filter suitable for applications with limited board space.
The maximum center/cutoff frequency range of 50 kHz allows for filtering signals within a wide frequency band, making the filter versatile.
The lowpass response type ensures that high-frequency signals are attenuated, making the filter effective for removing unwanted noise.
The Butterworth transfer characteristics offer a maximally flat frequency response in the passband, ensuring minimal distortion of the filtered signal.
The length of 9.375mm is compact, making the filter suitable for space-constrained applications and compact electronic devices.
The minimum center/cutoff frequency range of 0.0001 kHz ensures that the filter can effectively filter out low-frequency signals with precision.
Active Filters MAX291PA attributes and parameters. Explore more Active Filters devices from Analog Devices
Nominal Supply Voltage:
Nominal Negative Supply Voltage:
Response Type:
Filter Technology:
Maximum Frequency - Cutoff or Center:
Minimum Frequency - Cutoff or Center:
Transfer Characteristics:
Poles and Zeros:
Total Functions:
Total Terminals:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Length:
Width:
Seated Height Limit:
Package Style:
Form Factor:
Package Code:
Package Body Material:
Surface Mounting:
JESD-30 Code:
JESD-609 Code:
Special Features:
Qualified:
MAX291PA Active Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
1N4148
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
1N4148WT
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
MBR0520LT1
Onsemi
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Eic Semiconductor
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
2N2222A
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
LM317D2TG
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
MAX274ACWI+T
Analog Devices
MAX274ACWI+T by Analog Devices is a 28-terminal active filter with -5.5V to 5.5V supply voltage range, suitable for commercial applications. It features GULL WING terminals, PLASTIC/EPOXY package material, and operates b/w 0 °C to 70°C temperature range in surface-mount configuration.
TLC04CD
Texas Instruments
TLC04CD by Texas Instruments is an 8-terminal active filter with a switched capacitor technology. It operates on +-5V supplies, has a cutoff frequency range of 40 kHz, and features a lowpass Butterworth response type. Ideal for commercial applications requiring precise filtering in compact designs.
LTC1563-2CGN
LTC1563-2CGN by Analog Devices is a 16-terminal active filter with continuous time filtering, operating b/w 0 °C to 70°C. It features a lowpass response type with Butterworth transfer characteristics and a cutoff frequency range of 0.256 kHz to 256 kHz. Ideal for applications requiring precise signal processing in commercial temperature environments.
SSM2044P
Analog Devices' SSM2044P is a bipolar active filter with 16 terminals, -15V to +15V supply voltage, and 11.5mA max current. Ideal for lowpass filtering applications in commercial-grade environments with operating temperatures from 0°C to 70°C.
LTC1264-7CN#TRPBF
LTC1264-7CN#TRPBF by Analog Devices is a 14-terminal active filter with -8V to 8V supply voltage range, offering Bessel response type and lowpass transfer characteristics. Ideal for industrial applications requiring a cutoff frequency range of 200kHz to 250kHz, it features a rectangular package shape with through-hole terminals.
LTC1063CN8
LTC1063CN8 by Analog Devices is an 8-terminal active filter with a max cutoff frequency of 50 kHz. It operates in an industrial temperature range from -40 to 85 °C, suitable for lowpass filtering applications. The package style is in-line with a rectangular shape and through-hole terminals made of plastic/epoxy material.
TLC10CFN
TLC10CFN by Texas Instruments is a CMOS active filter with 2 functions, operating at -4V to 6V. It features a switched capacitor filter with a cutoff frequency range of 20 kHz. Ideal for commercial applications requiring resistor programmable transfer characteristics in a square chip carrier package.
LTC1064CSW#TR
LTC1064CSW#TR by Analog Devices is a 24-terminal active filter with switched capacitor technology. It operates at temperatures ranging from -40 to 85 °C and has a cutoff frequency range of 0.0001 kHz to 140 kHz. Ideal for industrial applications requiring resistor programmable transfer characteristics.
LTC1068-25IG#PBF
LTC1068-25IG#PBF by Analog Devices is a 4-function switched capacitor active filter with -5.5V to 5.5V supply voltage range, operating from -40 °C to 85°C. It features a cutoff frequency range of 0.004 kHz to 200 kHz and is ideal for industrial temperature grade applications requiring resistor programmable transfer characteristics in a small outline package.
5151-20
Data Delay Devices
5151-20 by Data Delay Devices is a rectangular active filter with 16 pin terminals. It operates b/w -18V to +18V and has a cutoff frequency range of 0.02 kHz. Ideal for commercial applications requiring lowpass Butterworth transfer characteristics at temperatures ranging from 0°C to 70°C.
MAX271CPP
Analog Devices' MAX271CPP is a CMOS active filter with 2 functions, -5V to +5V supply voltage, and 6.5mA max current. Ideal for commercial applications, it operates b/w 0 °C to 70°C temperature range in a rectangular package with through-hole terminals.
MF10CCWM
The Texas Instruments MF10CCWM is a CMOS active filter with 2 functions, suitable for switched capacitor filtering. It features a small outline package with Gull Wing terminals and operates b/w 0°C to 70°C. With response types including Butterworth and Chebyshev, it's ideal for commercial temperature grade applications.
LTC1068-25IG#TRPBF
LTC1068-25IG#TRPBF by Analog Devices is a 4-function switched capacitor filter with -5.5V max negative supply voltage and 200 kHz max cutoff frequency. Ideal for industrial applications, this active filter has a small outline package style and operates b/w -40 °C to 85°C temperature range.
MAX7414CUA+
Analog Devices' MAX7414CUA+ is a CMOS active filter with 5 poles and 0 zeros, operating at a nominal voltage of 3V. With lowpass Butterworth response type and cutoff frequency range from 0.001 kHz to 15 kHz, it's ideal for applications requiring precise signal filtering in commercial temperature environments.
MAX293CWE+
MAX293CWE+ by Analog Devices is an active switched capacitor filter with 8 poles and 0 zeros. It operates on a supply voltage of +/-5V, has a cutoff frequency range of 25 kHz, and response type is lowpass. Ideal for commercial applications requiring precise signal filtering in compact designs.
MAX293CWE+T
MAX293CWE+T by Analog Devices is an active switched capacitor filter with 8 poles and 0 zeros. It operates at a nominal voltage of 5V, with a max current draw of 22mA. Ideal for lowpass filtering applications in commercial temperature environments.
LTC1060CSW#TRPBF
LTC1060CSW#TRPBF by Analog Devices is a CMOS active filter with 2 functions. It has a max operating temperature of 85°C and a min supply voltage of 2.37V. This switched capacitor filter is commonly used in industrial applications for its universal response type and transfer characteristics (Butterworth/Bessel/Chebyshev).
MAX264BEWI+
SWITCHED CAPACITOR FILTER; Moisture Sensitivity Level (MSL): 1; Terminal Finish: Matte Tin (Sn) - annealed; JESD-609 Code: e3;
MAX274AENG+
MAX274AENG+ by Analog Devices is an active filter with 24 terminals and a rectangular package. It operates at temperatures from -40 to 85°C, with a supply current of 30mA. Ideal for industrial applications requiring precise signal filtering and processing.
LTC1067IS#PBF
LTC1067IS#PBF by Analog Devices is a CMOS active filter with 2 poles and 0 zeros. It operates b/w -40 to 85 °C, has a cutoff frequency range of 0.001 kHz to 40 kHz, and is ideal for industrial applications requiring resistor programmable transfer characteristics.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
MAX292ESA
Maxim Integrated
MAX292ESA by Maxim Integrated is an active filter with 8 poles and zeros, operating at a center frequency range of 0.0001 kHz to 25 kHz. It has a lowpass response type with Bessel transfer characteristics, suitable for industrial applications requiring switched capacitor filters. The package style is small outline, making it ideal for surface mount designs with a terminal pitch of 1.27 mm.
MAX292ESA+
MAX292ESA+ by Analog Devices is an active filter with switched capacitor technology. It operates on +-5V power supplies, has 8 poles and zeros, and a lowpass Bessel response type. With a cutoff frequency range of 0.0001 kHz to 25 kHz, it is ideal for industrial applications requiring precise signal filtering in a compact small outline package.
SWITCHED CAPACITOR FILTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Response Type: LOWPASS;
MAX291CPA
SWITCHED CAPACITOR FILTER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Response Type: LOWPASS;
MAX291CPA+
MAX275BCWP+
Active Filters; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; JESD-30 Code: R-PDSO-G28;
MAX275BCWP
Active Filters; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Maximum Supply Current (Isup): 24 mA;
MAX275BCWP+ by Analog Devices is an active filter with 24mA Isup, -5.5V Vsup, and 70°C max operating temp. Ideal for applications requiring precise signal filtering in commercial-grade environments.
MAX274BEWI
MAX274BEWI by Maxim Integrated is an active filter with 30 mA Isup, -5.5 V to 5.5 V Vsup range, and 28 terminals in a small outline package. It is used in industrial applications for signal processing and noise filtering due to its wide operating temperature range of -40°C to 85°C.
MAX274BEWI+
Active Filters; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Terminal Pitch: 1.27 mm;
Active Filters; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Terminal Finish: MATTE TIN;
MAX274AEWI
MAX274AEWI by Maxim Integrated is an active filter with 30mA Isup, -5.5V to 5.5V Vsup range, and 28 terminals in a small outline package. Ideal for industrial applications requiring precise signal filtering and conditioning in a compact form factor.
MAX274AEWI+
Active Filters; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Minimum Supply Voltage (Vsup): 2.37 V;
Active Filters; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Moisture Sensitivity Level (MSL): 1;
MAX274BCWI
Active Filters; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Maximum Supply Voltage (Vsup): 5.5 V;
MAX274BCWI+
Active Filters; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Nominal Negative Supply Voltage (Vsup): -5 V;
MAX293CPA+
MAX293CPA
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved