Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MAX274AENG-T by Analog Devices is an active filter with 24 terminals, operating at -40 to 85 °C. It has a supply voltage range of -5.5V to 5.5V and comes in a rectangular package suitable for industrial applications. The terminal pitch is 2.54mm, making it ideal for various electronic systems requiring precise filtering capabilities.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Anansix
One Stop Electronics
$1.690
Semicontronic
$5.690
$5.548
$5.519
AZTECH Wire
$18.893
MARBEL Systems
$19.335
Texas Native Microelectronics
$22.224
$20.668
$19.557
Kenton Components
$26.669
$23.469
Qasali Group International
$60.005
Corphita
The use of plastic/epoxy material makes the product lightweight and durable, ideal for various applications.
The nominal supply voltage of 5V ensures stable and reliable operation of the active filters.
With 24 terminals, the product offers flexibility in connectivity and configuration for different circuit designs.
The high maximum operating temperature of 85 °C allows the active filters to function effectively even in demanding environments.
The low minimum operating temperature of -40 °C ensures the active filters can operate in a wide range of temperature conditions.
The maximum supply voltage of 5.5V provides a safety margin for the active filters, preventing damage from voltage spikes.
Active Filters MAX274AENG-T attributes and parameters. Explore more Active Filters devices from Analog Devices
Supply Voltage Limit:
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage:
Maximum Negative Supply Voltage:
Minimum Negative Supply Voltage:
Nominal Negative Supply Voltage:
Maximum Operating Temperature:
Minimum Operating Temperature:
Temperature Grade:
Total Functions:
Total Terminals:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Length:
Width:
Seated Height Limit:
Package Style:
Form Factor:
Package Code:
Package Body Material:
Surface Mounting:
JESD-30 Code:
JESD-609 Code:
Special Features:
Qualified:
MAX274AENG-T Active Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
1N4148
Nexperia
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
LM555CN
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
2N2222A
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Renesas Electronics
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
Texas Instruments
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
1554216004
Molex
WIRE AND CABLE;
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
LM317TG
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
MAX291CPA
MAX291CPA by Maxim Integrated is an active filter with a max supply current of 22mA. It operates on a nominal voltage of 5V and has a lowpass response type with Butterworth transfer characteristics. Ideal for applications requiring switched capacitor filters with a center/cutoff frequency range up to 25kHz.
LTC1060CSW#TR
Analog Devices
LTC1060CSW#TR by Analog Devices is a CMOS active filter with 2 functions, operating at -40 to 85°C. It features switched capacitor technology, a cutoff frequency range of 0.1-20 kHz, and supports Butterworth/Bessel/Chebyshev responses. Ideal for industrial applications requiring precise signal filtering in compact designs.
MAX293ESA+T
SWITCHED CAPACITOR FILTER; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Terminal Finish: MATTE TIN;
LTC1067-50IS
LTC1067-50IS by Analog Devices is a CMOS active filter with 2 functions, operating b/w -40 to 85 °C. It features switched capacitor technology, resistor programmable transfer characteristics, and a cutoff frequency range of 0.001 kHz to 40 kHz. Ideal for industrial applications requiring universal response types in a compact small outline package.
MAX275JP
MAX275JP by Analog Devices is a ceramic, glass-sealed active filter with 2 functions and 20 terminals. It operates on -5V to +5V supply voltage range, offering bandpass/lowpass response type with a cutoff frequency range of 0.1 kHz to 300 kHz. Ideal for applications requiring resistor programmable transfer characteristics in a compact rectangular package style.
LTC1069-7CS8#PBF
LTC1069-7CS8#PBF by Analog Devices is a CMOS active filter with 8 poles and zeros, operating at -5V to 5V. It has a lowpass Bessel response type with a cutoff frequency range of 0-200 kHz. Ideal for commercial applications requiring precise signal filtering in compact designs.
LTC1068-200IG
LTC1068-200IG by Analog Devices is a 4-function active filter with switched capacitor technology. It operates at -40 to 85 °C, with a cutoff frequency range of 0.0005 kHz to 25 kHz. Ideal for industrial applications requiring resistor programmable transfer characteristics in a small outline package.
TSG8511CC
TSG8511CC by STMicroelectronics is a CMOS active filter with 16 terminals and -5V to +5V power supplies. It features a switched capacitor filter with lowpass response type and elliptic transfer characteristics. Ideal for commercial applications, it operates b/w 0 °C to 70°C temperature range.
MAX7420EUA-T
MAX7420EUA-T by Maxim Integrated is a BICMOS active filter with 5 poles and 0 zeros. It operates b/w -40 to 85°C, ideal for industrial applications. This switched capacitor filter has a lowpass response type and requires a supply voltage of 4.5-5.5V.
LTC1067-50IGN#PBF
LTC1067-50IGN#PBF by Analog Devices is a CMOS active filter with 2 functions, operating b/w -40 to 85°C. It features switched capacitor technology, with a cutoff frequency range of 0.001 kHz to 40 kHz. Ideal for industrial applications requiring resistor programmable transfer characteristics in a small outline package.
LTC1064ACN#TR
LTC1064ACN#TR by Analog Devices is a 24-terminal active filter with switched capacitor technology, offering a max cutoff frequency of 140 kHz. It operates in an industrial temperature range from -40 to 85 °C and has resistor programmable transfer characteristics. Ideal for applications requiring universal response types and precise filtering capabilities.
MAX7421CUA+
Analog Devices' MAX7421CUA+ is a BICMOS active filter with 5 poles and 0 zeros. It operates b/w 0-70 °C, has a supply voltage range of 4.5-5.5V, and features a lowpass elliptic response type. Ideal for applications requiring switched capacitor filters in small outline packages with gull wing terminals.
MAX7414CUA+
Analog Devices' MAX7414CUA+ is a CMOS active filter with 5 poles and 0 zeros, operating at a nominal voltage of 3V. With lowpass Butterworth response type and cutoff frequency range from 0.001 kHz to 15 kHz, it's ideal for applications requiring precise signal filtering in commercial temperature environments.
MAX7409EUA+T
Analog Devices' MAX7409EUA+T is a CMOS active filter with 5 poles and zeros, operating b/w -40 to 85°C. It has a lowpass Bessel response type with a cutoff frequency range of 0.001 kHz to 15 kHz. Ideal for industrial applications requiring switched capacitor filters in compact SOT-23 packages.
LTC1064-7CSW#TR
LTC1064-7CSW#TR by Analog Devices is a switched capacitor active filter with 8 poles, 0 zeros, and a cutoff frequency range up to 100 kHz. It operates in industrial temperature grades from -40 °C to 85°C, making it suitable for various lowpass filtering applications. The compact rectangular package with gull wing terminals enables surface mount installation in space-constrained designs.
BA3830S
ROHM
BA3830S by ROHM is a 5V active switched capacitor filter with 18 terminals. It operates b/w -25 to 75°C, with a max supply current of 5.2mA and power supplies ranging from 4.5-8V. Ideal for bandpass filtering applications due to its resistor programmable transfer characteristics.
MAX7409CUA+T
Analog Devices' MAX7409CUA+T is a CMOS active filter with 5 poles and zeros, operating b/w 0-70 °C. It has a lowpass Bessel response type, cutoff frequency range of 0.001 kHz to 15 kHz, and requires 4.5-5.5V supply voltage. Ideal for applications requiring switched capacitor filters in compact designs.
LTC1059CN
LTC1059CN by Analog Devices is a CMOS active filter with 14 terminals and -8V to 8V supply voltage range. It features switched capacitor technology, operates b/w -40 °C to 85°C, and has a cutoff frequency range of 0.1 kHz to 40 kHz. Ideal for industrial applications requiring universal response types like Butterworth, Bessel, or Chebyshev filters.
MF4A-50CD
The Texas Instruments MF4A-50CD is a CMOS active filter with 8 terminals and a switched capacitor filter type. It operates on +-5V power supplies, has a cutoff frequency range of 40 kHz, and features Butterworth transfer characteristics. Ideal for lowpass filtering applications in commercial temperature grades.
Linear Technology
SWITCHED CAPACITOR FILTER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Response Type: LOWPASS;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
MAX292ESA
MAX292ESA by Maxim Integrated is an active filter with 8 poles and zeros, operating at a center frequency range of 0.0001 kHz to 25 kHz. It has a lowpass response type with Bessel transfer characteristics, suitable for industrial applications requiring switched capacitor filters. The package style is small outline, making it ideal for surface mount designs with a terminal pitch of 1.27 mm.
MAX292ESA+
MAX292ESA+ by Analog Devices is an active filter with switched capacitor technology. It operates on +-5V power supplies, has 8 poles and zeros, and a lowpass Bessel response type. With a cutoff frequency range of 0.0001 kHz to 25 kHz, it is ideal for industrial applications requiring precise signal filtering in a compact small outline package.
SWITCHED CAPACITOR FILTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Response Type: LOWPASS;
SWITCHED CAPACITOR FILTER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Response Type: LOWPASS;
MAX291CPA+
MAX275BCWP+
Active Filters; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; JESD-30 Code: R-PDSO-G28;
MAX275BCWP
Active Filters; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Maximum Supply Current (Isup): 24 mA;
MAX275BCWP+ by Analog Devices is an active filter with 24mA Isup, -5.5V Vsup, and 70°C max operating temp. Ideal for applications requiring precise signal filtering in commercial-grade environments.
MAX274BEWI
MAX274BEWI by Maxim Integrated is an active filter with 30 mA Isup, -5.5 V to 5.5 V Vsup range, and 28 terminals in a small outline package. It is used in industrial applications for signal processing and noise filtering due to its wide operating temperature range of -40°C to 85°C.
MAX274BEWI+
Active Filters; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Terminal Pitch: 1.27 mm;
Active Filters; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Terminal Finish: MATTE TIN;
MAX274AEWI
MAX274AEWI by Maxim Integrated is an active filter with 30mA Isup, -5.5V to 5.5V Vsup range, and 28 terminals in a small outline package. Ideal for industrial applications requiring precise signal filtering and conditioning in a compact form factor.
MAX274AEWI+
Active Filters; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Minimum Supply Voltage (Vsup): 2.37 V;
Active Filters; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Moisture Sensitivity Level (MSL): 1;
MAX274BCWI
Active Filters; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Maximum Supply Voltage (Vsup): 5.5 V;
MAX274BCWI+
Active Filters; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Nominal Negative Supply Voltage (Vsup): -5 V;
MAX293CPA+
MAX293CPA
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved