Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Timers or RTCs; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn) - annealed; Maximum Time At Peak Reflow Temperature (s): 30; Technology: CMOS;
Median Price
$4.970
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Analog Devices Inc
1+ parts
100+ parts
$3.162
1k+ parts
$1.970
10k+ parts
$2.753
DigiKey
$3.014
-
Mouser Electronics
$5.120
$3.200
$3.010
Verical
$2.437
Digiode
$4.731
Vyrian
ACDS - Activité Composants Distribution Service
Anansix
Nova Conductors
Corohmni
$1.880
Component Stockers USA
$3.330
$2.450
$1.400
Corphita
$4.482
Ampacity Inc.
$4.550
Semicontronic
$4.436
$4.414
Microchip USA
$12.190
$12.110
$12.080
$12.040
MARBEL Systems
$73.161
$70.234
Texas Native Microelectronics
$84.093
$80.729
$78.206
Kenton Components
$100.912
$88.802
Qasali Group International
$217.969
$199.805
Continental Prestige Electronics
Kepictronics
Netroflash
Argo Parts USA
Timers & Real-Time Clocks MAX16998AAUA+T attributes and parameters. Explore more Timers & Real-Time Clocks devices from Analog Devices
JESD-609 Code:
Moisture Sensitivity Level (MSL):
Peak Reflow Temperature (C):
Technology:
Terminal Finish:
Maximum Time At Peak Reflow Temperature (s):
MAX16998AAUA+T Peripheral ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
2N7002
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LL4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
Lite-on Semiconductor
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
BAV99
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
MBR0520LT1G
Onsemi
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
BQ32000DR
Texas Instruments
BQ32000DR by Texas Instruments is a CMOS timer and real-time clock IC with I2C bus compatibility. It operates b/w -40 to 85°C, has a supply voltage of 3.3V, and comes in an 8-terminal small outline package suitable for industrial applications.
CS82C54-10Z96
Renesas Electronics
CS82C54-10Z96 by Renesas Electronics is a 16-bit timer IC with 3 timers, operating at max 10 MHz clock frequency. It has a supply voltage range of 4.5V to 5.5V and operates in commercial temperature grade from 0°C to 70°C. This chip carrier package with parallel access method is ideal for real-time clock applications.
DS3232MZ/V+
Analog Devices
DS3232MZ/V+ by Analog Devices is a CMOS TIMER & REAL TIME CLOCK with I2C interface. It operates b/w -40 to 85 °C, with supply voltage range of 2.3-4.5 V. Suitable for industrial applications due to AEC-Q100 screening level and interrupt capability.
DS1339U-33+T&R
Analog Devices' DS1339U-33+T&R is a CMOS timer/real-time clock with I2C access, 3.3V supply, and interrupt capability. It operates b/w -40 to 85°C, making it suitable for industrial applications requiring precise timekeeping in a compact square package. With a max clock frequency of 0.032 MHz, this device is ideal for systems needing accurate time tracking in a small footprint.
M48T35AV-10PC1
STMicroelectronics
STMicroelectronics M48T35AV-10PC1 is a CMOS TIMER & REAL TIME CLOCK with 28 terminals, 3.3V supply, and 0.032 MHz clock frequency. It operates b/w 0-70°C, uses parallel access method, and has PLASTIC/EPOXY package for applications requiring accurate timekeeping in various electronic devices.
M48T35AV-10MH6F
M48T35AV-10MH6F by STMicroelectronics is a CMOS timer/real-time clock with 28 terminals. It operates b/w -40 to 85°C, with a supply voltage of 3-3.6V. Suitable for industrial applications, it features parallel access and direct addressing methods in a small outline package.
PCF2129AT/2
NXP Semiconductors' PCF2129AT/2 is a CMOS timer & real-time clock with I2C access. Operating temperature range from -40 to 85 °C, suitable for industrial applications. Features include 20 terminals, 1.8-4.2 V supply voltage, and compact rectangular package design.
PCF85363ATT/AJ
NXP Semiconductors' PCF85363ATT/AJ is a CMOS timer & real-time clock with 64 RAM words, I2C access, and interrupt capability. Operating b/w -40 to 85°C, it has a max supply voltage of 5.5V and min of 0.9V. Ideal for industrial applications requiring precise timekeeping in a compact form factor.
DS1306EN
Maxim Integrated
DS1306EN by Maxim Integrated is a CMOS timer and real-time clock with a max clock frequency of 0.032 MHz. It has a small outline, thin profile package shape and can operate in industrial temperature grades. This IC is commonly used for timekeeping applications requiring precise timing and scheduling.
ISL1208IB8Z
ISL1208IB8Z by Renesas Electronics is a CMOS timer & real-time clock with I2C access, 8-bit RAM, and interrupt capability. It operates b/w -40 to 85°C, has a supply voltage range of 2.7-5.5V, and supports a clock frequency of 0.032768 MHz. Ideal for industrial applications requiring precise timekeeping in compact designs.
DS1340Z-33+
DS1340Z-33+ by Analog Devices is a CMOS TIMER & REAL TIME CLOCK with I2C interface. It operates at 3.3V, has 8 terminals, and supports up to 0.032 MHz clock frequency. Ideal for industrial applications requiring precise timekeeping in temperature range of -40 to 85 °C.
CDP68HC68T1M
CDP68HC68T1M by Renesas Electronics is a CMOS timer and real-time clock IC with 20 terminals, operating at a max frequency of 2.1 MHz. It features an on-chip data RAM width of 8 bits and can operate in industrial temperature grades from -40 to 85°C. This versatile component is suitable for applications requiring precise timing functions in various electronic systems.
PCF8583TD
NXP Semiconductors' PCF8583TD is a CMOS timer/real-time clock IC with I2C interface, 256 RAM words, and 8-bit data RAM width. It operates b/w -40 to 85°C, has a max supply voltage of 6V, and consumes only 0.2mA. Ideal for applications requiring precise timekeeping in industrial settings.
DS1672S-33+
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
DS1337S/T&R
DS1337S/T&R by Maxim Integrated is a CMOS timer/RTC with I2C access, 1.8-5.5V supply, and interrupt capability. It's used in industrial applications for timekeeping due to its small outline package and wide operating temperature range of -40 to 85°C.
PCF8583TD-T
NXP Semiconductors' PCF8583TD-T is a CMOS timer/real-time clock IC with I2C interface, 8-bit RAM, and interrupt capability. It operates b/w -40 to 85°C, with supply voltage range of 2.5-6V. Ideal for applications requiring precise timekeeping in industrial settings.
RTC-4553A
Seiko Epson
The Seiko Epson RTC-4553A is a CMOS peripheral IC with 30 RAM words, 14 terminals, and a clock frequency of 0.032 MHz. It is used as a timer and real-time clock in applications requiring low power consumption and serial data access via 3-wire method. The device operates b/w -30 to 70 °C temperature range with a supply voltage of 2.7V to 5.5V.
DS1340C-33+
DS1340C-33+ by Maxim Integrated is a CMOS TIMER & REAL TIME CLOCK with I2C access. It operates at 3.3V, has 16 terminals, and supports a clock frequency of 0.032 MHz. Ideal for industrial applications requiring precise timekeeping in the temperature range of -40 to 85°C.
PCF8523TK/1
PCF8523TK/1 by NXP Semiconductors is a CMOS timer and real-time clock IC with I2C access. It operates b/w -40 to 85°C, suitable for industrial applications. This small outline package has 8 terminals, measures 4x4mm, and supports supply voltages from 1.2V to 5.5V for precise timekeeping in various electronic devices.
DS1339C-33T&R
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
MAX16997AAUA/V+T
Timers or RTCs; Moisture Sensitivity Level (MSL): 1; Technology: CMOS; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN;
MAX16998AAUA+
TIMER, PROGRAMMABLE; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
MAX16997AAUA+
MAX16997AAUA+ by Analog Devices is a TIMER, PROGRAMMABLE IC with BICMOS technology. It operates in automotive grade temperature range (-40 to 125 °C) and supports supply voltage from 5V to 40V. This small outline package with dual terminals is ideal for automotive applications requiring precise timing functions.
MAX16998DAUA/V+T
Timers or RTCs; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 30; Technology: CMOS;
Timers or RTCs; Technology: CMOS; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 30;
MAX16998DAUA+T
Timers or RTCs; Terminal Finish: MATTE TIN; Technology: CMOS; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1;
Timers or RTCs; Terminal Finish: Matte Tin (Sn) - annealed; Technology: CMOS; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1;
MAX16998DAUA/V+
MAX16998AAUA/V+
MAX16998AAUA/V+ by Analog Devices is an automotive timer IC with a supply voltage range of 5-40V. It features BICMOS technology, operates b/w -40 to 125°C, and has a small outline package with dual terminals. Ideal for applications requiring programmable timers in automotive systems.
MAX16998AAUA+T
Timers or RTCs; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 30; Technology: CMOS; JESD-609 Code: e3; Peak Reflow Temperature (C): 260;
MAX16998AAUA/V+T
Timers or RTCs; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Technology: CMOS; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 30;
Timers or RTCs; Technology: CMOS; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN;
MAX16997AAUA+T
Timers or RTCs; No. of Terminals: 8; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Package Body Material: PLASTIC/EPOXY;
MAX16998DAUA+
MAX16998BAUA+T
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved