Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LTC6908HS6-1#WTRPBF by Analog Devices is a CMOS XO Clock Oscillator with 10MHz frequency, 40% stability, and AEC-Q100 screening. Ideal for automotive applications due to its small size (2.9mm x 1.75mm x 1.0mm) and wide operating temperature range (-40°C to 125°C).
Median Price
$4.770
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Analog Devices Inc
1+ parts
$5.410
100+ parts
-
1k+ parts
$3.840
10k+ parts
$4.175
Verical
$4.131
Vyrian
Digiode
Nova Conductors
Aztec Data Supply Inc.
$0.700
Advanced Electronics
$1.568
$1.489
Parana Technologies
$2.047
$1.904
Corohmni
$2.184
IDEA Electronic Components Group
$2.201
$2.091
DigiPath Technology Company
$3.434
$3.296
Semicontronic
$4.000
$3.900
$3.880
Ampacity Inc.
$4.060
Futuretech Components
RC Electronics
Argo Parts USA
Component Stockers USA
Continental Prestige Electronics
Corphita
Bastille Electronics
The use of plastic material ensures lightweight and durable construction, making it suitable for various applications.
The high frequency stability of 40% ensures accurate and reliable timekeeping, making it ideal for precision applications.
With a maximum supply voltage of 5.5V, this clock oscillator can operate efficiently in a wide range of electronic systems.
The AEC-Q100 screening level certifies the quality and reliability of the product, making it suitable for automotive applications.
The specified output load ensures compatibility with various circuit designs, enhancing the versatility of the clock oscillator.
The low maximum supply current of 1.7mA helps in reducing power consumption, making it energy-efficient.
Being a CMOS oscillator, it offers low power consumption, high noise immunity, and fast start-up time, making it a reliable choice.
The 6 terminals provide connectivity options and flexibility in circuit integration, allowing for easy installation and usage.
The compact size of the clock oscillator enables space-efficient PCB layout and integration in small electronic devices.
With a minimum supply voltage of 2.7V, the clock oscillator can function smoothly even in low power scenarios.
The wide operating temperature range of up to 125°C ensures reliable performance in harsh environmental conditions.
The clock oscillator can operate effectively in extreme cold temperatures as low as -40°C, expanding its usability.
The matte tin finish provides corrosion resistance and ensures secure solder connections for stable performance.
The nominal operating frequency of 10MHz offers high-speed signal processing capabilities, suitable for various applications.
The specified symmetry ensures balanced output signals, reducing signal distortion and enhancing overall performance.
The high maximum output low current of 1.2A allows for driving external loads with ease, expanding the application range.
The minimum operating frequency of 0.05MHz enables low-frequency operation, making it suitable for diverse timing applications.
The surface mount feature simplifies the installation process and ensures secure placement on the PCB, enhancing reliability.
XO Clock Oscillators LTC6908HS6-1#WTRPBF attributes and parameters. Explore more XO Clock Oscillators devices from Analog Devices
Frequency Adjustment (Mechanical):
Frequency Stability:
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Minimum Operating Frequency:
Nominal Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Output Load:
Maximum Output Low Current:
Package Body Material:
Physical Dimension:
Screening Level:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Maximum Symmetry (%):
Terminal Finish:
LTC6908HS6-1#WTRPBF Oscillators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
SMBJ18CA
Yageo
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
STM32F401CDY6TR
STMicroelectronics
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
BAV99
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Tesla Elektronicke Soucastky
MBR0520LT1
Onsemi
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
261
Deltrol Controls
Other Relays;
1N4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Infinex
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
General Semiconductor
Diotec Semiconductor Ag
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
Vishay Intertechnology
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
RC0603JR-070RL
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
540BAA125M000BBGR
Silicon Labs
Silicon Labs' 540BAA125M000BBGR is a LVDS XO Clock Oscillator with 20% frequency stability, operating at 125 MHz. It has a max supply voltage of 3.465 V and output load of 100 ohms. Ideal for applications requiring precise timing in environments ranging from -40°C to 85°C.
570BAB001614DGR
Skyworks Solutions
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Temperature: 85 Cel;
LTC6995MPS6-2#TRMPBF
Linear Technology
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 22000 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Temperature: 125 Cel;
CB3-5I-20M0000
Cts
CB3-5I-20M0000 by Cts is a 20 MHz XO Clock Oscillator with 25% Frequency Stability, HCMOS/TTL type. It operates at 4.5-5.5V, with 50 pF load and 25 mA supply current. Ideal for applications requiring precise timing in temperature range of -40 to 85°C.
ASDK2-32.768KHZ-L-R-T3
Abracon
Abracon's ASDK2-32.768KHZ-L-R-T3 is a ceramic XO Clock Oscillator with 25% frequency stability, 1.8V nominal voltage, and CMOS oscillator type. Ideal for applications requiring precise timing such as IoT devices, wearables, and communication equipment due to its compact size and low power consumption.
540BAA150M000BAGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Temperature: 85 Cel;
AK2DAF1-125.0000T3
Abracon's AK2DAF1-125.0000T3 is a 125 MHz LVDS XO Clock Oscillator with 30% frequency stability, suitable for applications requiring precise timing. Operating at 3.3V, it offers a max rise time of 0.5 ms and compact dimensions of 2.5mm x 2.0mm x 1.0mm for surface mount installations in temperature-sensitive environments.
510FBA156M250BAG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; JESD-609 Code: e4;
SIT8208AI-2F-33E-25.000000X
Sitime
SIT8208AI-2F-33E-25.000000X by Sitime is a 25 MHz LVCMOS XO Clock Oscillator with 10% frequency stability, suitable for applications requiring precise timing. It operates at a nominal voltage of 3.3V and has a compact size of 3.2mm x 2.5mm x 0.75mm, making it ideal for space-constrained designs in various electronic devices.
ASEMPLV-148.500MHZ-LR-T
Abracon's ASEMPLV-148.500MHZ-LR-T is a 148.5MHz LVDS XO Clock Oscillator with CMOS technology, suitable for applications requiring high-frequency precision. With a compact size of 3.2mm x 2.5mm x 0.85mm and operating temperature range from -40°C to 85°C, it offers stable performance in various environments. The oscillator operates at voltages of 2.5/3.3V, drawing a max supply current of 32mA for reliable functionality.
LTC6908IDCB-1#TRPBF
Analog Devices
LTC6908IDCB-1#TRPBF by Analog Devices is a CMOS XO Clock Oscillator with 40% Frequency Stability, 5.5V Max Supply Voltage, and 5pF Output Load. Ideal for applications requiring precise timing such as communication systems, industrial automation, and test equipment due to its compact size and wide operating temperature range of -40°C to 85°C.
AX7DBF1-125.0000C
Abracon's AX7DBF1-125.0000C is a 125 MHz LVDS XO Clock Oscillator with 25% frequency stability, suitable for applications requiring precise timing. Operating at a voltage range of 2.25V to 2.75V, it offers fast rise and fall times of 0.35 ms and 0.35 ns respectively, making it ideal for high-speed digital circuits in various electronic devices. With compact dimensions of 7.0mm x 5.0mm x 1.8mm and surface mount feature, this oscillator can be easily integrated into space-constrained PCB designs while ensuring reliable performance across temperatures ranging from -40°C to 85°C.
LTC6995CS6-2#TRPBF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 22000 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Current: .17 mA;
SIT1532AI-J4-DCC-32.768E
SIT1532AI-J4-DCC-32.768E by Sitime is a PLASTIC/EPOXY XO Clock Oscillator with a frequency stability of 100%. It operates at a max supply voltage of 3.63V and is suitable for applications requiring LVCMOS oscillators in surface mount packages.
SG-8018CA40.0000M-TJHPA3
Seiko Epson
SG-8018CA40.0000M-TJHPA3 by Seiko Epson is a 40 MHz XO Clock Oscillator with CMOS type, 4 terminals, and 15 pF output load. It operates b/w -40 to 105 °C and has a rise time of 6 ms. Ideal for applications requiring precise timing in electronic devices.
CB3LV-3I-30M0000
CB3LV-3I-30M0000 by Cts is a ceramic XO Clock Oscillator with 30 MHz frequency, 50% stability, and HCMOS/TTL type. Ideal for applications requiring precise timing in electronics with a supply voltage of 3.3V and operating temperature range from -40 to 85°C.
FXO-HC736R-10
Renesas Electronics
Renesas Electronics FXO-HC736R-10 is a 10 MHz HCMOS XO Clock Oscillator with 25% frequency stability. Operating voltage range of 3.135V to 3.465V, suitable for applications requiring precise timing in temperature-sensitive environments. Features gold terminal finish and compact dimensions of 7.5mm x 5.2mm x 1.4mm for surface mount installations.
CB3-3C-40.0000T
CB3-3C-40.0000T by Cts is a 40 MHz XO Clock Oscillator with HCMOS/TTL type, 50% Frequency Stability, and 5.5V Max Supply Voltage. Ideal for applications requiring precise timing in electronic devices due to its compact size and high operating temperature range of -20°C to 70°C.
SIT1532AC-J5-DCC-32.768Y
SIT1532AC-J5-DCC-32.768Y by Sitime is a XO Clock Oscillator with 75% Frequency Stability, 3.63V Max Supply Voltage, and 15pF Output Load. Ideal for applications requiring LVCMOS oscillators in compact dimensions like IoT devices and wearables due to its small size of 1.54mm x 0.84mm x 0.6mm and low supply current of 0.0013mA.
LTC6903CMS8#PBF
LTC6903CMS8#PBF by Analog Devices is a CMOS XO Clock Oscillator with 5.5V max supply voltage, 5pF output load, and 68MHz max operating frequency. Ideal for applications requiring precise timing in compact designs like IoT devices and communication systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
LTC6995IS6-1#TRMPBF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 22000 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Voltage: 5.5 V;
LTC6995CS6-1#TRMPBF
LTC6995CS6-2#TRMPBF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 22000 %; Frequency Adjustment (Mechanical): NO; Output Load: 5 pF;
LTC6995IS6-2#TRMPBF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 22000 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Temperature: -40 Cel;
LTC6995HS6-2#TRMPBF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 22000 %; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 2.25 V;
LTC6995HS6-1#TRMPBF
LTC6995MPS6-1#TRMPBF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 22000 %; Frequency Adjustment (Mechanical): NO; Terminal Finish: MATTE TIN;
LTC6991HS6#TRMPBF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Adjustment (Mechanical): NO; Minimum Operating Temperature: -40 Cel; Maximum Fall Time: 2.4 ns;
LTC6991HS6#TRMPBF by Analog Devices is a CMOS XO Clock Oscillator with 5.5V max supply voltage, 5 KOHMS output load, and 2.7ms rise time. Ideal for applications requiring precise timing control in compact designs due to its small form factor of 2.9mm x 1.5mm x 1.0mm and surface mounting feature.
LTC6995MPS6-1#TRPBF
LTC6908HS6-1#TRMPBF
LTC6908HS6-1#TRMPBF by Analog Devices is a CMOS XO Clock Oscillator with 40% frequency stability, operating from 0.05 MHz to 10 MHz. It has a max supply voltage of 5.5 V and output load of 5 pF, making it suitable for applications requiring precise timing in a compact form factor.
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Frequency Stability: 40 %; Frequency Adjustment (Mechanical): NO; JESD-609 Code: e3;
LTC6908IS6-1#TRMPBF
LTC6908IS6-1#TRMPBF by Analog Devices is a CMOS XO Clock Oscillator with 40% Frequency Stability, 5.5V Max Supply Voltage, and 5pF Output Load. Ideal for applications requiring precise timing in a compact form factor such as IoT devices, wearables, and communication systems.
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Frequency Stability: 40 %; Frequency Adjustment (Mechanical): NO; Physical Dimension: 2.9mm x 1.5mm x 1.0mm;
LTC6995CS6-1#TRPBF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 22000 %; Frequency Adjustment (Mechanical): NO; Maximum Fall Time: 2.4 ns;
LTC6991CS6#TRMPBF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Adjustment (Mechanical): NO; Maximum Rise Time: 2.7 ms; Terminal Finish: Matte Tin (Sn);
LTC6991CS6#TRMPBF by Analog Devices is a CMOS XO Clock Oscillator with 5.5V max supply voltage, 5pF output load, and 2.7ms rise time. Ideal for applications requiring precise timing in compact designs with surface mounting feature.
LTC6908HS6-1#TRPBF
LTC6908HS6-1#TRPBF by Analog Devices is a CMOS XO Clock Oscillator with 40% frequency stability, operating at 0.05-10 MHz range. It has a compact size of 2.9mm x 1.5mm x 1.0mm and operates b/w -40 to 125°C, making it suitable for various electronic applications requiring precise timing control in limited space environments.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved