Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LTC3417AEDHC-2#PBF by Analog Devices is a switching regulator with 16 terminals and a small outline package. It operates at temperatures b/w 0°C to 85°C and has a max switching frequency of 4000 kHz. This IC is commonly used as a dual switching controller in various applications.
Median Price
$9.260
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Rochester
1+ parts
$3.410
100+ parts
$3.340
1k+ parts
$3.270
10k+ parts
-
Chip1Stop
$7.780
$5.550
Mouser Electronics
$6.000
$5.620
$5.400
DigiKey
$6.235
$5.690
$5.557
Newark
$9.540
$6.760
$5.990
Analog Devices Inc
$9.710
$4.050
Farnell
$10.380
$6.680
$6.240
Element14
$16.200
$8.380
$7.200
Verical
$4.354
Arrow
$5.960
$5.145
Digiode
$3.240
DF Sales Co.
$4.000
Nova Conductors
$5.530
Chip Stock
Bristol Electronics
Inventory MP
Semi Source
Anansix
SPM Sales
Vyrian
Prism Electronics
One Stop Electronics
$2.900
Ampacity Inc.
Semicontronic
$2.828
$2.813
Corphita
$3.069
Corohmni
$3.940
Netroflash
Continental Prestige Electronics
$7.460
$5.580
$4.230
MARBEL Systems
$9.160
Texas Native Microelectronics
$10.529
$10.108
$9.792
$9.266
Kenton Components
$12.635
$11.119
Parana Technologies
$13.533
$12.586
IDEA Electronic Components Group
$14.552
$13.824
DigiPath Technology Company
$22.701
$21.793
Qasali Group International
$28.428
$26.438
$25.017
Perfect Parts
Authorized Procurement Solutions
Argo Parts USA
A-Z Elektronik GmbH
The use of plastic/epoxy for the package body material ensures durability and protection for the internal components, making this product suitable for rugged environments.
With surface mount capability, this product offers easy and efficient installation, saving time and effort during assembly.
This product incorporates a single function, simplifying the design and reducing complexity, resulting in improved reliability and ease of use.
The rectangular package shape allows for efficient space utilization, making it ideal for applications where board space is limited.
With 16 terminals, this product provides ample connectivity options, allowing for versatile integration into various circuit designs.
The small outline, heat sink/slug, and very thin profile package style enables efficient heat dissipation and compact design, making it suitable for space-constrained applications with demanding thermal requirements.
With a maximum operating temperature of 85°C, this product exhibits excellent heat resistance, ensuring reliable performance even in high-temperature environments.
The current-mode control mode employed in this product offers precise regulation and enhanced stability, making it an excellent choice for applications requiring accurate current control.
The ability to operate at temperatures as low as 0°C allows this product to function reliably in cold environments or during startup, providing versatility in various operating conditions.
The matte tin terminal finish provides excellent solderability and corrosion resistance, ensuring reliable electrical connections and durability over time.
The dual terminal position allows for flexible PCB layout options, optimizing the space usage and facilitating easy integration with other components.
The extremely low maximum seated height of only 0.8 mm facilitates compact system design and contributes to overall space savings.
With a width of 3 mm, this product offers a small footprint, making it suitable for applications where board space is at a premium.
Featuring a dual switching controller, this product enables efficient power conversion and enhances system performance by allowing for precise control of multiple power channels.
The nominal input voltage of 3.6 V makes this product compatible with a wide range of power sources, offering flexibility in power supply configurations.
The maximum time at peak reflow temperature of 30 seconds ensures safe handling during assembly processes, preventing damage and guaranteeing high product reliability.
With a peak reflow temperature of 260°C, this product can withstand high-temperature soldering processes, allowing for efficient and reliable assembly.
The compact length of 5 mm makes this product suitable for space-constrained applications, where efficient use of board space is essential.
With a high maximum switching frequency of 4000 kHz, this product provides fast and efficient power conversion, making it ideal for applications requiring rapid response and high-frequency operation.
The no-lead terminal form ensures compliance with environmental regulations, making this product a sustainable choice while maintaining high electrical performance.
The small terminal pitch of 0.5 mm allows for tighter pin spacing, enabling high-density PCB designs and miniaturization of electronic systems.
With a moisture sensitivity level of 1, this product can be exposed to ambient moisture for an extended period without affecting its functionality, providing flexibility during storage and handling.
The ability to operate at a minimum input voltage of 2.25 V ensures compatibility with low-voltage power sources, allowing for versatile applications across various systems.
With a maximum input voltage of 5.5 V, this product can handle higher voltage inputs, providing a wide operating range and accommodating different power supply configurations.
Switching Regulators & Controllers LTC3417AEDHC-2#PBF attributes and parameters. Explore more Switching Regulators & Controllers devices from Analog Devices
Other IC type:
Control Mode:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
LTC3417AEDHC-2#PBF Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
SMBJ18CA
Weitron Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Asi Semiconductor
Tesla Elektronicke Soucastky
New England Semiconductor
Digitron Semiconductors
TM4C1294NCPDTI3
Texas Instruments
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
LM358AN
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
08055C104KAT2A
KYOCERA AVX
08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
BAV99
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555D
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NDT2955
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
Frontier Electronics
LM5008ASDX/NOPB
LM5008ASDX/NOPB by Texas Instruments is a switching regulator with a max output voltage of 75V and max output current of 0.35A. Operating in temperatures from -40 to 125°C, it's ideal for automotive applications due to its small outline package and wide input voltage range of 6-95V. With a max switching frequency of 600kHz, this device is suitable for various power management needs.
AOZ1282CI-1
Alpha & Omega Semiconductor
AOZ1282CI-1 by Alpha & Omega Semiconductor is a switching regulator with 6 terminals, operating b/w -40 to 85°C. It has a buck switcher configuration, supporting input voltages from 4.5V to 36V and output voltage up to 30.6V at a max current of 0.6A. Ideal for applications requiring low profile, high efficiency power management solutions.
LM2675MX-12/NOPB
LM2675MX-12/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 12V nominal output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its DMOS technology and wide temperature range (-40 to 125°C).
LMZ31520RLGT
LMZ31520RLGT by Texas Instruments is a 72-terminal switching regulator with a max output current of 20A and a max operating temperature of 85°C. Ideal for industrial applications, it operates in voltage-mode control with a buck switcher configuration, offering an output voltage range from 0.6V to 3.6V.
LM5022MMX/NOPB
LM5022MMX/NOPB by Texas Instruments is a switching controller with current-mode control technique, operating at -40 to 125°C. It offers a wide input voltage range of 6-60V and can handle output voltages up to 300V. Ideal for automotive applications due to its compact size, high switching frequency of 2200 kHz, and buck-boost switcher configuration.
TPS54334DDAR
TPS54334DDAR by Texas Instruments is a switching regulator with 8 terminals, operating temperature range of -40 to 85°C, and output current up to 3A. It features pulse width modulation control mode, buck switcher configuration, and supports input voltages from 4.2V to 28V. Ideal for industrial applications requiring efficient power management in compact spaces.
LM2672M-12/NOPB
LM2672M-12/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 12V nominal output voltage, and 400kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact small outline package design.
NCP1403SNT1G
Onsemi
NCP1403SNT1G by Onsemi is a voltage-mode switching regulator with a max output current of 0.6A and a boost switcher configuration. Operating temperature ranges from -40 to 85°C, making it suitable for industrial applications. This small outline IC has 5 terminals, matte tin finish, and supports a max input voltage of 5.5V at a frequency of up to 300kHz.
LM2576T-ADJ
LM2576T-ADJ by Texas Instruments is a switching regulator with max output voltage of 37V and max output current of 7.5A. It operates b/w -40 to 125°C, suitable for automotive applications. Control mode is voltage-mode PWM with a switching frequency of up to 63kHz, ideal for buck configuration.
TPS5410DG4
TPS5410DG4 by Texas Instruments is a voltage-mode switching regulator with a max output current of 1A and a wide input voltage range from 5.5V to 36V. It operates at temperatures ranging from -40°C to 125°C, making it suitable for automotive applications. This small outline IC features pulse width modulation control technique and buck switcher configuration, ideal for compact designs requiring efficient power management.
LMR54406DBVR
LMR54406DBVR by Texas Instruments is a small outline switching regulator with 6 terminals, operating b/w -40 to 125°C. It features a buck switcher configuration, pulse frequency modulation control technique, and can handle up to 0.6A output current. Ideal for applications requiring efficient voltage regulation in compact spaces.
LM2575T-5.0/NOPB
LM2575T-5.0/NOPB by Texas Instruments is a switching regulator with a max output current of 1A and a max operating temperature of 125°C. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
TPS63000DRCRG4
TPS63000DRCRG4 by Texas Instruments is a switching regulator with a max output current of 2A and max operating temp of 85°C. Ideal for industrial applications, it operates in buck-boost mode with a control technique of PWM, suitable for voltages ranging from 1.8V to 5.5V.
LM5156DSSR
LM5156DSSR by Texas Instruments is a switching controller with a 12V nominal input voltage and 300V max output voltage. Operating at -40 to 125°C, it uses pulse width modulation control technique for buck-boost configuration. Ideal for automotive applications due to its small outline package style and high max switching frequency of 500 kHz.
LM25116MHX/NOPB
LM25116MHX/NOPB by Texas Instruments is a current-mode switching controller with a max output current of 20A and a max switching frequency of 1MHz. It operates in automotive-grade temperatures (-40 to 125°C) and is suitable for applications requiring high efficiency power conversion, such as automotive electronics and industrial automation systems.
LM5163DDAR
LM5163DDAR by Texas Instruments is a small outline switching regulator with a max output voltage of 90V and max output current of 0.5A. Ideal for automotive applications, it operates in temperatures ranging from -40 to 150°C, making it suitable for various electronic devices requiring efficient power management.
LT8645SEV#PBF
Analog Devices
Analog Devices' LT8645SEV#PBF is a 32-terminal switching regulator with max output current of 8A and max input voltage of 65V. Ideal for applications requiring high efficiency, it operates in buck configuration with PWM control mode at a max frequency of 2200kHz. Suitable for surface mount assembly, this chip carrier package has a compact size making it versatile for various electronic designs.
MC33063ADRJR
MC33063ADRJR by Texas Instruments is a switching regulator with VOLTAGE-MODE control, operating at -40 to 85 °C. It has a max output voltage of 40V and can handle up to 1.5A output current. Ideal for industrial applications requiring efficient buck-boost configurations in compact designs.
LM5008MMX/NOPB
LM5008MMX/NOPB by Texas Instruments is a switching regulator with a max output voltage of 75V and max output current of 0.61A. Ideal for automotive applications, it operates b/w -40 to 125°C, featuring hysteric current mode control technique and buck switcher configuration.
TPS62175DQCR
TPS62175DQCR by Texas Instruments is a switching regulator with a max output current of 0.5A and a max input voltage of 28V. It is commonly used in industrial applications due to its temperature grade and small package size.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
XRP6668IDBTR-F
Maxlinear Inc
LTC3350EUHF#PBF
Linear Technology
SWITCHED CAPACITOR CONVERTER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 38; Package Code: HVQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
LTC3892EUH-2#PBF
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
LTC3892EUH-2#PBF by Analog Devices is a current-mode switching controller with buck configuration. It operates in automotive-grade temperature range from -40 to 125°C, suitable for various applications. With a wide input voltage range of 4.5V to 60V, it delivers a nominal output voltage of 3.3V efficiently.
LTC3646EMSE#PBF
LTC3646EMSE#PBF by Analog Devices is a current-mode switching regulator with 16 terminals, operating b/w -40 to 85°C. It has a buck switcher configuration, accepting input voltages from 4-40V and providing a stable output of 5V. This compact device in small outline package is ideal for industrial applications requiring efficient power management.
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: HTSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LTC3646EDE-1#PBF
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 14; Package Code: HVSON; Package Shape: RECTANGULAR; Surface Mount: YES;
LTC3646EDE-1#PBF by Analog Devices is a current-mode switching regulator with 14 terminals, operating b/w -40 to 85°C. It has a buck switcher configuration, supporting input voltages from 4V to 40V and output voltage of 5V. Ideal for industrial applications requiring efficient power management in compact spaces.
LTC3646IDE-1#PBF
LTC3646IDE-1#PBF by Analog Devices is a current-mode switching regulator with 14 terminals, operating b/w -40 to 125°C. It has a buck switcher configuration, supporting input voltages from 4V to 40V and output voltage of 5V. Ideal for automotive applications due to its compact size and high max switching frequency of 3 kHz.
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 14; Package Code: HVSON; Package Shape: RECTANGULAR; Surface Mount: YES;
LTC3646EDE#PBF
LTC3646IDE#PBF
LTC3646IDE#PBF by Analog Devices is a current-mode switching regulator with a buck configuration. It operates b/w -40 to 125 °C and supports input voltages from 4V to 40V, providing a stable output of 5V. This small outline IC is ideal for automotive applications due to its high temperature grade and compact design.
LTC3779EFE#PBF
LTC3779EFE#PBF by Analog Devices is a current-mode switching controller with a buck-boost switcher config. It operates b/w 0 to 85 °C and supports input voltage range of 4.5V to 150V. Ideal for applications requiring pulse width modulation control technique in compact designs.
SWITCHING CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 38; Package Code: HTSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LTC3646HDE-1#PBF
LTC3646HDE-1#PBF by Analog Devices is a current-mode switching regulator with 14 terminals, operating from -40 to 150°C. It has a buck configuration, supporting input voltages from 4V to 40V and output at 5V. Ideal for automotive applications due to its small size (4x3mm) and high max switching frequency of 3kHz.
LTC3114IFE-1#PBF
LTC3114IFE-1#PBF by Analog Devices is a switching regulator with 2.3A output current, 1400kHz max switching frequency, and 24V nominal input voltage. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design with small outline package style.
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: HTSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LTC3646EMSE-1#PBF
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved