Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LTC1844ES5-3.3#TRMPBF by Analog Devices is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max dropout voltage of 0.15V. It operates in temperatures ranging from 0 to 70°C, making it suitable for various applications requiring stable voltage regulation in compact spaces like portable electronic devices or IoT sensors.
Median Price
$4.724
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$4.030
100+ parts
$3.140
1k+ parts
$3.120
10k+ parts
-
Arrow
$4.747
$3.048
$2.797
DigiKey
$5.010
$3.189
$2.861
$2.754
Mouser Electronics
$3.190
$2.820
$2.750
Newark
$5.160
$3.290
$3.230
Analog Devices Inc
$5.390
$2.493
$1.975
Farnell
$3.700
$3.150
Element14
$4.700
$4.110
Verical
$2.026
Rochester
$2.570
$2.300
$2.160
Nova Conductors
Digiode
$3.293
Component Electronics Inc.
$7.690
$5.770
$5.000
Chip Stock
Anansix
Sensible Micro Corp
$2.389
$2.205
Vyrian
PC Components Company LLC
Bristol Electronics
Component Stockers USA
$1.690
Ampacity Inc.
$1.720
Semicontronic
$1.677
$1.668
Corohmni
$2.045
Advanced Electronics
$2.106
$2.001
Argo Parts USA
Netroflash
$2.117
Corphita
$3.119
Vigor
Parana Technologies
$6.358
$5.913
IDEA Electronic Components Group
$6.837
$6.495
Aztec Data Supply Inc.
$7.847
MARBEL Systems
$8.563
Texas Native Microelectronics
$9.842
$9.448
$9.153
$8.661
DigiPath Technology Company
$10.666
$10.239
Kenton Components
$11.810
$10.393
Microchip USA
$16.470
$16.370
$16.320
$16.270
Qasali Group International
$26.573
$24.713
$23.385
Metaverse IC Inc.
QUARKTWIN TECHNOLOGY LTD
Perfect Parts
Lixinc
Authorized Procurement Solutions
Continental Prestige Electronics
$2.500
$1.700
A-Z Elektronik GmbH
This material provides durability and protection, making the regulator suitable for various environments and applications.
Low dropout voltage ensures efficient power conversion and minimal power loss, making the regulator energy-efficient.
The surface-mount design allows for easy and convenient installation on circuit boards, saving space and simplifying assembly.
With a high maximum operating temperature, the regulator can function reliably even in demanding conditions.
The stable output voltage of 3.3V ensures consistent power delivery to connected devices, making it ideal for sensitive electronics.
The tight voltage tolerance ensures precise regulation and reliable performance, meeting the requirements of critical applications.
The small terminal pitch allows for compact and space-saving designs, making the regulator suitable for miniaturized electronic devices.
With a maximum output current of 0.15A, the regulator can power a range of components effectively, offering versatility in design.
The high input voltage capability allows the regulator to handle a wide range of input voltages, enhancing its compatibility with different power sources.
Fixed Regulators - Positive Single Output LDO LTC1844ES5-3.3#TRMPBF attributes and parameters. Explore more Fixed Regulators - Positive Single Output LDO devices from Analog Devices
Maximum Dropout Voltage-1:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
LTC1844ES5-3.3#TRMPBF Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
LM358M
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SMBJ18CA
Diodes Incorporated
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
FDV304P
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
SS14
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
LM358N
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
Swampscott Electronics
STM32H743ZIT6
STMicroelectronics
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
SPX5205M5-L-3.3/TR
Sipex
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Seated Height: 1.45 mm; Package Body Material: PLASTIC/EPOXY;
LM2940IMP-5.0/NOPB
Texas Instruments
LM2940IMP-5.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 1A. It operates in temperatures ranging from -40°C to 85°C, making it suitable for various applications requiring stable voltage regulation in compact designs. With a small outline package style and surface mount capability, it is ideal for space-constrained electronic devices.
MIC5365-3.3YC5-TR
MIC5365-3.3YC5-TR by Microchip Technology is a fixed positive single output LDO regulator with a max output current of 0.15 A and a dropout voltage of 0.31 V. It is commonly used in applications requiring stable voltage regulation, such as power management in electronic devices.
TPS73733DCQ
TPS73733DCQ by Texas Instruments is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 3.3V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices. The package style is small outline, making it ideal for surface mount assembly processes.
LM2936M-3.3/NOPB
LM2936M-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with 3.3V nominal output voltage, 0.05A max output current, and 60V max input voltage. Ideal for applications requiring low dropout voltage and precise regulation in compact designs.
LT1764AEQ-3.3#TRPBF
Linear Technology
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 3.54 %;
LD1117AS33TR
STMicroelectronics LD1117AS33TR is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 1A max output current. It has a small outline package style, matte tin terminal finish, and operates b/w 0°C to 125°C. Ideal for applications requiring low dropout voltage and precise voltage regulation in compact designs.
LM2936HVMA-5.0
LM2936HVMA-5.0 by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.4V, suitable for applications requiring stable voltage supply in a compact package. It operates within a wide temperature range from -40°C to 150°C, making it ideal for various electronic devices where precise voltage regulation is crucial.
TPS73033DBVT
TPS73033DBVT by Texas Instruments is a Fixed Positive Single Output LDO Regulator with 3.3V Nominal Output Voltage, 0.2A Max Output Current, and 2% Max Voltage Tolerance. It is ideal for applications requiring stable voltage regulation in a compact form factor, such as portable electronics and IoT devices.
TPS71733DCKR
TPS71733DCKR by Texas Instruments is a fixed positive single output LDO regulator with a max dropout voltage of 0.3V and an operating temperature range of -40°C to 125°C. It is commonly used in applications that require a stable and regulated power supply, such as consumer electronics and industrial equipment.
NCP1117LPST33T3G
NCP1117LPST33T3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
LT1962EMS8-3.3#TRPBF
Analog Devices
Analog Devices' LT1962EMS8-3.3#TRPBF is a fixed positive single output LDO regulator with a nominal output voltage of 3.3 V and max dropout voltage of 0.43 V, suitable for applications requiring stable voltage regulation in compact spaces. With a max output current of 0.3 A and operating temperature range from -40 to 125°C, it is ideal for surface mount designs where space and efficiency are crucial factors.
ADP7118ARDZ-3.3
ADP7118ARDZ-3.3 by Analog Devices is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.2A. It has a small outline package style, operates in temperatures ranging from -40 to 125°C, and is suitable for applications requiring precise voltage regulation in compact electronic devices.
MCP1702T-3302E/CBVAO
MCP1702T-3302E/CBVAO by Microchip is a 3.3V Fixed Positive Single Output LDO Regulator with 0.25A max output current and 3% voltage tolerance. Ideal for applications requiring low dropout voltage, it operates in temperatures ranging from -40 to 125°C, making it suitable for various electronic devices.
TC1262-3.3VDB
Telcom Semiconductor
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 6.5 V; Maximum Voltage Tolerance: 2.5 %; No. of Functions: 1;
MCP1826T-3302E/DC
MCP1826T-3302E/DC by Microchip is a fixed positive single output LDO regulator with 3.3V nominal output voltage, 1A max output current, and 0.4V max dropout voltage. It is ideal for applications requiring stable power supply in compact spaces due to its small outline package style and surface mount capability.
LP2950CDT-3.3
LP2950CDT-3.3 by Texas Instruments is a fixed positive single output LDO regulator with 3.3V nominal output voltage, 0.1A max output current, and 2.4% max voltage tolerance. It is ideal for applications requiring stable power supply in a compact package, such as consumer electronics and industrial control systems.
TPS79333DBVREP
TPS79333DBVREP by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.2A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, low profile, shrink pitch, ideal for surface mount assembly.
LF33ABDT-TR
STMicroelectronics LF33ABDT-TR is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.5A max output current. It has a small outline package style, operates at -40 to 125 °C, and is ideal for applications requiring low dropout voltage and precise voltage regulation.
LT1763CS8-2.5#TRPBF
Analog Devices' LT1763CS8-2.5#TRPBF is a fixed positive single output LDO regulator with a nominal output voltage of 2.5V and max output current of 0.5A. It features a small outline package style, matte tin terminal finish, and operates within an input voltage range of 1.8V to 20V. Ideal for applications requiring precise voltage regulation in compact electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
LTC1844ES5-3.3#TRMPBF
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: VSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 1.7 %; Terminal Pitch: .95 mm;
LTC1844ES5-3.3#PBF
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: VSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 1.7 %; Maximum Input Voltage: 6.5 V;
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: VSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 7 V; Maximum Voltage Tolerance: 1.75 %;
LTC1844ES5-1.8#TRMPBF
LTC1844ES5-1.8#TRMPBF by Analog Devices is a fixed positive single output LDO regulator with a max dropout voltage of 0.3V and a max output current of 0.15A. It is commonly used in applications requiring stable voltage regulation, such as portable electronic devices and battery-powered systems.
LTC1844ES5-3.3#TRPBF
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: VSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 1.7 %; Nominal Output Voltage-1: 3.3 V;
LTC1844ES5-3.3#TR
LTC1844ES5-3.3#TR by Analog Devices is a Fixed Positive Single Output LDO Regulator with 3.3V nominal output voltage, 0.15A max output current, and 1.7% voltage tolerance. It is ideal for applications requiring a compact regulator with low dropout voltage, such as portable electronic devices and IoT sensors.
LTC1844ES5-2.5#TRM
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: VSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 1.7 %; Surface Mount: YES;
LTC1844ES5-2.5#TR
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: VSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 1.7 %; Package Body Material: PLASTIC/EPOXY;
LTC1844ES5-1.8#PBF
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: VSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 1.8 %; Moisture Sensitivity Level (MSL): 1;
LTC1844ES5-1.5#TRM
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: VSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2.5 %; No. of Functions: 1;
LTC1844ES5-2.5#TRMPBF
LTC1844ES5-2.5#TRMPBF by Analog Devices is a fixed positive single output LDO regulator with a nominal output voltage of 2.5V and max dropout voltage of 0.2V, suitable for applications requiring stable low-voltage power supplies in compact designs. It features a small outline package style with gull wing terminals, making it ideal for surface mount applications where space is limited. Operating temperature ranges from 0°C to 70°C, ensuring reliable performance in various environments.
LTC1844ES5-1.8#TR
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: VSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 1.8 %; Peak Reflow Temperature (C): 235;
LTC1844ES5-2.5#TRPBF
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: VSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 1.7 %; JESD-609 Code: e3;
LTC1844ES5-1.5#TRMPBF
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: VSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2.5 %; Terminal Pitch: .95 mm;
LTC1844ES5-1.8#TRM
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: VSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 1.8 %; Terminal Pitch: .95 mm;
LTC1844ES5-2.8
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: VSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 1.8 %; Package Body Material: PLASTIC/EPOXY;
LTC1844ES5-3.3#TRM
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: VSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 1.7 %; No. of Functions: 1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved