Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LTC1264CN#PBF by Analog Devices is a 24-terminal active filter with -8V to 8V supply voltage range. It features switched capacitor technology, Butterworth/Chebyshev response types, and operates in industrial temperature grades. Ideal for applications requiring universal response characteristics at frequencies ranging from 0.1kHz to 250kHz.
Median Price
$30.120
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$25.200
100+ parts
-
1k+ parts
10k+ parts
Analog Devices Inc
$27.700
$16.050
DigiKey
$32.540
$24.567
$22.313
Mouser Electronics
$24.560
$22.310
Digiode
$23.940
Vyrian
Anansix
Chip Stock
MARBEL Systems
$10.056
Texas Native Microelectronics
$11.559
$11.097
$10.750
$10.172
Kenton Components
$13.871
$12.206
Parana Technologies
$14.488
$13.473
IDEA Electronic Components Group
$15.578
$14.799
Vigor
$19.990
Semicontronic
$21.420
$20.884
$20.777
Corphita
$22.680
DigiPath Technology Company
$24.302
$23.330
Corohmni
Qasali Group International
$31.209
$29.025
$27.464
Microchip USA
$54.717
iodParts Technologies Inc.
Perfect Parts
Provides durability and protection for the filter components, ensuring long-lasting performance.
Offers versatility and flexibility in filtering multiple signals or frequencies simultaneously.
Enables easy installation and replacement on circuit boards.
Provides high accuracy and low noise filtering, ensuring precise signal processing.
Ensures reliable performance in a wide range of environmental conditions.
Indicates the filter's performance characteristics in terms of frequency response and signal attenuation.
Suitable for filtering a wide range of frequencies with high precision.
Designed to meet industrial temperature requirements, ensuring stability in harsh operating environments.
Active Filters LTC1264CN#PBF attributes and parameters. Explore more Active Filters devices from Analog Devices
Supply Voltage Limit:
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage:
Maximum Negative Supply Voltage:
Minimum Negative Supply Voltage:
Nominal Negative Supply Voltage:
Response Type:
Filter Technology:
Maximum Frequency - Cutoff or Center:
Minimum Frequency - Cutoff or Center:
Transfer Characteristics:
Poles and Zeros:
Maximum Operating Temperature:
Minimum Operating Temperature:
Moisture Sensitivity Level (MSL):
Soldering Temperature:
Temperature Grade:
Reflow Temperature Time Limit:
Total Functions:
Total Terminals:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
Seated Height Limit:
Package Style:
Form Factor:
Package Code:
Package Body Material:
Surface Mounting:
JESD-30 Code:
JESD-609 Code:
Qualified:
LTC1264CN#PBF Active Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
BAV99
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0520LT3G
Onsemi
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
1N4148
ROHM
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358M
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
TCA6424ARGJR
Texas Instruments
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
MBRM140T1G
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
DRV5053VAQLPG
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
Weitronic Enterprise
LL4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Comchip Technology
LM555CM
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LTC1164-5CSW#TRPBF
Analog Devices
LTC1164-5CSW#TRPBF by Analog Devices is a 16-terminal active filter with -8V to 8V supply voltage range, offering lowpass response at 20kHz cutoff frequency. Its switched capacitor design makes it ideal for industrial applications requiring precise signal filtering in compact spaces.
MAX7490CEE+
Maxim Integrated
SWITCHED CAPACITOR FILTER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Response Type: UNIVERSAL;
LTC1067-50CS#TR
LTC1067-50CS#TR by Analog Devices is a CMOS active filter with 2 poles and 0 zeros. It operates b/w -40 to +70 °C, has a cutoff frequency range of 0.001 kHz to 40 kHz, and is resistor programmable. Ideal for universal response type applications in commercial temperature grade environments.
MAX7415EUA+T
Analog Devices' MAX7415EUA+T is a CMOS active filter with 1.5 mA Isup, 3V Vsup, and 15 kHz cutoff freq. Ideal for industrial applications, it features lowpass response and elliptic transfer characteristics in a small outline package.
MAX274BC/D
MAX274BC/D by Analog Devices is an Active Filter with 30mA Isup, -5.5V Vsup, and 24 Terminals. It operates b/w 0-70 °C and suits commercial applications requiring precise filtering in a surface-mount package.
LTC1566-1CS8#TR
LTC1566-1CS8#TR by Analog Devices is a small outline active filter with continuous time filtering. It operates at -5V to +5V, has 7 poles and zeros, and a Bessel response type. Ideal for applications requiring lowpass filtering in commercial temperature range.
TSG8510CP
STMicroelectronics
TSG8510CP by STMicroelectronics is a CMOS active filter with -5V to +5V supply voltage, 16 terminals, and 5mA max supply current. It features an elliptic lowpass response type and is ideal for commercial temperature grade applications requiring switched capacitor filters in a rectangular package.
MAX7419EUA-T
MAX7419EUA-T by Maxim Integrated is a BICMOS active filter with 5 poles and zeros. It operates b/w -40 to 85 °C, suitable for industrial applications. This switched capacitor filter has a lowpass response type and requires a supply voltage of 4.5-5.5V.
LTC1067-50IGN#TR
Linear Technology
SWITCHED CAPACITOR FILTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Response Type: UNIVERSAL;
LTC1061CSW
LTC1061CSW by Analog Devices is a 20-terminal active filter with switched capacitor technology, offering universal response type and resistor programmable transfer characteristics. It operates in an industrial temperature range from -40 to 85 °C, with a max cutoff frequency of 35 kHz. Ideal for applications requiring precise filtering in compact spaces.
MAX293ESA-T
SWITCHED CAPACITOR FILTER; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3;
MAX7480ESA+
Analog Devices' MAX7480ESA+ is a switched capacitor active filter with 8 poles and 0 zeros. It operates b/w -40 to 85°C, with a cutoff frequency range of 0.001 kHz to 2 kHz. Ideal for industrial applications requiring lowpass Butterworth response characteristics in a compact rectangular package.
LTC1563-3CGN
LTC1563-3CGN by Analog Devices is a 16-terminal active filter with continuous time filter type, operating b/w 0 to 70 °C. It features a lowpass response type with Bessel transfer characteristics and a cutoff frequency range of 0.256 kHz to 256 kHz. Ideal for applications requiring precise signal filtering in commercial temperature environments.
LTC1264-7CN#TR
LTC1264-7CN#TR by Analog Devices is a 14-terminal active filter with switched capacitor technology. It operates b/w -40 to 85 °C and has a cutoff frequency range of 200 kHz to 250 kHz. Ideal for industrial applications requiring lowpass Bessel response filters in a rectangular plastic/epoxy package.
TLC14ID/MF4A-100ID
TLC14ID/MF4A-100ID by Texas Instruments is an active filter with 3 mA Isup, +-2.5/+-5 V power supplies, and 20 kHz max center frequency. Ideal for industrial applications, this CMOS technology-based filter has a lowpass response type and 8 terminals in a small outline package.
LTC1063CSW#PBF
SWITCHED CAPACITOR FILTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Response Type: LOWPASS;
MAX280CPA+
Analog Devices' MAX280CPA+ is a CMOS active filter with 5 poles and 0 zeros, ideal for lowpass filtering applications. It operates on +-5V power supplies, with a max supply current of 10mA. With a cutoff frequency range of 0-20kHz, it offers precise signal processing in commercial temperature environments.
LTC1067-50CS#TRPBF
LTC1067-50CS#TRPBF by Analog Devices is a CMOS active filter with 2 functions, operating b/w 0 to 70 °C. It features switched capacitor technology, with a cutoff frequency range of 0.001 kHz to 40 kHz. Ideal for applications requiring resistor programmable transfer characteristics in commercial temperature grades.
TLC04CD/MF4A-50CD
TLC04CD/MF4A-50CD by Texas Instruments is an active filter with 4 poles, 0 zeros, and a cutoff frequency range of up to 40 kHz. It operates on +-2.5/+-5V power supplies, consumes 3mA max supply current, and has a response type of lowpass. Ideal for applications requiring switched capacitor filters in commercial temperature grades.
TSG8511MC
TSG8511MC by STMicroelectronics is a CMOS active filter with 16 terminals and -55 to 125 °C operating temperature range. It features a switched capacitor filter, elliptic transfer characteristics, and lowpass response type. Ideal for military applications requiring a nominal voltage of +-5V and max supply current of 5mA.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
LTC1060CSW#PBF
SWITCHED CAPACITOR FILTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Response Type: UNIVERSAL;
LTC1569IS8-7#PBF
LTC1569IS8-7#PBF by Analog Devices is a small outline active filter with continuous time filtering, 10 poles and 0 zeros. It operates in an industrial temperature range from -40 to 85°C, with a cutoff frequency of up to 150 kHz. Ideal for lowpass applications, it offers pin or resistor programmable transfer characteristics.
CONTINUOUS TIME FILTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Response Type: LOWPASS;
LTC1563-2CGN#PBF
LTC1563-2CGN#PBF by Analog Devices is a 16-terminal active filter with continuous time filtering, operating b/w 0 to 70°C. It features a lowpass response type with Butterworth transfer characteristics and a max cutoff frequency range of 256 kHz. This small outline, surface-mount device is commonly used in commercial applications requiring precise signal filtering.
CONTINUOUS TIME FILTER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Response Type: LOWPASS;
LTC1569IS8-7
LTC1569IS8-7#TRPBF
LTC1064-2CN#PBF
SWITCHED CAPACITOR FILTER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Response Type: LOWPASS;
LTC1569IS8-7#TR
LTC1060CSW#TRPBF
LTC1060CSW#TRPBF by Analog Devices is a CMOS active filter with 2 functions. It has a max operating temperature of 85°C and a min supply voltage of 2.37V. This switched capacitor filter is commonly used in industrial applications for its universal response type and transfer characteristics (Butterworth/Bessel/Chebyshev).
LTC1563-2IGN#TRPBF
CONTINUOUS TIME FILTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Response Type: LOWPASS;
LTC1563-2IGN#PBF
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved