Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LTC1164-7CSW by Analog Devices is a switched capacitor filter with 8 poles, 0 zeros, and a max cutoff frequency of 20 kHz. It operates in an industrial temperature range from -40 to 85 °C and has a small outline package suitable for surface mount applications. Ideal for lowpass filtering in various electronic circuits.
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Anansix
Q Components
One Stop Electronics
$2.690
Semicontronic
$5.690
$5.548
$5.519
MARBEL Systems
$8.299
Texas Native Microelectronics
$9.539
$9.157
$8.871
$8.394
Kenton Components
$11.447
$10.073
AZTECH Wire
$15.073
Parana Technologies
$17.631
$16.397
IDEA Electronic Components Group
$18.958
$18.010
Qasali Group International
$25.755
$23.952
$22.665
DigiPath Technology Company
$29.574
$28.392
Corphita
Glotronic Ltd.
Corohmni
A-Z Elektronik GmbH
Kepictronics
The use of plastic/epoxy material makes the product lightweight and durable, ideal for portable and long-lasting applications.
Surface mount capability allows for easy and efficient PCB assembly, saving space and reducing production costs.
The switched capacitor filter offers precise filtering capabilities and low power consumption, making it suitable for applications requiring accurate signal processing.
With a nominal supply voltage of 5V, this product can be easily integrated into various electronic systems without requiring additional power conditioning.
Having 8 poles allows for a more complex filter response, providing better control over the signal characteristics and improving overall performance.
The lowpass response type ensures that only low-frequency signals pass through the filter, making it suitable for applications where high-frequency noise rejection is critical.
Bessel transfer characteristics enable a maximally flat frequency response, maintaining signal integrity and phase linearity, which is beneficial for applications requiring accurate signal processing.
Active Filters LTC1164-7CSW attributes and parameters. Explore more Active Filters devices from Analog Devices
Supply Voltage Limit:
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage:
Maximum Negative Supply Voltage:
Minimum Negative Supply Voltage:
Nominal Negative Supply Voltage:
Response Type:
Filter Technology:
Maximum Frequency - Cutoff or Center:
Transfer Characteristics:
Poles and Zeros:
Maximum Operating Temperature:
Minimum Operating Temperature:
Moisture Sensitivity Level (MSL):
Temperature Grade:
Total Functions:
Total Terminals:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Length:
Width:
Seated Height Limit:
Package Style:
Form Factor:
Package Code:
Package Body Material:
Surface Mounting:
JESD-30 Code:
JESD-609 Code:
Qualified:
LTC1164-7CSW Active Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
BAV99
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883
Texas Instruments
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
Plessey Semiconductors Discrete Components Div
SMBJ18CA
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
EU2B-YS303C
Idec
ROTARY SWITCH;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
1N4148
Philips Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
SZNUP2105LT1G
Onsemi
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
2N2222A
Bharat Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Kec
ULN2003ADR
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
2N7002
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
MBRS130LT3G
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
Allegro MicroSystems
MAX274AMRG/883B
Analog Devices
Analog Devices' MAX274AMRG/883B is a MILITARY-grade Active Filter with 4 functions, -5.5V to 5.5V supply voltage range, and operating temperatures from -55 °C to 125°C. Its ceramic, glass-sealed package with 24 terminals in rectangular shape makes it ideal for military applications requiring precise filtering capabilities.
LTC1064-1CSW
LTC1064-1CSW by Analog Devices is a switched capacitor filter with 8 poles and 0 zeros, operating at a center frequency range of 50 kHz. It has a lowpass response type, -40 to 85 °C temperature range, and is ideal for industrial applications requiring active filters in small outline packages.
MAX281AEPA+
MAX281AEPA+ by Analog Devices is an active filter with 5 poles and zeros, BESSEL transfer characteristics, and a cutoff frequency range of 0-20 kHz. It operates at -40 to 85°C, has a supply voltage of ±5V, and is ideal for industrial applications requiring lowpass response filtering.
LTC1061ACN
LTC1061ACN by Analog Devices is a 20-terminal active filter with switched capacitor technology. It operates b/w -40 to 85 °C, with a cutoff frequency range of 0.0001-35 kHz. Ideal for industrial applications requiring resistor programmable transfer characteristics.
MAX296PA
Analog Devices' MAX296PA is an 8-terminal active filter with -5V to 5V supply voltage range. Featuring a lowpass Bessel response type, it offers a max cutoff frequency of 50 kHz. Ideal for applications requiring precise signal filtering in compact designs due to its rectangular package shape and through-hole terminal form.
MAX293CWE
Maxim Integrated
MAX293CWE by Maxim Integrated is an active filter with switched capacitor technology. It operates on a 5V supply, has 8 poles and zeros, and a cutoff frequency range of 25 kHz. Ideal for lowpass filtering applications in commercial temperature environments.
MAX262AEWG+T
Analog Devices' MAX262AEWG+T is a CMOS active filter with 2 functions, 24 terminals, and Gull Wing terminals. It operates b/w -40 °C to 85°C, with Vsup ranging from 2.37V to 6.3V. Ideal for applications requiring precise filtering in small outline packages.
LTC1067IS
LTC1067IS by Analog Devices is a CMOS active filter with 2 poles and 0 zeros. It operates in a temperature range of -40 to 85 °C, with a cutoff frequency range of 0.001 kHz to 20 kHz. Ideal for industrial applications requiring resistor programmable transfer characteristics.
LTC1067IS#TR
LTC1067IS#TR by Analog Devices is a CMOS active filter with 2 poles and 0 zeros, operating b/w -40 to 85 °C. It features a switched capacitor filter technology, resistor programmable transfer characteristics, and a cutoff frequency range of 0.001 kHz to 20 kHz. Ideal for industrial applications requiring precise signal filtering in compact designs.
LTC1562ACG#PBF
LTC1562ACG#PBF by Analog Devices is a CMOS active filter with 4 functions, -5V to 5V supply voltage range, and 150kHz max cutoff frequency. Ideal for continuous time filtering applications in commercial temperature environments. Package: PLASTIC/EPOXY, SMD GULL WING, 20 terminals.
MAX7419EUA+
SWITCHED CAPACITOR FILTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Response Type: LOWPASS;
MAX7421EUA
MAX7421EUA by Analog Devices is a BICMOS technology active filter with 3.6 mA Isup, 5 poles, and 0 zeros. It operates b/w -40 to 85 °C and has a lowpass response type. Ideal for applications requiring switched capacitor filters in industrial settings.
LTC1563-2IGN#PBF
Linear Technology
CONTINUOUS TIME FILTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Response Type: LOWPASS;
LTC1563-2IGN#PBF by Analog Devices is a 16-terminal active filter with continuous time filtering, operating b/w -40 to 85°C. It features a lowpass Butterworth response type with 4 poles and no zeros, suitable for industrial applications requiring a cutoff frequency range of 0.256 kHz to 256 kHz. The package is small outline, shrink pitch, making it ideal for surface mount designs.
LTC1068-25IG#TRPBF
LTC1068-25IG#TRPBF by Analog Devices is a 4-function switched capacitor filter with -5.5V max negative supply voltage and 200 kHz max cutoff frequency. Ideal for industrial applications, this active filter has a small outline package style and operates b/w -40 °C to 85°C temperature range.
TLC04CP/MF4A-50CP
TLC04CP/MF4A-50CP by Texas Instruments is an active filter with 8 terminals, CMOS technology, and a max supply current of 3 mA. It operates at temperatures from 0 to 70°C, has a cutoff frequency range up to 40 kHz, and is ideal for lowpass filtering applications in commercial-grade environments.
LTC1064CSW#PBF
SWITCHED CAPACITOR FILTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: SOP; Response Type: UNIVERSAL;
AD896JR-13N
AD896JR-13N by Analog Devices is a 7th order continuous time active filter with 16 terminals. It operates at a supply voltage range of 4.5V to 5.5V and has a cutoff frequency range of 5kHz to 13MHz, making it ideal for lowpass filtering applications in commercial temperature environments.
LTC1068-200CG#TRPBF
LTC1068-200CG#TRPBF by Analog Devices is a 4-function active filter with switched capacitor technology. It operates at -5V to 5V, has poles and zeros of 2 and 0, and a max cutoff frequency of 25 kHz. Ideal for commercial applications requiring resistor programmable transfer characteristics in a small outline package.
MAX297EWE+
Analog Devices' MAX297EWE+ is a switched capacitor active filter with 8 poles and 0 zeros. It operates at a supply voltage of +/-5V, has a cutoff frequency range of 50 kHz, and response type is lowpass. Ideal for industrial applications requiring precise signal filtering in compact designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
LTC1060CSW#PBF
SWITCHED CAPACITOR FILTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Response Type: UNIVERSAL;
LTC1569IS8-7#PBF
LTC1569IS8-7#PBF by Analog Devices is a small outline active filter with continuous time filtering, 10 poles and 0 zeros. It operates in an industrial temperature range from -40 to 85°C, with a cutoff frequency of up to 150 kHz. Ideal for lowpass applications, it offers pin or resistor programmable transfer characteristics.
CONTINUOUS TIME FILTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Response Type: LOWPASS;
LTC1563-2CGN#PBF
LTC1563-2CGN#PBF by Analog Devices is a 16-terminal active filter with continuous time filtering, operating b/w 0 to 70°C. It features a lowpass response type with Butterworth transfer characteristics and a max cutoff frequency range of 256 kHz. This small outline, surface-mount device is commonly used in commercial applications requiring precise signal filtering.
CONTINUOUS TIME FILTER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Response Type: LOWPASS;
LTC1569IS8-7
LTC1569IS8-7#TRPBF
LTC1064-2CN#PBF
SWITCHED CAPACITOR FILTER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Response Type: LOWPASS;
LTC1569IS8-7#TR
LTC1060CSW#TRPBF
LTC1060CSW#TRPBF by Analog Devices is a CMOS active filter with 2 functions. It has a max operating temperature of 85°C and a min supply voltage of 2.37V. This switched capacitor filter is commonly used in industrial applications for its universal response type and transfer characteristics (Butterworth/Bessel/Chebyshev).
LTC1563-2IGN#TRPBF
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved