Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LT5400BIMS8E-1#PBF by Analog Devices is a 4-function isolated resistor network with 10000 ohm resistance. It has a power dissipation of 0.8W and operates b/w -40 to 85°C. Ideal for surface mount applications in various electronic circuits.
Median Price
$8.329
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$5.540
100+ parts
$5.390
1k+ parts
-
10k+ parts
Verical
$6.030
Farnell
$8.086
$6.235
$6.196
Element14
$8.395
$6.163
$6.140
Mouser Electronics
$15.860
$8.360
$6.760
Analog Devices Inc
$17.200
$9.120
$7.389
Newark
$19.120
$11.100
$9.800
Rochester
$6.600
$5.910
$5.560
Arrow
$6.749
Digiode
$5.263
Nova Conductors
$6.885
Component Electronics Inc.
$9.230
$6.920
$6.000
Vyrian
Chip Stock
Anansix
Parana Technologies
$0.017
$0.016
IDEA Electronic Components Group
$0.018
DigiPath Technology Company
$0.028
$0.027
MARBEL Systems
$0.274
Texas Native Microelectronics
$0.315
$0.302
$0.293
$0.277
Kenton Components
$0.378
$0.333
Aztec Data Supply Inc.
$0.400
Qasali Group International
$0.850
$0.791
$0.748
Semicontronic
$4.710
$4.592
$4.569
Corphita
$4.986
Corohmni
Netroflash
Continental Prestige Electronics
$9.260
$6.170
$4.840
Argo Parts USA
Perfect Parts
Futuretech Components
High power dissipation capability allows for reliable performance in demanding applications.
Multiple functions in one component can save space and simplify circuit design.
Isolated network type helps prevent interference and crosstalk in circuit.
Consistent resistance value ensures accuracy and reliability in circuit operation.
Gull wing terminals provide secure and reliable surface mount connection.
High operating voltage allows for use in a wide range of applications.
Surface mounting type facilitates easy and efficient installation on circuit board.
Resistor Networks & Arrays LT5400BIMS8E-1#PBF attributes and parameters. Explore more Resistor Networks & Arrays devices from Analog Devices
Construction:
Element Power Dissipation:
First Element Resistance:
JESD-609 Code:
Mounting Type:
Network Type:
No. of Elements:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Resistance:
Resistor Type:
Second or Last Element Resistance:
Size Code:
Terminal Finish:
Terminal Shape:
Operating Voltage:
LT5400BIMS8E-1#PBF Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
2N2222A
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
1N4148
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
LM7805CT/NOPB
Texas Instruments
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
BAV99
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NC7WZ17P6X
Onsemi
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
Frontier Electronics
DP83848IVVX/NOPB
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
LM317T/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
LL4148
Promax-johnton
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM358MX
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
2N7002
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
MICRODIODE ELECTRONICS SHENZHEN CO LTD
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
GS8ALF023570BAT
Tt Electronics Plc
GS8ALF023570BAT by Tt Electronics Plc is a 357 ohm resistor array with 0.1 W power dissipation and 70 °C rated temperature. Ideal for surface mount applications, it features thin film technology, isolated network type, and 16 terminals for precise resistance tracking at 5 ppm/°C.
EXB2HV331JV
Panasonic
Panasonic EXB2HV331JV is a 330 ohm resistor network with 16 terminals, rated for 25V operating voltage. With a power dissipation of 0.063W and tolerance of 5%, it's ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and -55 to 125°C temperature range.
MNR34J5ABJ332
ROHM
ROHM's MNR34J5ABJ332 resistor network has 4 functions with 3300 ohm resistance, rated for 70-125 °C. Ideal for surface mount applications, it offers 0.125 W power dissipation and operates at up to 200 V, making it suitable for various electronic circuits.
4820P-2-203
Bourns
Bourns 4820P-2-203 resistor network features 19 elements with 20 terminals, resistance of 20k ohm, and power dissipation of 0.08W. Ideal for applications requiring a rated temperature of 70°C, this chip construction with metal glaze/thick film technology is designed for surface mounting in automotive electronics.
EXBV8V472JV
The Panasonic EXBV8V472JV is a resistor network with 4 functions, each with a resistance of 4700 ohm and a power dissipation of 0.063 W. With a temperature range from -55 to 125 °C, it is ideal for surface mount applications requiring precise resistance values in compact electronic devices.
744C083332JP
Cts
744C083332JP by Cts is a chip resistor array with 4 functions, resistance of 3300 ohm, and rated power dissipation of 0.125 W. It is ideal for surface mount applications in electronic circuits requiring isolated resistor networks with a tolerance of 5%.
RM2012A103/503PBVW10
Thin Film Technology
RM2012A103/503PBVW10 by Thin Film Technology is a 0.1W resistor array with two elements (10kΩ and 50kΩ). It has a tolerance of 0.1% and temperature coefficient tracking of 5 ppm/°C. Ideal for surface mount applications requiring precise resistance values in compact designs.
GQ8ALF013570BAT
GQ8ALF013570BAT by Tt Electronics Plc is a thin film resistor array with 8 functions, each having a resistance of 357 ohm. It has a power dissipation of 0.1 W and operates b/w -55 to 125 °C. Ideal for surface mount applications requiring precise resistance values in isolated networks.
GUS-SS8BLF-01-7871-F
GUS-SS8BLF-01-7871-F by Tt Electronics Plc is a 15-element resistor network with resistance of 7870 ohm and tolerance of 1%. Featuring TANTALUM NITRIDE/NICKEL CHROME technology, it has a power dissipation of 0.05 W and operates b/w -55 to 125 °C. Ideal for applications requiring precise resistance values in compact SMT packages.
YC164-JR-0722RL
Yageo
YC164-JR-0722RL by Yageo is a 22 ohm resistor network with 4 functions, operating voltage of 50V, and tolerance of 5%. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and temperature range from -55°C to 155°C.
766165191AP
766165191AP by Cts is a METAL GLAZE/THICK FILM resistor array with 194 ohm resistance, dual terminator network type, and SMT package style. It operates b/w -55 to 125 °C with 2% tolerance and rated power of 0.12 W. Ideal for applications requiring precise resistance values in compact electronic circuits.
4610X-102-103LF
Bourns 4610X-102-103LF resistor network features 10 terminals with 10000 ohm resistance, 2% tolerance, and 1.25W power dissipation. Ideal for through-hole mounting applications requiring isolated networks with a temperature coefficient of 50 ppm/°C.
4610X-101-563LF
4610X-101-563LF by Bourns is a resistor network with 9 elements, each at 56000 ohm resistance. It has a power dissipation of 0.2 W and operates b/w -55 to 125 °C. Ideal for applications requiring precise resistance values in compact spaces.
NOMCT16031003AT1
Vishay Intertechnology
Vishay Intertechnology's NOMCT16031003AT1 resistor network features 100000 ohm resistance, 0.1 W power dissipation, and 5 ppm/°C temperature coef tracking. Ideal for applications requiring isolated thin film technology with rugged construction in SMT package style.
CN1E4TTD103J
Koa Speer Electronics
CN1E4TTD103J by Koa Speer Electronics is a 4-function resistor network with 10000 ohm resistance, 5% tolerance, and 0.063 W power dissipation. It is designed for surface mount applications in electronic circuits, offering a temperature range of -55 to 125 °C and operating voltage of 25 V.
4816P-T02-102LF
Bourns 4816P-T02-102LF is a resistor network with 15 elements, each rated at 1000 ohm resistance and 2% tolerance. It operates b/w -55 to 125 °C with a power dissipation of 0.08 W per element. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
RKLB4S103G
RKLB4S103G by Koa Speer Electronics is a 10000 ohm resistor array with 8 terminals, 2% tolerance, and 0.125 W power dissipation. It features METAL GLAZE/THICK FILM tech, low profile construction, and operates b/w -55 to 125 °C. Ideal for applications requiring precise resistance values in compact spaces.
4607X-101-103LF
Bourns 4607X-101-103LF resistor network features 6 elements with 10000 ohm resistance, 2% tolerance, and 0.88 W power dissipation. Ideal for through-hole mounting applications requiring a temperature range of -55 to 125 °C and operating voltage up to 100 V.
EXBU38101JV
The Panasonic EXBU38101JV is a resistor network with 4 functions, each with 100 ohm resistance. It has a power dissipation of 0.063W and operates b/w -55 to 125 °C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and isolated network type.
4604X-102-203LF
Bourns 4604X-102-203LF resistor network features 2 functions with 20000 ohm resistance, 2% tolerance, and 0.5 W power dissipation. Ideal for applications requiring isolated networks in through-hole mounting with a temperature coefficient of 100 ppm/°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AD3542RBCPZ16-RL7
Analog Devices
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
LT5400AHMS8E-1#PBF
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; JESD-609 Code: e3; Length (Package): 3 mm;
Linear Technology
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; JESD-609 Code: e3; Terminal Shape: GULL WING;
LT5400BCMS8E-4#PBF
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Tolerance: 7.5 %; No. of Elements: 1; Element Power Dissipation: .8 W;
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Tolerance: 7.5 %; No. of Terminals: 8; First Element Resistance: 1000 ohm;
LT5400AIMS8E-2#PBF
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Maximum Operating Temperature: 85 Cel; Tolerance: 7.5 %; Width (Package): 3 mm;
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Maximum Operating Temperature: 85 Cel; Tolerance: 7.5 %; JESD-609 Code: e3;
LT5400BHMS8E-8#PBF
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Tolerance: 7.5 %; Shape (Package): RECTANGULAR PACKAGE; First Element Resistance: 9000 ohm;
LT5400ACMS8E-4#PBF
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Tolerance: 7.5 %; Minimum Operating Temperature: -40 Cel; Terminal Finish: MATTE TIN;
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Tolerance: 7.5 %; Operating Voltage: 75 V; Element Power Dissipation: .8 W;
LT5400BHMS8E-1#PBF
ARRAY/NETWORK RESISTOR; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -40 Cel; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
ARRAY/NETWORK RESISTOR; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -40 Cel;
LT5400AIMS8E-1#PBF
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 85 Cel; Operating Voltage: 75 V; Length (Package): 3 mm;
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 85 Cel; Terminal Shape: GULL WING; Construction: Rectangular;
LT5400BCMS8E-8#PBF
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Tolerance: 7.5 %; Network Type: ISOLATED; No. of Terminals: 8;
LT5400BIMS8E-6#PBF
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Tolerance: 7.5 %; Terminal Shape: GULL WING; Shape (Package): RECTANGULAR PACKAGE;
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Tolerance: 7.5 %; Operating Voltage: 75 V; No. of Terminals: 8;
LT5400BIMS8E-4#PBF
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Tolerance: 7.5 %; No. of Terminals: 8; No. of Elements: 1;
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Tolerance: 7.5 %; First Element Resistance: 1000 ohm; JESD-609 Code: e3;
LT5400BIMS8E-7#PBF
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Tolerance: 7.5 %; First Element Resistance: 5000 ohm; Minimum Operating Temperature: -40 Cel;
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Tolerance: 7.5 %; Temperature Coef Tracking: 1 ppm/Cel; Terminal Finish: MATTE TIN;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved