Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LT5400AHMS8E-1#PBF by Analog Devices is a SMT resistor array with isolated network type, operating voltage of 75V, and power dissipation of 0.4W. Ideal for applications requiring precise resistance values in compact surface mount designs with temperatures ranging from -40 to 125°C.
Median Price
$30.315
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Farnell
1+ parts
$20.430
100+ parts
$15.510
1k+ parts
$14.810
10k+ parts
-
Arrow
$25.610
$19.940
Analog Devices Inc
$35.020
$19.478
$15.460
Element14
$36.520
$24.020
$23.910
Newark
$47.290
$29.960
$28.240
Verical
$16.906
Bristol Electronics
$15.600
Digiode
$19.408
Nova Conductors
$20.160
Anansix
Vyrian
Advanced Electronics
$0.014
$0.013
$0.011
Corohmni
$0.143
Parana Technologies
$0.160
$0.149
IDEA Electronic Components Group
$0.172
$0.163
Aztec Data Supply Inc.
$0.180
DigiPath Technology Company
$0.268
$0.258
MARBEL Systems
$0.297
Texas Native Microelectronics
$0.341
$0.327
$0.317
$0.300
Kenton Components
$0.409
$0.360
Qasali Group International
$0.921
$0.856
$0.810
Semicontronic
$11.820
$11.524
$11.465
Corphita
$18.387
Aranea Global
$19.757
$18.967
Continental Prestige Electronics
$21.880
$15.830
Authorized Procurement Solutions
Argo Parts USA
Perfect Parts
The rectangular construction makes this resistor network compact and easy to integrate into various electronic circuits.
The isolated network type ensures that each resistor in the array operates independently, providing precise resistance values.
The surface mount technology (SMT) package style allows for easy and efficient installation on PCBs, saving space and reducing assembly time.
The gull wing terminal shape provides reliable solder connections and helps prevent solder bridging during assembly.
With a maximum operating temperature of 125°C, this resistor network is suitable for a wide range of applications and environments.
The wide operating temperature range of -40°C to 125°C ensures the reliability and stability of the resistor network in various conditions.
The matte tin terminal finish provides excellent solderability and corrosion resistance, ensuring long-term performance and reliability.
The low profile height of 0.86 mm makes this resistor network suitable for compact electronic devices and applications with limited space.
The array/network resistor type allows for multiple resistors to be integrated into a single package, saving board space and simplifying circuit design.
The operating voltage of 75 V makes this resistor network suitable for a wide range of voltage applications, providing flexibility and versatility.
The compact length of 3 mm further contributes to the space-saving design of this resistor network, making it ideal for small electronic devices.
The surface mounting type allows for easy and secure attachment to PCBs, simplifying assembly and reducing the overall footprint of the circuit.
With a rated power dissipation of 0.4 W, this resistor network is capable of handling moderate power levels without overheating or performance degradation.
The width of 3 mm complements the compact dimensions of this resistor network, making it suitable for applications where space is a constraint.
Resistor Networks & Arrays LT5400AHMS8E-1#PBF attributes and parameters. Explore more Resistor Networks & Arrays devices from Analog Devices
Construction:
JESD-609 Code:
Mounting Type:
Network Type:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Rated Power Dissipation (P):
Resistor Type:
Size Code:
Terminal Finish:
Terminal Shape:
Operating Voltage:
LT5400AHMS8E-1#PBF Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
LM2931Z-5.0G
Onsemi
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
2N2222A
Philips Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
DP83848IVVX/NOPB
Texas Instruments
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
ULN2803ADW
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
SS14
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
1N4148
Semitronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
Semiconductors
1N4148WS
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT2907ALT1G
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
Taiwan Semiconductor
766161821GPTR7
Cts
766161821GPTR7 by Cts is a resistor network with 15 elements, each rated at 820 ohm resistance. It has a power dissipation of 1.2W and operates b/w -55 to 125 °C, making it suitable for various applications requiring precise resistance values in compact SMT packages.
4606X-101-472LF
Bourns
4606X-101-472LF by Bourns is a resistor network with 5 elements, each 4700 ohm resistance. It has a power dissipation of 0.2 W and operates b/w -55 to 125 °C. Ideal for applications requiring precise resistance values in compact spaces.
4816P-T01-333
Bourns 4816P-T01-333 resistor network has 8 functions with 33000 ohm resistance, rated for -55 to 125 °C. It features a metal glaze/thick film technology in a chip construction with gull wing terminals. Ideal for surface mount applications requiring isolated networks with 1.28 W power dissipation at 50 V operating voltage.
BCN164A102J7
Tt Electronics Plc
BCN164A102J7 by Tt Electronics Plc is a 4-function resistor network with 1000 ohm resistance, 0.063 W power dissipation, and -55 to 155 °C operating temperature range. It is used in SMT applications for voltage up to 50 V due to its isolated network type and metal glaze/thick film technology.
YC124-JR-0722KL
Yageo
YC124-JR-0722KL by Yageo is a 4-function resistor array with resistance of 22000 ohm, operating voltage of 25V, and rated power dissipation of 0.0625W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and temperature range from -55 to 155 °C.
EXB2HV330JV
Panasonic
Panasonic EXB2HV330JV is a 33 ohm resistor network with 16 terminals, SMT package style, and 5% tolerance. It operates at temperatures from -55 to 125 °C and has a power dissipation of 0.25 W. Ideal for automotive applications due to AEC-Q200 reference standard compliance.
4605X-101-203LF
Bourns 4605X-101-203LF resistor network features 4 elements with 20000 ohm resistance, rated at 0.2 W power dissipation. With a temperature coefficient of 50 ppm/°C, it is ideal for applications requiring precise resistance values in a compact SIP package. The through-hole mounting and high operating voltage of 100 V make it suitable for various electronic circuits.
4608X-102-331LF
Bourns 4608X-102-331LF resistor network features 330 ohm resistance, 2% tolerance, and 1W power dissipation. Ideal for through-hole mounting applications in electronics requiring isolated networks with a temperature coefficient of 100 ppm/°C. Dimensions: 20.27mm x 2.49mm x 8.89mm (LxWxH).
TC164-FR-0722RL
Yageo's TC164-FR-0722RL is a 4-function resistor array with 22 ohm resistance, rated for temperatures from -55 to 155 °C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and 1% tolerance.
EXBN8V100JX
The Panasonic EXBN8V100JX is a resistor network with 4 functions, each with 10 ohm resistance. It operates at temperatures from -55 to 125 °C and has a power dissipation of 0.031 W. Ideal for surface mount applications in electronics due to its compact rectangular package design.
Y4485V0004QT9R
Vishay Intertechnology
Vishay Intertechnology's Y4485V0004QT9R is a Metal Foil resistor network with 1000 ohm resistance, 0.02% tolerance, and 25 V operating voltage. Ideal for precision applications requiring non-inductive construction, such as high-accuracy voltage dividers in electronic circuits. Operating temperature range from -55 to 125 °C with low temp coef of 2 ppm/°C ensures stable performance.
LT5400AIMS8E-2#PBF
Linear Technology
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Maximum Operating Temperature: 85 Cel; Tolerance: 7.5 %; Width (Package): 3 mm;
MAX5490XA25000+T
Maxim Integrated
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .5714 W; Maximum Operating Temperature: 125 Cel; JESD-609 Code: e3; Packing Method: TR;
YC164-JR-07470KL
YC164-JR-07470KL by Yageo is a 4-function resistor network with 470000 ohm resistance, rated at 70 to 155 °C. Its SMT package style and isolated network type make it ideal for AEC-Q200 compliant applications requiring a tolerance of 5% and operating voltage up to 50 V.
RM2012A103/103PBVW10
Thin Film Technology
RM2012A103/103PBVW10 by Thin Film Technology is a 0.1W resistor array with two 10000 ohm elements, offering 0.1% tolerance and 5 ppm/°C temperature coef tracking. Ideal for surface mount applications requiring precise resistance values in compact designs.
EXBA10E103J
EXBA10E103J by Panasonic is a resistor network with 8 elements, each having a resistance of 10000 ohm and a tolerance of 5%. It operates at temperatures ranging from -55 to 125 °C and has a power dissipation of 0.063 W. This SMT package is ideal for applications requiring precise resistance values in compact electronic circuits.
742C08322R0FP
The Cts 742C08322R0FP resistor network has a power dissipation of 0.063W, rated at 70°C, with 4 functions. It utilizes METAL GLAZE/THICK FILM technology in a rectangular SMT package for applications requiring isolated resistance of 22 ohm and operating voltage up to 50V.
Y4485V0001QT9R
Vishay Intertechnology Y4485V0001QT9R is a Metal Foil resistor network with 10000 ohm resistance, 0.02% tolerance, and 25 V operating voltage. Ideal for precision applications requiring non-inductive construction, such as divider networks in electronic circuits. Operating temperature range from -55 to 125 °C with low temp coef of 2 ppm/°C ensures stable performance.
TC164-JR-0715KL
Yageo's TC164-JR-0715KL resistor network features 4 functions with 15000 ohm resistance, suitable for SMT mounting in various applications. With a temperature coefficient of 200 ppm/°C and operating voltage of 50V, it offers high precision and reliability. The rectangular package design with matte tin finish makes it ideal for automotive electronics meeting AEC-Q200 standards.
MAX5491WA30000+T
ARRAY/NETWORK RESISTOR; Network Type: DIVIDER; Terminal Finish: MATTE TIN;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADMV8420ACPZ-R5
Analog Devices
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
LT5400AHMS8E-1#PBF
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; JESD-609 Code: e3; Terminal Shape: GULL WING;
LT5400BCMS8E-4#PBF
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Tolerance: 7.5 %; No. of Elements: 1; Element Power Dissipation: .8 W;
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Tolerance: 7.5 %; No. of Terminals: 8; First Element Resistance: 1000 ohm;
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Maximum Operating Temperature: 85 Cel; Tolerance: 7.5 %; JESD-609 Code: e3;
LT5400BHMS8E-8#PBF
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Tolerance: 7.5 %; Shape (Package): RECTANGULAR PACKAGE; First Element Resistance: 9000 ohm;
LT5400ACMS8E-4#PBF
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Tolerance: 7.5 %; Minimum Operating Temperature: -40 Cel; Terminal Finish: MATTE TIN;
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Tolerance: 7.5 %; Operating Voltage: 75 V; Element Power Dissipation: .8 W;
LT5400BHMS8E-1#PBF
ARRAY/NETWORK RESISTOR; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -40 Cel; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
ARRAY/NETWORK RESISTOR; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -40 Cel;
LT5400AIMS8E-1#PBF
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 85 Cel; Operating Voltage: 75 V; Length (Package): 3 mm;
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 85 Cel; Terminal Shape: GULL WING; Construction: Rectangular;
LT5400BCMS8E-8#PBF
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Tolerance: 7.5 %; Network Type: ISOLATED; No. of Terminals: 8;
LT5400BIMS8E-6#PBF
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Tolerance: 7.5 %; Terminal Shape: GULL WING; Shape (Package): RECTANGULAR PACKAGE;
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Tolerance: 7.5 %; Operating Voltage: 75 V; No. of Terminals: 8;
LT5400BIMS8E-4#PBF
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Tolerance: 7.5 %; No. of Terminals: 8; No. of Elements: 1;
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Tolerance: 7.5 %; First Element Resistance: 1000 ohm; JESD-609 Code: e3;
LT5400BIMS8E-7#PBF
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Tolerance: 7.5 %; First Element Resistance: 5000 ohm; Minimum Operating Temperature: -40 Cel;
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Tolerance: 7.5 %; Temperature Coef Tracking: 1 ppm/Cel; Terminal Finish: MATTE TIN;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved