Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
WIDE BAND MEDIUM POWER; Characteristic Impedance: 50 ohm; Gain: 25 dB; Minimum Operating Temperature: -55 Cel; Maximum Input Power (CW): 20 dBm; Minimum Operating Frequency: 27300 MHz;
Median Price
$84.030
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
1k+ parts
$75.180
10k+ parts
$70.760
Vyrian
Digiode
Parana Technologies
$0.754
$0.701
IDEA Electronic Components Group
$0.811
$0.770
DigiPath Technology Company
$1.265
$1.215
AZTECH Wire
$14.750
Ampacity Inc.
$25.000
One Stop Electronics
$33.000
Semicontronic
$79.560
$77.571
$77.173
QUARKTWIN TECHNOLOGY LTD
Corphita
RF & Microwave Amplifiers HMC906A attributes and parameters. Explore more RF & Microwave Amplifiers devices from Analog Devices
Characteristic Impedance:
Construction:
Gain:
Maximum Input Power (CW):
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
RF or Microwave Device Type:
HMC906A RF & Microwave trade compliance attributes, and parameters.
ECCN
3A001.B.2.D
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
PCN Obsolescence/ EOL - EV1HMCx/HMCx obs 08/Jun/2022
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
1N4148WS
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
LL4148
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
OPA2277UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Electronic Devices
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MMBT3904LT1G
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
1N4148WT
Good-ark Electronics
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
HMC462
Analog Devices
Analog Devices' HMC462 RF amplifier offers 12.5 dB gain, 18 dBm CW input power, and 1.25 max VSWR. Ideal for wideband low-power applications from 2-20 GHz, with PHEMT tech and surface mounting feature.
QPL6207QTR7
Qorvo
QPL6207QTR7 by Qorvo is a RF & Microwave Amplifier with 18.1 dB Gain, 2.2 VSWR, and 30 dBm Max Input Power. It operates in the frequency range of 2320-2345 MHz, suitable for narrowband low-power applications in automotive electronics due to AEC-Q100 screening level compliance.
XTRF1208RPVR
XTRF1208RPVR by Texas Instruments is a wide band low power RF amplifier with 16 dB gain. Operating from 10 MHz to 11 GHz, it features BICMOS technology and a characteristic impedance of 50 ohm. Ideal for applications requiring surface mount components in the RF & Microwave domain.
QPA1010D
Qorvo's QPA1010D is a GAN RF amplifier with 30 dBm CW input power, 23.1 dB gain, and 50 ohm impedance. Ideal for wideband high-power applications from 7900 MHz to 11000 MHz, it features a VSWR of 3 and operates on -1.9V to 24V supplies.
AVA-0233LN+
Mini-circuits
WIDE BAND LOW POWER;
HMC311SC70ETR
Analog Devices' HMC311SC70ETR is a GAAS RF amplifier with 11dB gain, operating from 0-8000MHz. It has a max input power of 10dBm and requires a 5V supply, making it ideal for wideband low-power applications in RF & microwave systems. The component is surface-mountable and operates b/w -40 to 85°C.
MSA-0686-BLKG
Broadcom
Broadcom's MSA-0686-BLKG is a wide band low power RF amplifier with 16.5 dB gain, operating from 0 to 800 MHz. It has a max input power of 13 dBm and VSWR of 1.7, suitable for surface mount applications in RF & microwave systems. The component features a matte tin finish, operates at 3.5V with a supply current of 20 mA, and has a characteristic impedance of 50 ohms.
HMC441LC3B
Analog Devices' HMC441LC3B is a wide band medium power RF amplifier with 10 dB gain, operating from 6-18 GHz. It has a max input power of 15 dBm and operates on a 5V supply, drawing 115 mA. Ideal for RF & microwave applications requiring high performance in plastic/epoxy package.
PMA3-83LNW+
PMA3-83LNW+ by Mini-circuits is a wide band low power RF amplifier with a gain of 16.9 dB. It operates at frequencies ranging from 400 MHz to 8000 MHz and has a max input power of 16 dBm. This amplifier is commonly used in applications requiring amplification in the RF and microwave range.
LMV221SD/NOPB
RF/Microwave Amplifiers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Terminal Finish: Matte Tin (Sn); Package Equivalence Code: SOLCC6,.1,25;
AMMP-6220-TR2
AMMP-6220-TR2 by Broadcom is a wide band low power RF amplifier with 22 dB gain. It operates from 6 GHz to 20 GHz, with max input power of 15 dBm and characteristic impedance of 50 ohm. Ideal for applications requiring surface mount construction in RF & microwave systems.
MGA-81563-TR1
Hewlett Packard
WIDE BAND LOW POWER; Minimum Operating Frequency: 100 MHz; Characteristic Impedance: 50 ohm; Construction: COMPONENT; Maximum Voltage Standing Wave Ratio: 2; Maximum Input Power (CW): 13 dBm;
HMC441LP3ETR
Hittite Microwave
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Terminal Finish: Matte Tin (Sn);
HMC659LC5
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Package Body Material: PLASTIC/EPOXY; Minimum Operating Temperature: -40 Cel; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
MSA-1105
Avantek
RF/Microwave Amplifiers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Power Supplies (V): 5.5;
PHA-13LN+
Mini-circuits' PHA-13LN+ is a wideband low power RF amplifier with 20.2 dB gain, suitable for frequencies ranging from 1 MHz to 1000 MHz. It can handle up to 8 dBm CW input power and operates b/w -40°C to 105°C, making it ideal for various RF and microwave applications.
QPA2735TR7X
Qorvo's QPA2735TR7X is a GAAS RF amplifier with 26dB gain, operating from 13.75-18 GHz. It has a max input power of 20 dBm and operates on a 3.5V supply, ideal for wideband low-power applications in RF & microwave systems. The component features surface mounting and a plastic/epoxy package body material.
MGA-72543-TR1G
Broadcom's MGA-72543-TR1G is a GAAS RF amplifier with 9.2 dB gain, operating from 100 MHz to 6 GHz. It has a max input power of 20 dBm and VSWR of 2.1, suitable for wideband low-power applications in RF and microwave systems.
MAAL-011129-TR1000
M/a-com Technology Solutions
MAAL-011129-TR1000 by M/a-com Technology Solutions is a wide band low power RF amplifier with 20 dB gain. It operates b/w 18-31.5 GHz, handling up to 10 dBm CW input power. Ideal for RF applications requiring high performance in temperatures ranging from -40 to 85°C.
SP9711
Spectrum Control
WIDE BAND LOW POWER; Maximum Voltage Standing Wave Ratio: 2; Minimum Operating Frequency: 1000 MHz; Characteristic Impedance: 50 ohm; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 85 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADPA7007CHIP
HMC903LP3ETR
Analog Devices' HMC903LP3ETR is a wide band low power RF amplifier with 18.5 dB gain, operating from 6-17 GHz. It has a max input power of 20 dBm and operates on a 3.5V supply, making it ideal for RF and microwave applications requiring high performance in plastic/epoxy packages.
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Construction: COMPONENT;
HMC903LP3E
Analog Devices' HMC903LP3E is a GAAS RF amplifier with 17.5 dB gain, operating from 6-17 GHz. It has a max input power of 10 dBm and draws 110 mA at 3.5 V. Ideal for wideband low-power applications, this component offers high performance in plastic/epoxy packaging for surface mount assembly.
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; JESD-609 Code: e3;
HMC994APM5E
Analog Devices' HMC994APM5E is a wide band medium power RF amplifier with 13 dB gain and 25 dBm CW input power. With a VSWR of 7, it operates from -40°C to 85°C, covering frequencies from 0 MHz to 28 GHz. Ideal for RF and microwave applications requiring high performance amplification in various environments.
HMC907APM5ETR
HMC907APM5ETR by Analog Devices is a RF & Microwave Amplifier with 25 dBm CW input power, 7 VSWR, and 12 dB gain. Ideal for wide band medium power applications, it operates from -40 to 85°C with a frequency range of 200 MHz to 22 GHz.
HMC907APM5E
HMC907APM5E by Analog Devices is a wide band medium power RF amplifier with 12 dB gain and 25 dBm max input power. It operates from 200 MHz to 22 GHz, has a VSWR of 7, and requires a 10V supply. Ideal for RF & microwave applications requiring high performance in plastic/epoxy package.
HMC952ALP5GETR
HMC952ALP5GETR by Analog Devices is a wide band medium power RF amplifier with 28 dB gain, operating from 8-14 GHz. It can handle up to 24 dBm CW input power and operates b/w -55°C to +85°C. Ideal for RF and microwave applications requiring high gain and broad frequency coverage.
HMC960LP4ETR
Analog Devices' HMC960LP4ETR is a wide band high power RF amplifier with 0 dB gain, operating from 0 to 100 MHz. It has 24 terminals, matte tin finish, and operates b/w -40°C to +85°C. Ideal for applications requiring surface mount components in RF and microwave systems.
WIDE BAND HIGH POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; No. of Functions: 1; Additional Features: LOW NOISE;
HMC952ALP5GE
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; No. of Functions: 1;
HMC963LC4TR
Analog Devices' HMC963LC4TR is a wide band low power RF amplifier with 16.5 dB gain, operating from 6-26.5 GHz. It features a max input power of 0 dBm, 3.5V supply voltage, and ceramic package ideal for surface mount applications in RF & microwave systems.
WIDE BAND LOW POWER; Construction: COMPONENT; Maximum Operating Frequency: 26500 MHz; Minimum Operating Frequency: 6000 MHz; Maximum Operating Temperature: 85 Cel; Maximum Input Power (CW): 0 dBm;
HMC994ALP5ETR
WIDE BAND MEDIUM POWER;
HMC994ALP5E
HMC994ALP5E by Analog Devices is a PHEMT RF amplifier with 11 dB gain, operating up to 28 GHz. It features a max supply current of 300 mA and is designed for wideband medium power applications in a surface mount package with 32 terminals.
HMC994A
WIDE BAND MEDIUM POWER; Minimum Operating Frequency: 0 MHz; Construction: COMPONENT; Characteristic Impedance: 50 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -55 Cel;
HMC960LP4E
WIDE BAND HIGH POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Terminal Finish: MATTE TIN; Maximum Operating Frequency: 100 MHz;
WIDE BAND HIGH POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; No. of Functions: 1; Gain: 0 dB;
HMC902LP3ETR
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Frequency: 10000 MHz;
Analog Devices' HMC902LP3ETR is a wide band low power RF amplifier with 17 dB gain, operating from 5-10 GHz. It has a max input power of 10 dBm and operates on a 3.5V supply, making it ideal for RF & microwave applications requiring high performance in a compact package.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved