Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Analog Devices' HMC615LP4ETR is a GAAS RF/Microwave Mixer with 24 terminals, operating from -40 to 85 °C. It requires a 5V power supply, draws max 75mA current, and features double balanced technology. Ideal for surface mount applications in various RF and microwave systems.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Chip Stock
Digiode
Parana Technologies
$2.544
$2.366
IDEA Electronic Components Group
$2.735
$2.598
DigiPath Technology Company
$4.267
$4.096
Ampacity Inc.
$9.000
AZTECH Wire
$9.703
One Stop Electronics
$21.000
Semicontronic
$28.000
$27.300
$27.160
Authorized Procurement Solutions
Corphita
This material provides durability and protection for the internal components, making the mixer suitable for a variety of applications.
Operating at a low voltage of 5V makes the mixer energy efficient and compatible with a wide range of power supplies.
With 24 terminals, this mixer offers versatile connectivity options for a wide range of input and output configurations.
The high maximum operating temperature of 85 °C ensures reliability and performance in various operating conditions.
The low minimum operating temperature of -40 °C allows the mixer to function effectively even in extreme cold environments.
Utilizing Gallium Arsenide (GaAs) technology, this mixer offers high-speed performance and low noise characteristics for superior signal processing.
The maximum supply current of 75 mA ensures efficient power consumption and prevents overheating during operation.
Being a double balanced mixer, this device provides excellent balance and suppression of undesired signals, resulting in high quality mixing of RF/Microwave signals.
The surface mount design allows for easy integration and compact installation, making it ideal for space-constrained applications.
RF/Microwave Mixers HMC615LP4ETR attributes and parameters. Explore more RF/Microwave Mixers devices from Analog Devices
Mounting Feature:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
RF or Microwave Device Type:
Sub-Category:
Maximum Supply Current:
Technology:
HMC615LP4ETR RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
2N2222A
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002,215
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
Dc Components
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
Microsemi
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
BAV99
Philips Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
2N7002-7-F
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
ADL5802XCPZ-R7
Analog Devices
DOUBLE BALANCED;
HMC292A
Analog Devices' HMC292A is a RF/Microwave Mixer with 18 dBm CW input power, 14000-32000 MHz frequency range, and 12.5 dB conversion loss. It's a double balanced component ideal for applications requiring high-performance mixers in the -55 to 85 °C temperature range.
CM-3
Qorvo
HMC220AMS8E
Analog Devices' HMC220AMS8E is a RF/Microwave Mixer with 50 ohm impedance, 10.5 dB conversion loss, and 13 dBm CW input power. It operates from -40 to 85°C, suitable for applications requiring double balanced mixers in the frequency range of 5-12 GHz.
HMC-C049
Analog Devices' HMC-C049 is a COAXIAL RF/Microwave Mixer with 25 dBm CW input power. Featuring DOUBLE BALANCED design, it operates from 7-14 GHz with 11 dB max conversion loss. Ideal for high-frequency applications requiring low signal distortion in the -55 to 85°C temperature range.
HMC774LC3B
Analog Devices' HMC774LC3B is a triple balanced RF/Microwave Mixer with 50 ohm impedance. It offers a max conversion loss of 14 dB, can handle up to 21 dBm CW input power, and operates in the frequency range of 7-34 GHz. Ideal for high-frequency applications requiring precise signal mixing in environments ranging from -40°C to 85°C.
RMS-30+
Mini-circuits
The Mini-circuits RMS-30+ is a ceramic RF mixer with 6 terminals, operating from 200 MHz to 3 GHz. It offers a max conversion loss of 9.8 dB and can handle up to 17 dBm CW input power. Ideal for applications requiring double balanced RF/microwave mixers in surface mount configurations.
RMS-1MH+
The Mini-circuits RMS-1MH+ is a RF/Microwave Mixer with 6 terminals, operating from 2MHz to 500MHz. It offers a low conversion loss of 8dB and can handle up to 23dBm CW input power. Ideal for applications requiring double balanced mixers in surface mount packages.
HMC787AG-SX
HMC423MS8
Analog Devices' HMC423MS8 is a RF/Microwave Mixer with 50 ohm impedance, operating frequency range of 600-1300 MHz, and conversion loss of 11 dB. It is a double balanced component suitable for applications requiring high input power handling up to 13 dBm in plastic/epoxy package ideal for surface mounting.
AMMP-6530-TR2
Broadcom
IMAGE REJECTION; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Minimum Operating Frequency: 5000 MHz; Package Equivalence Code: LCC8,.2SQ,28;
AD8344ACPZ-REEL7
AD8344ACPZ-REEL7 by Analog Devices is a RF/Microwave Mixer with 16 terminals, operating frequency of 400-1200 MHz, and max input power of 12 dBm. It is used in applications requiring double balanced technology, with a supply voltage of 5V and operating temperature range from -40 to 85 °C.
HA22001T
DOUBLE BALANCED; Maximum Operating Temperature: 85 Cel; Construction: COMPONENT; Additional Features: LOW NOISE; Minimum Operating Temperature: -30 Cel;
HMC622LP4E
Analog Devices' HMC622LP4E is a RF/Microwave Mixer with 24 terminals, operating from -40 to 85 °C. It has a max input power of 22 dBm and operates at frequencies b/w 1800-3900 MHz. Ideal for applications requiring double balanced technology and surface mounting features.
LTC5569IUF#TRPBF
LTC5569IUF#TRPBF by Analog Devices is a RF/Microwave Mixer with 15 dBm CW input power, operating from -40 to 105 °C. It features double balanced design, 50 ohm impedance, and operates b/w 300-4000 MHz. Ideal for high-frequency applications in various industries.
ADL5356ACPZ-R7
ADL5356ACPZ-R7 by Analog Devices is a RF/Microwave Mixer with 36 terminals, operating at 1200-2500 MHz. Utilizes BICMOS technology, offering double balanced design for 50 ohm impedance. Ideal for applications requiring high frequency signal mixing in temperature range of -40 to 85 °C.
HMC170C8
Analog Devices' HMC170C8 is a RF/Microwave Mixer with 50 ohm impedance, 10 dB max conversion loss, and 13 dBm CW input power. It operates from -55°C to 85°C, suitable for applications requiring double balanced mixers in the frequency range of 2500-4000 MHz.
AMMC-6530-W10
Agilent Technologies
IMAGE REJECTION; Characteristic Impedance: 50 ohm; Maximum Input Power (CW): 25 dBm; Maximum Conversion Loss: 8 dB; Maximum Operating Frequency: 30000 MHz; Construction: COMPONENT;
ADL5811XCPZ-R7
ADL5811XCPZ-R7 by Analog Devices is a BICMOS RF/Microwave Mixer with 32 terminals, operating temperature range of -40 to 85°C. It requires a 5V power supply and comes in a surface mount package. Ideal for applications requiring high-frequency signal mixing in various electronic systems.
HMC523
Analog Devices' HMC523 is an RF/Microwave Mixer with 20 dBm CW input power, 11.5 dB conversion loss, and 50 ohm impedance. It operates b/w -55°C to 85°C, suitable for image rejection applications in the frequency range of 15-23.6 GHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
HMC665LP4E
DOUBLE BALANCED; Terminal Finish: Matte Tin (Sn); Maximum Operating Frequency: 1200 MHz; Construction: COMPONENT; Characteristic Impedance: 50 ohm; Maximum Operating Temperature: 85 Cel;
HMC622LP4ERTR
RF/Microwave Mixers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Supply Current: 220 mA;
HMC620
DOUBLE BALANCED; Construction: COMPONENT; JESD-609 Code: e4; Maximum Operating Frequency: 7000 MHz; Terminal Finish: Gold (Au); Maximum Conversion Loss: 9 dB;
HMC663LC3TR
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: CERAMIC; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
HMC622LP4RTR
RF/Microwave Mixers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
HMC622LP4
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Input Power (CW): 22 dBm;
HMC665LP4ERTR
RF/Microwave Mixers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: LCC24,.16SQ,20;
HMC615LP4E
DOUBLE BALANCED; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 4000 MHz; Maximum Input Power (CW): 27 dBm;
HMC622LP4ETR
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: LCC24,.16SQ,20;
HMC620LC4
DOUBLE BALANCED; Construction: COMPONENT; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier; Maximum Input Power (CW): 20 dBm; Minimum Operating Frequency: 3000 MHz; JESD-609 Code: e4;
HMC663LC3RTR
RF/Microwave Mixers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: CERAMIC; Technology: GAAS; Minimum Operating Temperature: -40 Cel;
HMC622LP4TR
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Supply Current: 220 mA;
HMC620LC4TR
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: CERAMIC; Technology: GAAS; Package Equivalence Code: LCC24,.16SQ,20;
HMC665LP4
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Frequency: 1200 MHz;
HMC615LP4TR
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Temperature: -40 Cel;
HMC615LP4
DOUBLE BALANCED; Characteristic Impedance: 50 ohm; JESD-609 Code: e0; Construction: COMPONENT; Maximum Conversion Loss: 13 dB; Minimum Operating Frequency: 2300 MHz;
HMC620LC4RTR
RF/Microwave Mixers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: CERAMIC; Technology: GAAS; Package Equivalence Code: LCC24,.16SQ,20;
HMC663LC3
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: CERAMIC; Technology: GAAS; Characteristic Impedance: 50 ohm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved