Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Analog Devices' HMC516 is a GAAS RF amplifier with 18dB gain, operating from 7-17GHz. It has a max input power of 5dBm and requires a 3V supply, drawing 88mA. Ideal for wideband low-power applications in RF & microwave systems due to its high performance and gold terminal finish.
Median Price
$56.120
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Analog Devices Inc
1+ parts
100+ parts
-
1k+ parts
$36.810
10k+ parts
DigiKey
Digiode
$46.360
Vyrian
Chip Stock
Nova Conductors
Inland Empire Components Inc.
Aztec Data Supply Inc.
$1.310
Parana Technologies
$1.822
$1.694
IDEA Electronic Components Group
$1.959
$1.861
DigiPath Technology Company
$3.056
$2.934
Advanced Electronics
$3.490
$3.176
$2.862
Corohmni
$37.995
Ampacity Inc.
$41.480
Semicontronic
$40.443
$40.236
Corphita
$43.920
Component Stockers USA
$99.990
Authorized Procurement Solutions
QUARKTWIN TECHNOLOGY LTD
Lixinc
Continental Prestige Electronics
RC Electronics
$48.860
$44.340
$42.780
Metaverse IC Inc.
Argo Parts USA
Bastille Electronics
This RF and Microwave amplifier can handle input power up to 5 dBm, making it suitable for a wide range of applications without risking damage due to excessive power levels.
Being a component-based amplifier allows for easier integration and customization within various RF and microwave systems.
Operating at a low voltage of 3V makes this amplifier efficient and suitable for low-power applications.
With a high maximum operating temperature of 85°C, this amplifier can withstand tough environmental conditions and continue to perform reliably.
The ability to operate at temperatures as low as -55°C ensures the amplifier's functionality even in extreme cold environments.
The gold terminal finish ensures high conductivity and reliability, which is crucial for maintaining signal integrity in RF and microwave applications.
GaAs technology offers high performance and efficiency, making this amplifier ideal for applications requiring high-speed and low-power operation.
With a low maximum supply current of 88 mA, this amplifier is energy-efficient and suitable for battery-powered devices or applications with limited power availability.
Being a wideband low-power amplifier, it offers versatility in frequency range while consuming minimal power, making it suitable for a variety of RF and microwave applications.
The 50 ohm characteristic impedance matches common RF components and transmission lines, ensuring efficient power transfer and minimizing signal reflections.
With a gain of 18 dB, this amplifier can boost signal strength effectively, improving the overall performance of the RF or microwave system it is integrated into.
Operating at a minimum frequency of 7000 MHz (7 GHz) enables this amplifier to be used in high-frequency applications, such as high-speed communications or radar systems.
With a maximum operating frequency of 17000 MHz (17 GHz), this amplifier is suitable for a wide range of RF and microwave applications that require high-frequency operation.
RF & Microwave Amplifiers HMC516 attributes and parameters. Explore more RF & Microwave Amplifiers devices from Analog Devices
Characteristic Impedance:
Construction:
Gain:
Maximum Input Power (CW):
JESD-609 Code:
No. of Functions:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Equivalence Code:
Power Supplies (V):
RF or Microwave Device Type:
Sub-Category:
Maximum Supply Current:
Technology:
Terminal Finish:
HMC516 RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
1N4148
Synsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
Wuxi Xuyang Electronic
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
SMBJ18CA
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
LM358N
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Pro-an Electronic
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
SS14
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
BAT54SLT1G
Onsemi
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
LM107H/883
Texas Instruments
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
HMC871LC5
Analog Devices
Analog Devices' HMC871LC5 is a wide band low power RF amplifier with 10 dB gain and 50 ohm impedance. It operates from 0 to 20000 MHz, handling up to 10 dBm CW input power. Ideal for applications requiring high frequency amplification in environments ranging from -40°C to 85°C.
MGA-632P8-BLKG
Broadcom
Broadcom's MGA-632P8-BLKG is a GAAS technology RF amplifier with 16dB gain, operating from 1400MHz to 3800MHz. It has a max input power of 20dBm and is ideal for wideband low-power applications. The component features surface mounting and matte tin terminal finish on an 8-terminal plastic/epoxy package body.
HMC565LC5
Analog Devices' HMC565LC5 is a wide band low power RF amplifier with 16 dB gain and 50 ohm impedance. Operating from 6-20 GHz, it handles up to 10 dBm CW input power. Ideal for applications requiring high frequency amplification in compact designs.
HMC455LP3
Analog Devices' HMC455LP3 is a GAAS RF amplifier with 9dB gain, operating from 1700-2500MHz. It has a max input power of 25dBm and VSWR of 1.4, suitable for narrowband medium-power applications in RF & microwave systems. The component features a plastic/epoxy package, surface mounting, and operates b/w -40 to 85°C.
MGA-81563-BLKG
Broadcom's MGA-81563-BLKG is a GAAS RF amplifier with 10.5 dB gain, operating from 100 MHz to 6 GHz. It has a max input power of 13 dBm and VSWR of 2, suitable for wideband low-power applications in RF & microwave systems requiring surface mount components.
HMC441LC3BTR
Hittite Microwave
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 12; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: LCC12,.12SQ,20;
MGA-81563-BLK
Agilent Technologies
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Temperature: -40 Cel;
SBF4089ZSR
Qorvo
Qorvo's SBF4089ZSR is a GAAS RF amplifier with 13.2 dB gain, operating from 0-500 MHz. It has a max input power of 15 dBm and operates at temperatures ranging from -40 to 85°C. Ideal for wideband low-power applications, it features a surface-mount package with 3 terminals and requires a 4.9V power supply.
MAX2691EWS+T
MAX2691EWS+T by Analog Devices is a BICMOS RF amplifier with 13.1 dB gain, operating at 1.8/3.3V. It is a wide band low power device suitable for surface mount applications in RF & Microwave systems, offering a characteristic impedance of 50 ohm and temperature range from -40 to 85°C.
NBB-310
Rf Micro Devices
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Package Body Material: CERAMIC; Technology: BIPOLAR; No. of Functions: 1;
BGA6130,118
NXP Semiconductors
NXP Semiconductors' BGA6130,118 is an RF & Microwave Amplifier with 3.6V power supply, 8 terminals, and 250mA max supply current. It features a plastic/epoxy package body material and nickel palladium gold terminal finish. Ideal for surface mount applications in various electronic devices.
MGA-82563-TR1G
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Terminal Finish: Tin (Sn);
XF1001-SC-0G00
Mimix Broadband
WIDE BAND MEDIUM POWER; Maximum Operating Temperature: 85 Cel; Terminal Finish: Matte Tin (Sn); Minimum Operating Frequency: 0 MHz; Gain: 10.1 dB; Maximum Input Power (CW): 24 dBm;
HMC441LH5
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 12; Package Body Material: CERAMIC; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
MSA-0686-BLK
Hewlett Packard
WIDE BAND LOW POWER; Additional Features: HIGH RELIABILITY; Gain: 16.5 dB; Construction: COMPONENT; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 800 MHz;
GALI-6F+F55
Mini-circuits
GALI-6F+F55 by Mini-circuits is a RF & Microwave Amplifier with 4.8V power supply, operating from -45°C to 85°C. It features a plastic/epoxy package, bipolar technology, and surface mounting. Ideal for applications requiring high-frequency signal amplification in various electronic systems.
XP1044-QL-0N00
M/a-com Technology Solutions
XP1044-QL-0N00 by M/a-com Technology Solutions is a RF & Microwave Amplifier with 16.5 dB Gain, 23 dBm Max Input Power (CW), and operates b/w 3500-6000 MHz. Ideal for narrow band medium power applications due to its COMPONENT construction and Matte Tin (Sn) terminal finish.
MMG3H21NT1
Freescale Semiconductor
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Package Equivalence Code: TO-243; Maximum Supply Current: 110 mA;
MGA-62563-TR1G
Broadcom's MGA-62563-TR1G is a GAAS RF amplifier with 20.4 dB gain, operating from 100 MHz to 3 GHz. It has a max input power of 21 dBm and VSWR of 2, suitable for wideband low-power applications in RF and microwave systems. The component features a plastic/epoxy package, surface mounting, and requires 3-5V power supply with a max current draw of 77 mA.
HMC5879LS7
WIDE BAND HIGH POWER;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
HMC564LC4TR
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: CERAMIC; Technology: GAAS; Maximum Input Power (CW): 5 dBm;
Analog Devices' HMC564LC4TR is a wide band low power RF amplifier with 14 dB gain, operating from 7-14 GHz. It has a max input power of 20 dBm and operates on a 3V supply, drawing up to 75 mA. Ideal for RF and microwave applications requiring high frequency amplification in compact designs.
HMC532LP4E
WIDE BAND LOW POWER; Terminal Finish: Matte Tin (Sn); Minimum Operating Frequency: 7100 MHz; Minimum Operating Temperature: -40 Cel; Maximum Voltage Standing Wave Ratio: 2; Construction: COMPONENT;
WIDE BAND LOW POWER; Construction: COMPONENT; Maximum Voltage Standing Wave Ratio: 2; JESD-609 Code: e3; Maximum Operating Frequency: 7900 MHz; Minimum Operating Frequency: 7100 MHz;
HMC5805ALS6TR
Analog Devices' HMC5805ALS6TR is a wide band low power RF amplifier with 9 dB gain and 22 dBm max input power. Operating from -40 to 85°C, it covers frequencies up to 40 GHz. Ideal for RF and microwave applications requiring high performance in a compact form factor.
HMC549MS8G
HMC549MS8G by Analog Devices is a wide band low power RF amplifier with 2 dB gain, operating from 40 MHz to 960 MHz. It has a max input power of 0 dBm and operates on a 5V power supply. This surface mount component is ideal for RF and microwave applications requiring amplification in the frequency range specified.
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; No. of Functions: 1;
HMC5805ALS6
WIDE BAND LOW POWER; Maximum Input Power (CW): 22 dBm; Minimum Operating Frequency: 0 MHz; Terminal Finish: GOLD OVER NICKEL; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 40000 MHz;
HMC564LC4TR-R5
WIDE BAND LOW POWER; Maximum Operating Frequency: 14000 MHz; Maximum Input Power (CW): 20 dBm; Characteristic Impedance: 50 ohm; Gain: 14 dB; Minimum Operating Frequency: 7000 MHz;
HMC516LC5TR
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Package Body Material: CERAMIC; Technology: GAAS; Minimum Operating Temperature: -40 Cel;
HMC516LC5TR by Analog Devices is a GAAS wide band low power RF amplifier with 1 function and 32 terminals. It operates at temperatures ranging from -40 to 85°C and requires a power supply of 3V, drawing a max current of 88mA. This surface mount package is suitable for various RF and microwave applications.
HMC549MS8GTR
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Temperature: -40 Cel;
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
HMC517LC4
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: CERAMIC; Technology: GAAS; Construction: COMPONENT;
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: CERAMIC; Technology: GAAS; Characteristic Impedance: 50 ohm;
HMC516LC5
HMC516LC5 by Analog Devices is a wide band low power RF amplifier with 18 dB gain and 50 ohm impedance. It operates from 9-18 GHz, with a max input power of 5 dBm. Ideal for RF & microwave applications requiring high performance in a compact ceramic package.
HMC506LP4E
NARROW BAND LOW POWER; Additional Features: LOW NOISE; Maximum Voltage Standing Wave Ratio: 2; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3; Maximum Operating Frequency: 8700 MHz;
NARROW BAND LOW POWER; Characteristic Impedance: 50 ohm; Minimum Operating Temperature: -40 Cel; Minimum Operating Frequency: 7800 MHz; Maximum Operating Frequency: 8700 MHz; Maximum Operating Temperature: 85 Cel;
HMC561LP3E
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved