Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Analog Devices' HMC470ATCPZ-EP-PT is a RF/Microwave Attenuator with 31 dB Nominal Attenuation, 25 dBm Max Input Power, and 2 dB Max Insertion Loss. Ideal for applications requiring variable attenuation in the frequency range of 100 MHz to 3 GHz.
Median Price
$18.143
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Arrow
1+ parts
$9.176
100+ parts
$8.748
1k+ parts
$8.656
10k+ parts
-
Chip1Stop
$15.800
Analog Devices Inc
$25.690
$19.733
$7.840
DigiKey
$29.170
$22.438
$21.388
Verical
$18.086
Rochester
$18.200
$16.290
$15.330
Digiode
$8.717
Vyrian
Parana Technologies
$1.214
$1.129
IDEA Electronic Components Group
$1.305
$1.240
DigiPath Technology Company
$2.036
$1.954
Ampacity Inc.
$7.800
Semicontronic
$7.605
$7.566
Corphita
$8.258
Authorized Procurement Solutions
This material is durable and lightweight, making the attenuator easy to handle and suitable for a variety of applications.
With a high maximum input power handling capability, this attenuator can effectively handle high power signals without degradation.
With a high level of attenuation, this attenuator can effectively reduce the signal strength to the desired level.
Having 16 terminals allows for multiple connection options, providing flexibility in system integration.
With a high maximum operating temperature, this attenuator can withstand heat and maintain performance in challenging environments.
Being a variable attenuator, this product allows for adjustable attenuation levels, providing greater control over signal strength.
With a low minimum operating frequency, this attenuator is suitable for a wide range of RF and microwave applications.
With a high maximum operating frequency, this attenuator is capable of handling a broad range of RF and microwave signals.
RF/Microwave Attenuators HMC470ATCPZ-EP-PT attributes and parameters. Explore more RF/Microwave Attenuators devices from Analog Devices
Additional Features:
Nominal Attenuation:
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
Maximum Insertion Loss:
Mounting Feature:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
RF or Microwave Device Type:
HMC470ATCPZ-EP-PT RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
1N4148WS
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Vishay Intertechnology
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
EU2B-YS2J03F
Idec
ROTARY SWITCH;
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
MURS160T3G
Onsemi
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
1N4148
Won-top Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
DP83848IVVX/NOPB
Texas Instruments
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
SMBJ18CA
STMicroelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
BAV99
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H743BIT6
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
LL4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
1N4148WT
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
HMC472ALP4E
Analog Devices
Analog Devices' HMC472ALP4E is a RF/Microwave Attenuator with 31.5 dB attenuation, 1.22 VSWR, and 3 dB insertion loss. It operates from 0 to 3800 MHz, suitable for variable attenuation in RF systems. The component has a max input power of 28 dBm and can be mounted on surfaces for applications requiring precise signal control.
19-9-2
Cobham Plc
19-9-2 by Cobham Plc is a COAXIAL FIXED ATTENUATOR with 9 dB Nominal Attenuation, 30 dBm Max Input Power (CW), and 1.35 Max VSWR. It operates b/w -55°C to 125°C, covering frequencies from 0 MHz to 18 GHz, making it ideal for RF/Microwave applications requiring precise signal attenuation.
HMC655
Analog Devices' HMC655 is a RF/Microwave Attenuator with 6 dB Nominal Attenuation and 26.02 dBm Max Input Power. It operates from -55°C to 85°C, covering frequencies from 0 MHz to 50 GHz. Ideal for applications requiring fixed attenuation in high-frequency circuits.
32-8
Api Technologies
FIXED ATTENUATOR; Additional Features: SMA, HIGH RELIABILITY; Minimum Operating Temperature: -55 Cel; Maximum Voltage Standing Wave Ratio: 1.35; Characteristic Impedance: 50 ohm; Minimum Operating Frequency: 0 MHz;
HMC470LP3TR
HMC470LP3TR by Analog Devices is a GAAS technology RF attenuator with 31 dB attenuation, 2 dB insertion loss, and 26.99 dBm CW input power. Ideal for RF/microwave applications, it operates from -40 to 85 °C, supports up to 3000 MHz frequency range, and has a surface mount package with 16 terminals.
HMC941LP4E
Analog Devices' HMC941LP4E is a RF/Microwave Attenuator with 15.5 dB Nominal Attenuation, 26.99 dBm Max Input Power (CW), and 6.5 dB Max Insertion Loss. It is a GAAS technology-based VARIABLE ATTENUATOR suitable for applications requiring precise signal attenuation in the frequency range of 100 MHz to 33 GHz.
1-30
1-30 by Cobham Plc is a COAXIAL FIXED ATTENUATOR with 30 dB Nominal Attenuation, 36.99 dBm Max Input Power (CW), and 1.25 Max VSWR. Ideal for RF/Microwave applications, it operates from -55 to 125 °C with a frequency range of 0-12400 MHz.
MTVA0200N09F
Emc Technology & Florida Rf Labs
FIXED ATTENUATOR; Nominal Attenuation: 2 dB; Minimum Operating Frequency: 0 MHz; Minimum Operating Temperature: -55 Cel; Terminal Finish: Silver (Ag); Construction: COMPONENT;
HMC305ALP4TR
Analog Devices' HMC305ALP4TR is a GaAs technology RF attenuator with 24 terminals. It operates b/w -40 °C to 85°C, suitable for variable attenuation in RF/microwave applications. The package body material is plastic/epoxy, and it can be mounted on the surface with power supplies of 3-5V.
HMC759LP3ETR
Analog Devices' HMC759LP3ETR is a BICMOS technology RF attenuator with 16 terminals, operating from -40 to 85 °C. It has a max supply current of 1mA at 5V, suitable for surface mount applications in RF/Microwave systems requiring variable attenuation control.
84-5
Aeroflex/weinschel
The Aeroflex/weinschel 84-5 is a COAXIAL fixed attenuator with 5 dB nominal attenuation, handling up to 33.01 dBm CW power. It operates from -55°C to 125°C, with VSWR of 1.5 and frequency range of 0-40000 MHz. Ideal for RF/Microwave applications requiring precise signal control.
59-3-32
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; Screening Level: MIL-C-39012; MIL-DTL-3933; Characteristic Impedance: 50 ohm; JESD-609 Code: e4; Maximum Input Power (CW): 50 dBm;
HRF-AT4521-FL-TR
Honeywell
VARIABLE ATTENUATOR;
HMC346ALC3B
Analog Devices' HMC346ALC3B is a RF attenuator with 24 dB attenuation, 18 dBm input power, and 4 dB insertion loss. Ideal for variable attenuation in RF/microwave applications from 0 to 18000 MHz. Built with GaAs technology, it operates b/w -40°C to +85°C and has a ceramic package body.
HMC624ACPSZ-EP-PT
Analog Devices' HMC624ACPSZ-EP-PT is a RF/Microwave Attenuator with 31.5 dB Nominal Attenuation, 25 dBm Max Input Power, and 3.8 dB Max Insertion Loss. It operates from 100 MHz to 6000 MHz, making it ideal for variable attenuation in RF/microwave systems requiring precise power control.
M3933/25-62N
Cinch Connectivity Solutions
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; Maximum Operating Temperature: 125 Cel; Maximum Input Power (CW): 33.01 dBm; Additional Features: SMA-F; SMA-M, I/P POWER-MAX(PEAK)=500W; Minimum Operating Temperature: -55 Cel;
HMC424AG16
Analog Devices' HMC424AG16 is a GAAS technology RF attenuator with 31.5 dB attenuation and 3.6 dB insertion loss at 3000 MHz. It operates from -40 to 85 °C, handles up to 24.5 dBm CW power, and has a characteristic impedance of 50 ohm. Ideal for RF/microwave applications requiring precise signal control in compact designs.
82-40-14
82-40-14 by Cobham Plc is a RF/Microwave Attenuator with max input power of 60 dBm, VSWR of 1.25, and attenuation of 40 dB. It operates in the frequency range of 0-3000 MHz, ideal for signal attenuation in high-power RF applications. The coaxial construction with gold/silver finish ensures reliable performance from -55 to 125°C.
44-9
44-9 by Cobham Plc is a RF/Microwave Attenuator with 9 dB nominal attenuation, 36.99 dBm CW input power, and 1.25 max VSWR. Ideal for applications requiring fixed attenuators in the frequency range of 0-18000 MHz, featuring coaxial construction and gold terminal finish. Operating temperatures from -50 to 85°C make it versatile for various environments.
AT0603T02ECAS3
American Technical Ceramics
FIXED ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Technology: AIN; Screening Level: MIL-STD-883; Maximum Voltage Standing Wave Ratio: 1.25;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
HMC424ALP3ETR
HMC424ALP3ETR by Analog Devices is a RF/Microwave Attenuator with 31.5 dB Nominal Attenuation, 1.58 Max VSWR, and -40 to 85 °C Operating Temperature range. Ideal for applications requiring precise signal attenuation in the frequency range of 100 MHz to 13 GHz.
HMC424ALP3E
HMC424ALP3E by Analog Devices is a RF attenuator with 31.5 dB attenuation, 1.58 VSWR, and 4.4 dB insertion loss. Ideal for applications requiring variable attenuation in the frequency range of 100 MHz to 13 GHz, such as wireless communication systems and radar equipment.
Hittite Microwave
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Technology: GAAS; Nominal Attenuation: 31.5 dB; Maximum Input Power (CW): 25 dBm;
HMC472ALP4ETR
RF/Microwave Attenuators; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: LCC24,.16SQ,20;
Analog Devices' HMC472ALP4ETR is a RF/Microwave Attenuator with 31.5 dB Nominal Attenuation, 1.22 Max VSWR, and 28 dBm Max Input Power. It operates from -40 to 85°C, has a GaAs technology, and covers frequencies from 0-3800 MHz. Ideal for variable attenuation in RF/microwave systems using surface mount technology.
HMC424ALH5TR
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 12; Package Body Material: CERAMIC; Technology: GAAS; Minimum Operating Temperature: -40 Cel;
HMC424ALH5
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 12; Package Body Material: CERAMIC; Technology: GAAS; Maximum Operating Frequency: 13000 MHz;
HMC470ALP3ETR
Analog Devices' HMC470ALP3ETR is a RF/Microwave Attenuator with 31 dB Nominal Attenuation, 25 dBm Max Input Power, and 2 dB Max Insertion Loss. It operates b/w -40 to 85°C and supports frequencies from 100 MHz to 3 GHz. Ideal for variable attenuation in RF/microwave circuits with a characteristic impedance of 50 ohms.
HMC468ALP3ETR
VARIABLE ATTENUATOR; Characteristic Impedance: 50 ohm; Maximum Input Power (CW): 30 dBm; Minimum Operating Temperature: -40 Cel; Nominal Attenuation: 7 dB; Terminal Finish: MATTE TIN;
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Frequency: 0 MHz;
HMC470LP3ETR
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Nominal Attenuation: 31 dB;
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Construction: COMPONENT;
HMC468ALP3E
VARIABLE ATTENUATOR; Construction: COMPONENT; Maximum Input Power (CW): 30 dBm; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel; Terminal Finish: MATTE TIN;
HMC467LP3ETR
VARIABLE ATTENUATOR; JESD-609 Code: e3; Maximum Operating Frequency: 6000 MHz; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Terminal Finish: Matte Tin (Sn);
VARIABLE ATTENUATOR; Nominal Attenuation: 6 dB; Characteristic Impedance: 50 ohm; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 85 Cel; Construction: COMPONENT;
HMC470ALP3E
HMC470ALP3E by Analog Devices is a RF/Microwave Attenuator with 31 dB Nominal Attenuation, 25 dBm Max Input Power, and 2 dB Max Insertion Loss. It operates b/w -40 to 85°C and supports frequencies from 100 MHz to 3 GHz. Ideal for variable attenuation in RF/microwave circuits.
HMC470LP3E
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Temperature: -40 Cel;
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: LCC16,.12SQ,20;
HMC425ALP3E
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Frequency: 2200 MHz;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved