Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
HMC1063LP3ETR by Analog Devices is a RF/Microwave Mixer with GaAs technology, operating from 24-28 GHz. It features 16 terminals, matte tin finish, and can handle up to 13 dBm CW input power. Ideal for image rejection applications in temperature range of -40 to 85°C.
Median Price
$14.100
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Arrow
1+ parts
$7.292
100+ parts
-
1k+ parts
10k+ parts
Verical
Chip1Stop
Analog Devices Inc
$23.120
$12.960
Rochester
$16.200
$14.490
$13.640
Digiode
$2.771
Nova Conductors
$13.960
Vyrian
DigiKey Marketplace
Parana Technologies
$1.250
$1.162
IDEA Electronic Components Group
$1.344
$1.277
DigiPath Technology Company
$2.097
$2.013
Semicontronic
$2.480
$2.418
$2.406
Corphita
$2.625
Component Stockers USA
$3.110
$15.090
Aranea Global
$13.681
$13.134
The use of plastic/epoxy as the package body material makes the mixer lightweight and cost-effective.
With a high maximum input power, this mixer can handle stronger input signals without distortion, ensuring reliable performance.
Having 16 terminals allows for more connectivity options and versatility in circuit design.
The high maximum operating temperature ensures that the mixer can operate efficiently even in challenging thermal conditions.
The low minimum operating temperature allows the mixer to function reliably in colder environments.
The use of Gallium Arsenide (GaAs) technology ensures high performance and efficiency in RF/microwave applications.
The surface mount feature simplifies the installation process and saves space on the circuit board.
With a high maximum operating frequency, this mixer is suitable for a wide range of RF/microwave applications.
RF/Microwave Mixers HMC1063LP3ETR attributes and parameters. Explore more RF/Microwave Mixers devices from Analog Devices
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
RF or Microwave Device Type:
Technology:
Terminal Finish:
HMC1063LP3ETR RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - HMCx A/T Rev 29/Mar/2023
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
MC33269T-3.3G
Onsemi
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
TCA6424ARGJR
Texas Instruments
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
2N2222A
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LL4148
Kec
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Bourns
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Alpha & Omega Semiconductor
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
2N7002
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
Mde Semiconductor
HMC410AMS8GTR
Analog Devices
Analog Devices' HMC410AMS8GTR is a GAAS technology RF mixer with 8 terminals. It operates b/w -40 °C to 85°C, featuring a double balanced design for RF/microwave applications. The surface mount package body material is plastic/epoxy, making it suitable for various communication systems.
HMC260ALC3BTR
Analog Devices' HMC260ALC3BTR is a RF/Microwave Mixer with GaAs technology, 50 ohm impedance, and 12 dB conversion loss. It operates from 10 to 26 GHz, handles up to 27 dBm CW power, and draws a max of 3 mA supply current. Ideal for high-frequency applications requiring double balanced mixers in surface mount packages.
CM-3
Vari-l
DOUBLE BALANCED;
IAM-82008
Agilent Technologies
Agilent Technologies' IAM-82008 RF/Microwave Mixer features 8 terminals, operates at -40 to 85°C, and requires a 10V power supply. With a max supply current of 65mA, this surface mount device with tin/lead finish is ideal for various RF applications.
LTC5567IUF#TRPBF
LTC5567IUF#TRPBF by Analog Devices is a RF/Microwave Mixer with 16 terminals, operating from 300 MHz to 4000 MHz. It has a max input power of 15 dBm and operates at temperatures ranging from -40 °C to 105°C. Ideal for applications requiring double balanced CMOS technology in surface mount packages.
M93C
Tyco Electronics M/a-com
TRIPLE BALANCED; Additional Features: SMA-F, I/P POWER-MAX (PEAK)=26DBM; Maximum Operating Frequency: 18000 MHz; Maximum Conversion Loss: 11.5 dB; Minimum Operating Frequency: 2000 MHz; Characteristic Impedance: 50 ohm;
HMC214MS8TR
Analog Devices' HMC214MS8TR is a GAAS technology RF/Microwave Mixer with 8 terminals. It operates b/w -40 °C to 85°C, featuring a double balanced design for surface mount applications. The package body material is made of plastic/epoxy, making it suitable for various RF and microwave circuit designs.
HMC528LC4RTR
Analog Devices' HMC528LC4RTR is a GAAS RF/Microwave Mixer with 24 terminals in a ceramic package. It operates b/w -40°C to 85°C, suitable for surface mount applications. Ideal for high-frequency signal processing in communication systems.
HMC412AMS8G
HMC412AMS8G by Analog Devices is a RF/Microwave Mixer with 50 ohm impedance, operating frequency range of 9-15 GHz, and max conversion loss of 11 dB. It can handle up to 24 dBm input power and operates in temperatures from -55°C to 85°C. Ideal for applications requiring double balanced mixers in high-frequency circuits.
LTC5541IUH#PBF
Linear Technology
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: CMOS; Maximum Operating Temperature: 85 Cel;
HMC258LC3BTR
Analog Devices' HMC258LC3BTR is a GAAS RF/Microwave Mixer with 12 terminals, operating at -40 to 85 °C. It requires a 5V power supply and draws a max current of 57mA. Ideal for surface mount applications, it is a double balanced device suitable for various RF/microwave systems.
HMC558LC3B
Analog Devices' HMC558LC3B is a RF/Microwave Mixer with 50 ohm impedance, 10 dB max conversion loss, and 25 dBm CW input power. It operates b/w -40 to 85°C, suitable for applications requiring double balanced mixers in the frequency range of 5.5-14 GHz.
HMC523LC4RTR
Analog Devices' HMC523LC4RTR is a GAAS RF/Microwave Mixer with 24 terminals in a ceramic package. It operates b/w -55°C to 85°C, suitable for surface mount applications in various communication systems and radar equipment.
HMC520LC4TR
Analog Devices' HMC520LC4TR is a GAAS RF/Microwave Mixer with 24 terminals, operating b/w -55°C to 85°C. It features gold (Au) finish with nickel (Ni) barrier and offers image rejection technology. Ideal for surface mount applications in various RF and microwave systems.
HMC521ALC4
HMC521ALC4 by Analog Devices is an RF/Microwave Mixer with a max input power of 20 dBm, operating from -40 to 85°C. It features image rejection type with 50 ohm impedance, conversion loss of 9.5 dB, and operates b/w 8.5-13.5 GHz. Ideal for applications requiring high-frequency mixing in various electronic systems.
HMC329LM3
Analog Devices' HMC329LM3 is a RF/Microwave Mixer with 50 ohm impedance, operating from 26-40 GHz. Featuring double balanced design, it offers max input power of 13 dBm and conversion loss of 11 dB. Ideal for high-frequency applications requiring precise signal mixing in temperatures ranging from -40 to +85°C.
HMC215LP4
Analog Devices' HMC215LP4 is a RF/Microwave Mixer with 24 terminals, operating from -40 to 85°C. It features a max input power of 22 dBm, double balanced technology, and operates b/w 1700-4000 MHz. Ideal for applications requiring high frequency conversion with low loss and impedance matching in surface mount configurations.
NE602AFE
RF/Microwave Mixers; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 8; Package Body Material: CERAMIC; Technology: BIPOLAR; Minimum Operating Temperature: 0 Cel;
LT5579IUH#PBF
Analog Devices' LT5579IUH#PBF is a RF/Microwave Mixer with 10 dBm CW input power, operating from -40 to 85 °C. It features double balanced design, 50 ohm impedance, and operates b/w 1.5-3.8 GHz. Ideal for high-frequency applications in communications and radar systems.
SPM5001
RF/Microwave Mixers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Package Equivalence Code: FL6,.07,25;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
HMC168C8
Hittite Microwave
DOUBLE BALANCED; Maximum Operating Frequency: 8000 MHz; Construction: COMPONENT; Maximum Input Power (CW): 13 dBm; JESD-609 Code: e4; Characteristic Impedance: 50 ohm;
DOUBLE BALANCED; Minimum Operating Frequency: 4500 MHz; Maximum Conversion Loss: 10 dB; Terminal Finish: GOLD OVER NICKEL; Construction: COMPONENT; Minimum Operating Temperature: -55 Cel;
HMC1056LP4BETR
IMAGE REJECTION; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Frequency: 12000 MHz;
IMAGE REJECTION; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Frequency: 8000 MHz;
HMC143
DOUBLE BALANCED; Technology: GAAS; Construction: COMPONENT; Terminal Finish: Gold (Au); Package Equivalence Code: DIE OR CHIP; Characteristic Impedance: 50 ohm;
Analog Devices' HMC143 is a GAAS RF/Microwave Mixer with 15 dBm CW input power, 12 dB conversion loss, and 50 ohm impedance. It operates from -55 to 85°C, suitable for applications requiring double balanced mixers in the frequency range of 5-20 GHz.
HMC1056LP4BE
Analog Devices' HMC1056LP4BE is an RF/Microwave Mixer with 16 dBm CW input power, 11 dB conversion loss, and 50 ohm impedance. It operates b/w -40 to 85°C, suitable for image rejection applications in the frequency range of 8-12 GHz.
IMAGE REJECTION; Maximum Operating Frequency: 12000 MHz; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Maximum Conversion Loss: 11 dB; Construction: COMPONENT;
HMC1063LP3E
Analog Devices' HMC1063LP3E is an RF/Microwave Mixer with 24000-28000 MHz frequency range, 50 ohm impedance, and 13 dBm CW input power. It offers image rejection and operates b/w -40 to 85°C. Ideal for applications requiring high-frequency mixing in various RF systems.
HMC1048ALC3BTR
DOUBLE BALANCED; Construction: COMPONENT; Maximum Operating Frequency: 18000 MHz; Maximum Input Power (CW): 16 dBm; Characteristic Impedance: 50 ohm; Minimum Operating Frequency: 2250 MHz;
HMC1081
DOUBLE BALANCED; Technology: GAAS; Package Equivalence Code: DIE OR CHIP; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -55 Cel;
HMC1058
IMAGE REJECTION; JESD-609 Code: e4; Terminal Finish: Gold (Au); Maximum Conversion Loss: 11 dB; Maximum Operating Temperature: 85 Cel; Characteristic Impedance: 50 ohm;
HMC1048ALC3B
DOUBLE BALANCED; Maximum Operating Temperature: 85 Cel; Maximum Input Power (CW): 16 dBm; Minimum Operating Frequency: 2250 MHz; Minimum Operating Temperature: -40 Cel; Terminal Finish: TUNGSTEN NICKEL GOLD;
HMC1042LC4
IMAGE REJECTION; Maximum Input Power (CW): 18 dBm; Terminal Finish: Gold Flash (Au) - with Nickel (Ni) barrier; Construction: COMPONENT; Maximum Operating Frequency: 33500 MHz; Maximum Conversion Loss: 14 dB;
HMC1042LC4TR
IMAGE REJECTION; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: CERAMIC; Technology: GAAS; Package Equivalence Code: LCC24,.16SQ,20;
HMC1048ALC3BTR-R5
DOUBLE BALANCED; Maximum Conversion Loss: 14 dB; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel; Minimum Operating Frequency: 2250 MHz; Maximum Input Power (CW): 16 dBm;
HMC1093
DOUBLE BALANCED; Technology: GAAS; Maximum Operating Temperature: 85 Cel; Maximum Supply Current: 210 mA; Package Equivalence Code: DIE OR CHIP; Power Supplies (V): 3;
HMC1043LC3
TRIPLE BALANCED; Terminal Finish: GOLD OVER NICKEL; JESD-609 Code: e4;
HMC1041LC4
IMAGE REJECTION; Maximum Input Power (CW): 18 dBm; Construction: COMPONENT; Maximum Operating Temperature: 85 Cel; Maximum Operating Frequency: 27000 MHz; Characteristic Impedance: 50 ohm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved