Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Analog Devices' HMC1019LP4ETR is a GaAs technology RF attenuator with 24 terminals, +-5V power supply, and 6.5mA max supply current. It operates b/w -40 °C to 85°C, ideal for variable attenuation in RF/microwave applications using surface mount technology.
Median Price
$83.930
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Arrow
1+ parts
100+ parts
-
1k+ parts
$59.250
10k+ parts
Digiode
$90.554
Vyrian
Parana Technologies
$2.766
$2.572
IDEA Electronic Components Group
$2.974
$2.825
DigiPath Technology Company
$4.639
$4.454
Semicontronic
$81.020
$78.994
$78.589
Corphita
$85.788
The use of plastic/epoxy as the package body material makes the attenuator lightweight and durable, providing ease of handling and longer product life.
The power supply range of +-5 V allows for flexible voltage input, making it compatible with a variety of systems and setups.
Having 24 terminals enables a high degree of connectivity and signal routing options, making the product versatile for different applications.
With a maximum operating temperature of 85 °C, the attenuator can withstand high temperature environments, ensuring reliable performance under tough conditions.
The attenuator can operate efficiently even at extremely low temperatures of -40 °C, making it suitable for a wide range of operating environments.
Utilizing Gallium Arsenide (GAAS) technology ensures high performance and precision in signal attenuation, making the product a reliable choice for RF and microwave applications.
The maximum supply current of 6.5 mA indicates low power consumption, which is beneficial for energy efficiency and helps in reducing operating costs.
Being a variable attenuator allows for adjustable signal attenuation levels, enabling fine-tuning of RF or microwave signals in various applications for optimal performance.
The surface mount capability facilitates easy and secure installation on PCBs or mounting surfaces, offering convenience and flexibility in system integration.
RF/Microwave Attenuators HMC1019LP4ETR attributes and parameters. Explore more RF/Microwave Attenuators devices from Analog Devices
Mounting Feature:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
RF or Microwave Device Type:
Sub-Category:
Maximum Supply Current:
Technology:
HMC1019LP4ETR RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
SS14
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
DP83848IVVX/NOPB
Texas Instruments
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
1N4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
SMBJ18CA
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Nte Electronics
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
LM358AN
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Secos
MURS160T3G
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
STMicroelectronics
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
USB2514BI-AEZG
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
2N7002
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
40-40-33
Cobham Plc
Cobham Plc's 40-40-33 is a RF/Microwave Attenuator with max input power of 51.76 dBm, VSWR of 1.2, and nominal attenuation of 40 dB. Ideal for applications requiring fixed attenuators in coaxial construction, it operates b/w -55 to 125°C with characteristic impedance of 50 ohm across frequencies from 0 to 1500 MHz.
4R-6
Api Technologies
FIXED ATTENUATOR; Construction: MODULE; JESD-609 Code: e4; Maximum Input Power (CW): 33.01 dBm; Maximum Voltage Standing Wave Ratio: 1.25; Minimum Operating Frequency: 0 MHz;
TVA0400N09W3S
Emc Technology & Florida Rf Labs
FIXED ATTENUATOR; Minimum Operating Frequency: 0 MHz; Maximum Operating Temperature: 150 Cel; Minimum Operating Temperature: -55 Cel; Maximum Input Power (CW): 33.01 dBm; Terminal Finish: Tin/Lead (Sn/Pb) - with Nickel (Ni) barrier;
4796
L-3 Narda-miteq
VARIABLE ATTENUATOR; Mounting Feature: PANEL MOUNT; Maximum Input Power (CW): 36.99 dBm; Minimum Operating Frequency: 7000 MHz; Maximum Operating Frequency: 26500 MHz; Maximum Voltage Standing Wave Ratio: 1.7;
19-7-2
Aeroflex/weinschel
FIXED ATTENUATOR; Construction: COAXIAL; Minimum Operating Frequency: 0 MHz; Characteristic Impedance: 50 ohm; Maximum Voltage Standing Wave Ratio: 1.35; Minimum Operating Temperature: -55 Cel;
HMC812LC4TR
Analog Devices
Analog Devices' HMC812LC4TR is a GaAs technology RF attenuator with 24 terminals. It offers a variable attenuation range of 4 dB from 5-30 GHz, making it ideal for RF/microwave applications requiring precise signal control in the -40 to +85 °C temperature range. The ceramic package and surface mount feature ensure reliable performance in various environments.
HMC540SLP3E
HMC540SLP3E by Analog Devices is a RF/Microwave Attenuator with 15 dB Nominal Attenuation, 26.99 dBm Max Input Power (CW), and 3 dB Max Insertion Loss. It is a VARIABLE ATTENUATOR suitable for applications requiring precise signal attenuation in the frequency range of 100 MHz to 8 GHz.
SKY12343-364LF
Skyworks Solutions
SKY12343-364LF by Skyworks Solutions is a RF/Microwave Attenuator with 25.05 dBm CW input power, 31.75 dB attenuation, and 3 dB insertion loss. It's a variable attenuator with 50 ohm impedance suitable for applications in the frequency range of 100 MHz to 4000 MHz.
ADRF5730BCCZN-R7
Analog Devices' ADRF5730BCCZN-R7 is a RF/Microwave Attenuator with 31.5 dB Nominal Attenuation, 27.99 dBm Max Input Power (CW), and 50 ohm Characteristic Impedance. Ideal for applications requiring variable attenuation in the frequency range of 100 MHz to 40 GHz, with operating temperatures from -40°C to 105°C.
ADRF5473
VARIABLE ATTENUATOR;
HMC346ALP3ETR
Analog Devices' HMC346ALP3ETR is a RF attenuator with 30 dB attenuation, 18 dBm CW input power, and 1.92 VSWR. Ideal for variable attenuation in RF/microwave applications up to 14 GHz, it features GaAs technology, surface mounting, and operates b/w -40 °C to 85°C.
66-10-14
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; Maximum Voltage Standing Wave Ratio: 1.9; Maximum Operating Frequency: 18000 MHz; Maximum Operating Temperature: 100 Cel; Construction: COAXIAL;
56-06
56-06 by Cobham Plc is a RF/Microwave Attenuator with 6 dB attenuation, 1.25 max VSWR, and 33.01 dBm CW input power. Constructed coaxially, it operates from -55°C to 100°C, ideal for fixed attenuator applications in the frequency range of 0-28000 MHz.
M2-10
FIXED ATTENUATOR; Construction: COAXIAL; Maximum Input Power (CW): 36.99 dBm; Maximum Operating Frequency: 18000 MHz; Additional Features: N-M, I/P POWER-MAX(PEAK)=1000W; JESD-609 Code: e4;
SKY12348-350LF
SKY12348-350LF by Skyworks Solutions is a 50 ohm RF attenuator with 15 dB nominal attenuation and 1.4 dB max insertion loss. It operates b/w 100 MHz to 3 GHz, handling up to 30 dBm CW power. Ideal for RF/microwave applications requiring precise signal control in temperatures ranging from -40°C to 85°C.
HMC654LP2E
Analog Devices' HMC654LP2E is a 4 dB fixed attenuator with 25.05 dBm CW input power handling, ideal for RF applications. With a frequency range of 0-25000 MHz and operating temperatures from -40 to 85°C, this surface-mount component offers reliable performance in various RF/microwave systems.
44-07
44-07 by Cobham Plc is a COAXIAL fixed attenuator with 7 dB nominal attenuation, suitable for RF/Microwave applications. It can handle up to 36.99 dBm CW input power and has a max VSWR of 1.25, operating b/w -50°C to 85°C over a frequency range of 0-18000 MHz.
BW-30N100W+
Mini-circuits
The Mini-circuits BW-30N100W+ is a 30 dB fixed attenuator with max input power of 50 dBm and VSWR of 1.45. Ideal for RF/Microwave applications, it operates from -55°C to 100°C, covering frequencies from DC to 6 GHz in a coaxial construction.
44-8
FIXED ATTENUATOR; Characteristic Impedance: 50 ohm; Maximum Input Power (CW): 36.99 dBm; Minimum Operating Temperature: -50 Cel; Terminal Finish: GOLD; Construction: COAXIAL;
LCAT1001-01
L-com
FIXED ATTENUATOR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
HMC1018ALP4E
VARIABLE ATTENUATOR; Construction: COMPONENT; Characteristic Impedance: 50 ohm; Nominal Attenuation: 31 dB; Maximum Insertion Loss: 8 dB; JESD-609 Code: e3;
HMC1018LP4E
VARIABLE ATTENUATOR; JESD-609 Code: e3; Maximum Insertion Loss: 8 dB; Maximum Operating Temperature: 85 Cel; Minimum Operating Frequency: 100 MHz; Construction: COMPONENT;
HMC1018LP4ETR
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Power Supplies (V): +-5;
HMC1019ALP4E
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Supply Current: 6.5 mA;
HMC1019LP4E
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Terminal Finish: Matte Tin (Sn);
HMC109
RF/Microwave Attenuators; Technology: GAAS; Maximum Operating Temperature: 125 Cel; Package Equivalence Code: DIE OR CHIP; Minimum Operating Temperature: -55 Cel; Power Supplies (V): -7;
Hittite Microwave
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Characteristic Impedance: 50 ohm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved