Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ADG888YCPZ-REEL7 by Analog Devices is a CMOS DPDT switch with 2 functions, 0.7 ohm Ron, and 67 dB isolation. It operates at -40 to 125 °C and has a supply voltage range of 1.8V to 5.5V. Ideal for automotive applications due to its compact size (4mm x 4mm) and quick switching time (50 ns).
Median Price
$4.705
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Arrow
1+ parts
$0.719
100+ parts
-
1k+ parts
10k+ parts
Chip1Stop
$2.440
$2.380
$2.370
Verical
$3.711
DigiKey
$5.490
$3.515
$3.473
$3.056
Mouser Electronics
$3.520
$3.120
$3.050
Newark
$5.530
$3.530
$3.380
Analog Devices Inc
$6.590
$3.123
$2.270
$2.600
Element14
$7.850
$5.030
$4.880
Rochester
$2.840
$2.540
$2.390
Farnell
$3.920
$3.330
Digiode
$2.318
Nova Conductors
$3.660
VNN
Vyrian
Bristol Electronics
LIBRA Elektronik GmbH
Speed Components Ltd
Prism Electronics
Semicontronic
$2.070
$2.018
$2.008
Ampacity Inc.
Corphita
$2.196
Argo Parts USA
Parana Technologies
$8.160
$7.589
IDEA Electronic Components Group
$8.774
$8.335
Aztec Data Supply Inc.
$12.770
DigiPath Technology Company
$13.687
$13.140
Corohmni
$18.902
Lixinc
Perfect Parts
RC Electronics
Authorized Procurement Solutions
Continental Prestige Electronics
$3.610
$2.590
Robosynatics
Lucentia Tech
Cyclops Electronics Ltd (Excess)
Surface mount technology allows for easy and efficient installation on circuit boards, making this product a convenient choice for assembly processes.
Having multiple functions in one device can save space and simplify circuit designs, making this product versatile and cost-effective.
The specified supply voltage ensures compatibility with a wide range of applications, offering flexibility in usage.
With a high maximum operating temperature, this product is suitable for use in demanding environments and applications where heat dissipation is a concern.
CMOS technology offers low power consumption, fast switching speeds, and high noise immunity, making this product efficient and reliable for digital circuit applications.
Multiplexers & Switches ADG888YCPZ-REEL7 attributes and parameters. Explore more Multiplexers & Switches devices from Analog Devices
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Channels:
No. of Functions:
No. of Terminals:
Nominal Off-state Isolation:
Nominal On-state Resistance Match:
Maximum On-state Resistance (Ron):
Maximum Operating Temperature:
Minimum Operating Temperature:
Output (V):
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Maximum Switch-off Time:
Maximum Switch-on Time:
Switching (V):
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
ADG888YCPZ-REEL7 Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Assembly Site Revision A 05/May/2014
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
1N4148
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
SS14
Jinan Jingheng Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
BAV99
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDV304P
Onsemi
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
SMBJ18CA
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
2N2222A
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358N
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
Diotec Semiconductor Ag
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
1N4148WT-7
Diodes Incorporated
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
MPC506AU/1K
Texas Instruments
The Texas Instruments MPC506AU/1K is a CMOS single-ended multiplexer with 28 terminals in a small outline package. It operates at industrial temperature grades, with a max supply current of 1.5mA and nominal voltage of +-15V. Ideal for applications requiring common output, it offers fast switching times and high off-state isolation.
HD3SS3212RKSR
HD3SS3212RKSR by Texas Instruments is a 20-terminal chip carrier switch with 2 functions, operating at a supply voltage of 3.3V. With a max bandwidth of 8000 kHz, it is ideal for applications requiring high-speed signal switching in commercial temperature environments. The device features low on-state resistance (8 ohm) and common output configuration for efficient performance.
ADG5436FBRUZ-RL7
Analog Devices
ADG5436FBRUZ-RL7 by Analog Devices is a SPDT multiplexer with 2 functions, operating at -40 to 125°C. It has a max on-state resistance of 11.2 ohm and can handle supply voltages from -16.5V to 16.5V. Ideal for automotive applications due to its small outline package and separate output feature.
AD8170ARZ
AD8170ARZ by Analog Devices is a video multiplexer with 2 channels, operating at ±5V supplies. It features a small outline package, dual terminal position, and 17ns switch-on time. Ideal for industrial applications requiring fast signal switching in a compact form factor.
MAX333ACPP
MAX333ACPP by Maxim Integrated is a 4-function multiplexer with 20 terminals, operating at -40 to +85°C. It features a nominal voltage of ±15V, on-state resistance of 45Ω, and break-before-make switching. Ideal for applications requiring high-speed signal routing in industrial settings.
TS3DDR3812RUAR
TS3DDR3812RUAR by Texas Instruments is a dual-function single-ended multiplexer with 12 channels and 42 terminals. It operates at a supply voltage of 3.3V, has a max bandwidth of 1675 kHz, and offers an on-state resistance of 12 ohms. Ideal for industrial applications requiring high-speed switching with low power consumption.
MAX4567EEE+
MAX4567EEE+ by Analog Devices is a dual-function audio/video switch with 16 terminals, operating at -40 to 85°C. It features a max on-state resistance of 60 ohm and nominal off-state isolation of 83 dB. Ideal for industrial applications requiring CMOS technology and break-before-make switching behavior.
MAX4564EUA+
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
ADG704BRMZ
ADG704BRMZ by Analog Devices is a CMOS multiplexer with 4 channels, 10 terminals, and a max supply voltage of 5.5V. It operates in industrial temperature range (-40 to 85 °C) and has a common output. Ideal for applications requiring fast switching with low on-state resistance (8 ohm) and high off-state isolation (60 dB).
HMC8038LP4CE
Analog Devices' HMC8038LP4CE is a 16-terminal SPDT multiplexer with a nominal voltage of 3.3V, operating b/w -40 to 105°C. This square-shaped chip carrier has a very thin profile and matte tin finish, suitable for industrial applications requiring high-temperature operation and compact design.
ADG736BRMZ-REEL
ADG736BRMZ-REEL by Analog Devices is a CMOS SPDT switch with 2 functions, operating at temperatures from -40 to 125°C. With a max on-state resistance of 12 ohm and off-state isolation of 62 dB, it's ideal for automotive applications requiring separate outputs and fast switching times. The small outline package with a thin profile and shrink pitch makes it suitable for space-constrained designs.
ADG419BRMZ
ADG419BRMZ by Analog Devices is a CMOS SPDT switch with 8 terminals and a max on-state resistance of 35 ohm. It operates at temperatures ranging from -40 to 85 °C and has a nominal voltage of +-15 V. This industrial-grade switch is ideal for applications requiring precise signal routing in compact electronic systems.
CD74HC4051E
Harris Semiconductor
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
CD4066BCM
Rochester Electronics
SPST; Temperature Grade: MILITARY; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SN74LVC1G66DBVT
SN74LVC1G66DBVT by Texas Instruments is a SPST switch with 5 terminals, operating at a voltage range of 1.65V to 5.5V. It offers low on-state resistance of 20 ohm and fast switching times of 6.5ns on and 6.9ns off, suitable for industrial applications requiring high-speed signal routing in compact spaces.
MAX4545EAP+
Analog Devices' MAX4545EAP+ is a 4-function audio/video switch with 20 terminals, operating at -40 to 85°C. It features a max on-state resistance of 20Ω, switching time of 150ns, and off-state isolation of 80dB. Ideal for industrial applications requiring high-speed signal routing in compact designs.
MAX339CSE+
MAX339CSE+ by Analog Devices is a 4-channel differential multiplexer with CMOS technology. It operates at -20V to +20V, with 400 ohm max on-state resistance and 500ns switch-on/off time. Ideal for applications requiring small outline packages and high off-state isolation of 75dB.
DG212CJ
General Electric Solid State
SPST; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
74HC4052D
Philips Semiconductors
DIFFERENTIAL MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADG408BRUZ
ADG408BRUZ by Analog Devices is an 8-channel CMOS multiplexer with a max on-state resistance of 100 ohm and switching voltage of +-15 V. It operates in industrial temperature range, has a dual terminal position, and is suitable for applications requiring high-speed signal switching.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADG819BRMZ
ADG819BRMZ by Analog Devices is an 8-terminal SPDT switch with a max on-state resistance of 1.4 ohm and nominal off-state isolation of 71 dB. This CMOS technology-based switch operates at a temperature range from -40 to 125 °C, making it suitable for automotive applications requiring fast switching times and low resistance.
ADG849YKSZ-500RL7
ADG849YKSZ-500RL7 by Analog Devices is a SPDT switch with 6 terminals, operating at -40 to 125 °C. It has a max on-state resistance of 0.6 ohm and switching time of 15 ns. Ideal for automotive applications requiring high-speed signal routing in compact spaces.
ADG811YRUZ
ADG811YRUZ by Analog Devices is a CMOS SPST switch with 4 functions, 0.72 ohm Ron, and 30 ns switch-on time. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and 67 dB isolation level. Package style: small outline, thin profile, shrink pitch.
ADG819BRTZ-500RL7
SPDT; Temperature Grade: AUTOMOTIVE; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADG849YKSZ-REEL7
ADG849YKSZ-REEL7 by Analog Devices is a SPDT switch with 6 terminals, operating at -40 to 125 °C. It has a max on-state resistance of 0.6 ohm and switching time of 15 ns. Ideal for automotive applications due to its compact size and high isolation capabilities.
ADG858BCPZ-REEL7
ADG858BCPZ-REEL7 by Analog Devices is a CMOS SPDT multiplexer with 4 functions, 2 channels, and a nominal supply voltage of 2.7V. It has a small package size of 2.1mm x 2.1mm and operates in industrial temperature range. Suitable for applications that require fast switching and low on-state resistance.
ADG849YKSZ-REEL
ADG849YKSZ-REEL by Analog Devices is a SPDT switch with 6 terminals, operating at -40 to 125 °C. It has a max on-state resistance of 0.6 ohm and switching time of 15 ns. Ideal for automotive applications due to its compact size, low power consumption, and high isolation level.
ADG819BRTZ-REEL7
ADG819BRTZ-REEL7 by Analog Devices is a SPDT multiplexer with 1 channel, operating at temperatures from -40 to 125 °C. It has a max on-state resistance of 1.4 ohm and switching voltage of 3/5 V, making it suitable for automotive applications requiring low-profile switches with fast response times.
ADG884BRMZ
ADG884BRMZ by Analog Devices is a CMOS audio/video switch with 2 functions, 0.5 ohm Ron, and 60 dB isolation. It operates b/w -40 to 85 °C and has a supply voltage range of 1.8V to 5.5V. Ideal for industrial applications requiring fast switching times and low on-state resistance.
ADG884BRMZ-REEL7
ADG884BRMZ-REEL7 by Analog Devices is a CMOS audio/video switch with 2 functions, 0.5 ohm max on-state resistance, and 60 dB nominal off-state isolation. It operates b/w -40 to 85 °C and has a supply voltage range of 1.8V to 5.5V. Ideal for industrial applications requiring fast switching times and high isolation levels.
ADG801BRTZ-500RL7
ADG801BRTZ-500RL7 by Analog Devices is a SPST switch with 0.6 ohm Ron, 55 ns switch-on time, and 61 dB isolation. Ideal for automotive applications due to its CMOS technology, low profile design, and wide operating temperature range from -40 to 125 °C.
ADG819BRTZ-REEL
ADG819BRTZ-REEL by Analog Devices is a SPDT switch with 6 terminals, operating at a supply voltage range of 1.8V to 5.5V. It offers a max on-state resistance of 1.4 ohm and nominal off-state isolation of 71 dB, making it ideal for automotive applications requiring fast switching times and low power consumption. The switch features a small outline package with dual terminal position and Gull Wing form, suitable for surface mount PCB designs in temperature-sensitive environments.
ADG884BRMZ-REEL
AUDIO/VIDEO SWITCH; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
ADG804YRMZ
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
ADG839YKSZ-REEL7
ADG839YKSZ-REEL7 by Analog Devices is a SPDT switch with 6 terminals, operating at -40 to 125 °C. It has a max on-state resistance of 0.5 ohm and switching time of 18 ns. Ideal for automotive applications due to its compact size, low power consumption, and high isolation level.
ADG802BRTZ-REEL7
ADG802BRTZ-REEL7 by Analog Devices is a CMOS SPST switch with 6 terminals, 0.6 ohm Ron, and 55 ns switch-on time. Ideal for automotive applications due to its low profile design, -40 to 125 °C operating temperature range, and 61 dB isolation.
ADG804YRMZ-REEL7
ADG804YRMZ-REEL7 by Analog Devices is a CMOS single-ended multiplexer with 4 channels. It operates at a supply voltage range of 1.65V to 3.6V and offers a max on-state resistance of 0.77 ohm. With a small outline package style, it is ideal for automotive applications requiring fast switching times and high isolation levels.
ADG888YRUZ
DPDT; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADG821BRMZ
SPST; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
ADG804YRMZ-REEL
ADG804YRMZ-REEL by Analog Devices is a CMOS multiplexer with 4 channels, 0.77 ohm max resistance, and 30 ns switch-on time. Ideal for automotive applications due to its small outline package and low power consumption of 0.004 mA at 2.5 V supply voltage.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved