Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ADC, FLASH METHOD; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
Median Price
$48.260
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Farnell
1+ parts
$36.210
100+ parts
-
1k+ parts
10k+ parts
Chip1Stop
$40.700
$32.500
Analog Devices Inc
$30.050
Mouser Electronics
$57.940
$42.490
DigiKey
$58.050
$44.602
$42.492
Element14
$64.160
$50.240
Verical
$34.830
Digiode
$38.665
Vyrian
Cyclops Electronics Ltd
Parana Technologies
$22.588
$21.007
IDEA Electronic Components Group
$24.288
$23.074
Corphita
$36.630
DigiPath Technology Company
$37.889
$36.374
Vigor
$39.520
Continental Prestige Electronics
$44.180
$35.790
Native Components
$113.550
$109.008
Northwest PG Solutions
$124.905
iodParts Technologies Inc.
A-Z Elektronik GmbH
RC Electronics
Perfect Parts
Analog-to-Digital Converters AD9634BCPZ-170 attributes and parameters. Explore more Analog-to-Digital Converters devices from Analog Devices
Converter Type:
No. of Analog In Channels:
No. of Functions:
No. of Bits:
Sub-Category:
Output Bit Code:
Output Format:
Maximum Linearity Error (EL):
Sample Rate:
Hold Mode:
Maximum Conversion Time:
Power Supplies:
Minimum Analog Input Voltage:
Maximum Analog Input Voltage:
Nominal Supply Voltage:
Moisture Sensitivity Level (MSL):
Minimum Operating Temperature:
Maximum Operating Temperature:
Temperature Grade:
Peak Reflow Temperature:
Maximum Time At Peak Reflow Temperature:
Terminal Position:
No. of Terminals:
Terminal Form:
Terminal Pitch:
Surface Mount:
Width:
Length:
Maximum Seated Height:
Package Style:
Package Shape:
Package Equivalence Code:
Package Code:
JESD-30 Code:
Qualified:
JESD-609 Code:
AD9634BCPZ-170 Converters trade compliance attributes, and parameters.
ECCN
3A991.C.2
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
LL4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Changzhou Starsea Electronics
LM555CMX
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Telefunken
MBRS140T3G
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
2N7002
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
261
Deltrol Controls
Other Relays;
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
PIC18F4550-I/P
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
1N4148WT
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
1N4148
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
ADS1015BQDGSRQ1
Texas Instruments
Texas Instruments' ADS1015BQDGSRQ1 is a 12-bit ADC with 4 analog in channels, operating from -40 to 125 °C. It has a 0.0033 MHz sample rate and 0.0122% max linearity error, suitable for automotive applications due to AEC-Q100 screening level. The small outline package with gull wing terminals makes it ideal for space-constrained designs.
ADS1251U/2K5G4
Texas Instruments ADS1251U/2K5G4 is a 24-bit ADC with 0.0015% EL, 50us conversion time, and 0.02MHz sample rate. Ideal for industrial applications, it operates at -40 to 85°C with 5V supplies and serial output format.
LTC1867ACGN#PBF
Linear Technology
ADC, SUCCESSIVE APPROXIMATION; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR;
MCP3550-50E/MS
MCP3550-50E/MS by Microchip: 22-bit ADC with 0.0006% linearity error, 2.7/5V power supplies, and 0.0256 MHz sample rate. Ideal for automotive applications due to TS 16949 screening level and -40 to 125°C operating temperature range.
LTC1856CG#PBF
ADC, PROPRIETARY METHOD; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SSOP; Package Shape: RECTANGULAR;
LTC1865AIMS#PBF
LTC1865AIMS#PBF by Analog Devices is a 16-bit ADC with 0.0092% EL, 2 analog in channels, and 0.25 MHz sample rate. Ideal for industrial applications requiring precise analog-to-digital conversion in a compact form factor.
ADS114S08BIRHBT
ADS114S08BIRHBT by Texas Instruments is a 16-bit ADC with 12 analog input channels, 0.0025% linearity error, and 0.406 us conversion time. Ideal for automotive applications due to its compact size (5x5 mm), low supply voltage of 2.7 V, and wide operating temperature range (-40 to 125 °C).
ADC122S021CIMM/NOPB
National Semiconductor
ADC, SUCCESSIVE APPROXIMATION; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
AD7686BRMZ
AD7686BRMZ by Analog Devices is a 16-bit ADC with 0.0046% EL, 5V supply, and 0.5 MHz sample rate. Ideal for industrial applications, it features a small outline package with dual terminals and operates in temperatures ranging from -40 to 85°C.
ADS124S06IPBS
Texas Instruments ADS124S06IPBS is a 24-bit ADC with 6 analog in channels, operating from -50 to 125°C. It features a sample rate of 0.004 MHz, outputting in serial format. Ideal for automotive applications due to its thin profile and low supply current of 0.18 mA.
ADS114S08IPBSR
Texas Instruments ADS114S08IPBSR is a 16-bit ADC with 12 analog channels, 0.0015% linearity error, and 0.004 MHz sample rate. Ideal for automotive applications, it operates from -50 to 125 °C with a supply voltage of 2.7-3.3 V. Package style is flatpack with thin profile and fine pitch terminals.
LTC1867CGN#PBF
LTC2450IDC#TRMPBF
LTC2450IDC#TRMPBF by Analog Devices is a 16-bit ADC with 0.0153% EL, 42000us conversion time, and 5.5V max analog input voltage. Ideal for industrial applications requiring precise analog-to-digital conversion in a compact form factor.
ADS1148IPW
The Texas Instruments ADS1148IPW is a 16-bit ADC with 8 analog input channels, operating at a max conversion time of 0.002 us. Ideal for industrial applications, it offers a max linearity error of 0.0015%, operates in temperatures ranging from -40 to 105 °C, and has a supply voltage range of 2.7-5 V.
AD7687BRMZRL7
AD7687BRMZRL7 by Analog Devices is a 16-bit ADC with a max linearity error of 0.0023%. It operates at temperatures ranging from -40 to 85 °C and has a sample rate of 0.25 MHz. This converter is commonly used in industrial applications requiring precise analog-to-digital conversion.
AD7328BRUZ
AD7328BRUZ by Analog Devices is a 12-bit ADC with 8 analog input channels, operating at a sample rate of 1 MHz. It features a max linearity error of 0.0269% and supports industrial temperature grades. Ideal for applications requiring precise analog-to-digital conversion in harsh environments.
LTC1867ACGN#TRPBF
ADS7844EBG4
Texas Instruments ADS7844EBG4 is a 12-bit ADC with 8 analog channels, 0.0244% linearity error, and 0.75us conversion time. Ideal for industrial applications requiring high precision data acquisition in a compact form factor. Operates at -40 to 85°C with a sample rate of 0.2MHz and serial output format.
ADS8339IDGST
The Texas Instruments ADS8339IDGST is a 16-bit ADC with 0.0031% EL, 0.25 MHz sample rate, and 3.3 us conversion time. Ideal for industrial applications requiring precise analog-to-digital conversion in a compact package with small outline and low power consumption.
AD7708BRUZ-REEL7
AD7708BRUZ-REEL7 by Analog Devices is a 16-bit ADC with 10 analog input channels. It operates at -40 to 85°C, with a max linearity error of 0.0015%. Suitable for industrial applications, it has a supply voltage of 3V and outputs data in serial format.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD9656BCPZ-125
AD9656BCPZ-125 by Analog Devices is a 16-bit ADC with 4 analog input channels and a sample rate of 125 MHz. It operates in an industrial temperature range and is suitable for applications requiring high-speed data conversion, such as communications and instrumentation.
AD9689BBPZ-2000
AD9689BBPZ-2000 by Analog Devices is a 14-bit ADC with a sample rate of 2000 MHz. It has a max analog input voltage of 2V and is commonly used in industrial applications for high-speed data conversion.
AD9650BCPZ-105
Analog Devices' AD9650BCPZ-105 is a 16-bit ADC with 2 analog in channels, 105 MHz sample rate, and 0.0092% max linearity error. Ideal for industrial applications requiring high-speed data conversion, it operates b/w -40 to 85°C with a supply voltage of 1.8V. The chip carrier package has a very thin profile and quad terminal position for compact designs.
AD9684BBPZ-500
ADC, PROPRIETARY METHOD; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 196; Package Code: LFBGA; Package Shape: SQUARE;
AD9650BCPZ-65
ADC, FLASH METHOD; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 64; Package Code: HVQCCN; Package Shape: SQUARE;
AD9613BCPZ-170
AD9633BCPZ-80
ADC, FLASH METHOD; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
AD9680BCPZ-1000
ADC, PROPRIETARY METHOD; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 64; Package Code: HVQCCN; Package Shape: SQUARE;
AD9650BCPZ-80
AD9613BCPZ-250
AD9613BCPZ-250 by Analog Devices is a 12-bit ADC with 2 analog input channels and a sample rate of 250 MHz. It is used in applications requiring high-speed data conversion, such as communication systems and instrumentation.
AD9650BCPZ-25
AD9650BCPZ-25 by Analog Devices is a 16-bit ADC with 2 analog input channels. It operates at a sample rate of 25 MHz and has a max linearity error of 0.0046%. This converter is commonly used in industrial applications requiring high-speed and accurate analog-to-digital conversion.
AD9680BCPZ-500
AD9680BCPZ-500 by Analog Devices is a 14-bit ADC with 2 analog in channels, 500 MHz sample rate, and 0.0305% max linearity error. It is used in industrial applications for high-speed data conversion with a max analog input voltage of ±2.06 V and operates b/w -40°C to 85°C.
AD9640BCPZ-105
AD9640BCPZ-105 by Analog Devices is a 14-bit ADC with 2 analog input channels and a sample rate of 105 MHz. It operates at temperatures ranging from -40 to 85 °C and is commonly used in industrial applications requiring high-speed data conversion.
AD9653BCPZ-125
AD9650BCPZRL7-25
AD9684BBPZRL7-500
AD9684BBPZRL7-500 by Analog Devices is a 14-bit ADC with 2 analog in channels, 1250 MHz sample rate, and 0.0305% max linearity error. It is used in industrial applications for high-speed data conversion, featuring a low-profile grid array package suitable for surface mount assembly.
AD9649BCPZRL7-20
AD9635BCPZ-125
AD9689BBPZ-2600
ADC, PROPRIETARY METHOD; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 196; Package Code: HBGA; Package Shape: SQUARE;
AD9609BCPZ-80
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved