Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
AD9512UCPZ-EP clock driver by Analog Devices offers 0.695 ns propagation delay, 3.3V nominal voltage, and 1.76 ns propagation delay. Ideal for applications requiring precise timing control in a compact square package with differential input conditioning.
Median Price
$34.315
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$34.440
1k+ parts
$30.810
10k+ parts
$29.000
Arrow
$34.190
Verical
Bristol Electronics
$31.380
$27.614
Digiode
$34.162
Vyrian
AZTECH Wire
$9.980
Andel Nordic
$12.250
$8.575
Vigor
$25.550
Semicontronic
$25.700
$25.058
$24.929
Parana Technologies
$31.002
$28.831
Corphita
$32.364
IDEA Electronic Components Group
$33.335
$31.668
DigiPath Technology Company
$52.003
$49.922
Native Components
$58.680
$56.333
Northwest PG Solutions
$64.548
Microchip USA
$91.310
Authorized Procurement Solutions
Perfect Parts
Low propagation delay of 0.695 ns ensures fast and efficient signal processing.
Surface mount capability allows for easy and convenient integration onto PCBs.
Differential MUX input conditioning enhances signal integrity and reduces noise interference.
Square package shape provides a compact and space-saving design.
Operating at a standard voltage of 3.3V ensures compatibility with common power supplies.
Utilizing CMOS technology offers low power consumption and high noise immunity.
With a maximum operating temperature of 85°C, the product can withstand high temperature environments.
Can operate efficiently even in extremely low temperature conditions of -55°C.
Clock Drivers & Buffers AD9512UCPZ-EP attributes and parameters. Explore more Clock Drivers & Buffers devices from Analog Devices
Family:
Input Conditioning:
JESD-30 Code:
JESD-609 Code:
Length:
Logic IC Type:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Inverted Outputs:
No. of Terminals:
No. of True Outputs:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Propagation Delay At Nominal Supply:
Propagation Delay (tpd):
Qualification:
Maximum Same Edge Skew (tskwd):
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
Minimum fmax:
AD9512UCPZ-EP Logic ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Assembly Site Add 6/Feb/2017
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
MMBT3904LT1G
Onsemi
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
LL4148
Rectron
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N2222A
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Unitrode
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
BAV99
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
FDC5614P
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ULN2803A
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
49FCT3805AQGI
Integrated Device Technology
LOW SKEW CLOCK DRIVER; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR; Output Characteristics: 3-STATE;
CDCLVC1112PW
Texas Instruments
CDCLVC1112PW clock driver by Texas Instruments features a propagation delay of 2 ns, operates at a supply voltage range of 2.3V to 3.3V, and has a max frequency of 250 MHz. Ideal for industrial applications requiring precise clock signal distribution in compact designs.
LMK03318RHSR
LMK03318RHSR clock driver by Texas Instruments operates at 3.3V with 48 terminals in a square package style. It features differential mux input conditioning, 16 true outputs, and a min operating temperature of -40°C. Ideal for industrial applications requiring precise timing control and signal synchronization.
74FCT3807PYGI8
Clock Drivers; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
5PB1102PGGI8
LOW SKEW CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR;
IDT74FCT3807PYG8
LOW SKEW CLOCK DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SSOP; Package Shape: RECTANGULAR;
74FCT38074SDCGI
Renesas Electronics
Renesas Electronics' 74FCT38074SDCGI is a Clock Driver & Buffer with 4.5ns Propagation Delay, suitable for industrial applications. It operates at a voltage range of 1.71V to 3.465V and has a temperature range of -40°C to 105°C. This small outline package with dual terminals is designed for surface mount assembly, making it ideal for compact electronic devices.
AD9508BCPZ-REEL7
Analog Devices
AD9508BCPZ-REEL7 by Analog Devices is a Clock Driver with 3.07 ns Propagation Delay, suitable for applications requiring fast signal processing. It operates at a Nominal Voltage of 2.5V and offers Differential MUX Input Conditioning, making it ideal for industrial temperature environments. With 8 True Outputs and a Min fmax of 1650 MHz, this CMOS technology-based driver ensures high-speed performance in various electronic systems.
9DBV0441AKILF
PLL BASED CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
8305AGLFT
LOW SKEW CLOCK DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
ZL40213LDG1
ZL40213LDG1 by Microchip offers 2ns propagation delay, operates at -40 to 85°C, and has 16 terminals. Ideal for clock drivers & buffers, it features differential input conditioning and a square package shape. With a supply voltage of 2.5V, this CMOS technology chip carrier is surface mountable.
IDT74FCT38074DCGI8
LOW SKEW CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ICS9112AM-16LF-T
Renesas Electronics' ICS9112AM-16LF-T is a clock driver with 4 true outputs, operating at max 133 MHz. It features a small outline package with dual terminals and matte tin finish. Ideal for applications requiring precise timing synchronization in commercial-grade environments.
ZL40222LDG1
ZL40222LDG1 Clock Driver by Microchip: 2.5V supply, 2ns propagation delay, 16 true outputs. Ideal for industrial applications requiring differential mux input conditioning in a compact square package with quad terminals and low power consumption.
IDT2308B-1DCGI8
The Renesas Electronics IDT2308B-1DCGI8 clock driver features 16 terminals, 3.3V nominal voltage, and 30pF load capacitance. With a max operating temperature of 85°C, it is ideal for industrial applications requiring high-speed signal synchronization and low power consumption. The small outline package with gull wing terminals makes it suitable for surface mount PCB designs in various electronic devices.
851S201CKILF
LOW SKEW CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE;
MC100E111FNG
MC100E111FNG clock driver by Onsemi features 0.66ns propagation delay, 5V nominal voltage, and -40 to 85°C operating temperature range. Ideal for industrial applications requiring differential input conditioning and 3-STATE output characteristics in a square chip carrier package.
NB6L14MNR2G
NB6L14MNR2G clock driver by Onsemi features differential input conditioning, 0.35 ns propagation delay, and 4 true outputs. It is a surface-mount chip carrier suitable for industrial applications requiring precise timing at temperatures ranging from -40 to 85°C.
SY56020RMG-TR
Micrel
CY2308SXC-1H
Cypress Semiconductor
PLL BASED CLOCK DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
AD9517-4ABCPZ-RL7
PLL BASED CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
AD9517-4ABCPZ
AD9517-4ABCPZ clock driver by Analog Devices offers 1.18 ns propagation delay, 3.3V nominal voltage, and 8 true outputs at up to 2950 MHz. Ideal for applications requiring differential mux input conditioning in industrial temperature environments with a package style of chip carrier and very thin profile.
AD9528BCPZ-REEL7
AD9528BCPZ-REEL7 by Analog Devices is a clock driver with 72 terminals, operating from -40 to 85°C. It offers differential mux input conditioning, 28 true outputs up to 1000 MHz. Ideal for industrial applications requiring precise clock distribution in a compact chip carrier package.
AD9528BCPZ
PLL BASED CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 72; Package Code: HVQCCN; Package Shape: SQUARE;
AD9517-1ABCPZ
CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
AD9514BCPZ
CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
AD9517-3ABCPZ
AD9511BCPZ
AD9511BCPZ by Analog Devices is a clock driver with a propagation delay of 1.76 ns and operates at a nominal voltage of 3.3V. It is surface mountable and commonly used in industrial applications requiring precise timing synchronization.
AD9508BCPZ
LOW SKEW CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
AD9512BCPZ
AD9512BCPZ clock driver by Analog Devices has a propagation delay of 0.695 ns and operates at a supply voltage of 3.3V. With 48 terminals, it offers differential mux input conditioning and supports up to 1200 MHz frequency, making it ideal for industrial applications requiring precise timing control.
AD9514BCPZ-REEL7
AD9510BCPZ
PLL BASED CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 64; Package Code: HVQCCN; Package Shape: SQUARE;
AD9512BCPZ-REEL7
LOW SKEW CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
AD9517-1ABCPZ-RL7
AD9517-1BCPZ-REEL7
AD9517-3ABCPZ-RL7
AD9513BCPZ-REEL7
AD9513BCPZ-REEL7 by Analog Devices is a Clock Driver with 2.01 ns Propagation Delay, suitable for applications requiring fast signal processing. It operates at a Nominal Voltage of 3.3V and offers Differential Input Conditioning. With a compact Square Package Shape and Surface Mount capability, it is ideal for industrial-grade systems needing precise timing control up to 800 MHz.
AD9511BCPZ-REEL7
AD9513BCPZ
AD9513BCPZ clock driver by Analog Devices features a propagation delay of 2.01 ns, differential input conditioning, and operates at a supply voltage of 3.3V. With a package style including chip carrier and very thin profile, it is ideal for industrial applications requiring high-speed clock distribution.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved