Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
AD9022AZ by Analog Devices is a 12-bit ADC with a max linearity error of 0.0732%. Operating at a sample rate of 20 MHz, it has a small outline package style and uses bipolar technology. Ideal for applications requiring precise analog-to-digital conversion in temperature-sensitive environments.
Median Price
$111.015
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$102.870
1k+ parts
$92.040
10k+ parts
$86.620
DigiKey
$119.160
Digiode
$108.851
DigiKey Marketplace
Vyrian
ECAB
North Shore Components
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
Advanced Electronics
$10.151
$10.049
$9.643
Parana Technologies
$22.790
$21.194
IDEA Electronic Components Group
$24.505
$23.280
DigiPath Technology Company
$38.228
$36.699
Corphita
$103.122
Vigor
$109.990
Northwest PG Solutions
$3.993
Native Components
$3.953
This material ensures durability and reliability, making the product suitable for a variety of applications.
Easy to install and saves space on PCB.
Provides high resolution and accuracy in converting analog signals to digital.
Offers flexibility in connecting the converter to other components in the system.
Can operate in a wide range of environmental conditions.
Fast sampling rate allows for quick and accurate conversion of signals.
Provides high accuracy and stability in converting analog signals.
Output format that is commonly used and easy to interface with other digital components.
Suitable for sending digital data in parallel format, which can be more efficient for certain applications.
Track and hold functionality ensures that the analog signal is accurately captured during conversion.
Analog-to-Digital Converters AD9022AZ attributes and parameters. Explore more Analog-to-Digital Converters devices from Analog Devices
Converter Type:
No. of Analog In Channels:
No. of Functions:
No. of Bits:
Sub-Category:
Output Bit Code:
Output Format:
Maximum Linearity Error (EL):
Sample Rate:
Hold Mode:
Power Supplies:
Minimum Analog Input Voltage:
Maximum Analog Input Voltage:
Nominal Supply Voltage:
Nominal Negative Supply Voltage:
Minimum Operating Temperature:
Maximum Operating Temperature:
Temperature Grade:
Terminal Position:
No. of Terminals:
Terminal Form:
Terminal Pitch:
Surface Mount:
Width:
Length:
Maximum Seated Height:
Package Body Material:
Package Style:
Package Shape:
Package Equivalence Code:
Package Code:
JESD-30 Code:
Qualified:
JESD-609 Code:
AD9022AZ Converters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
FDN5618P
Onsemi
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
BAV99
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
LM555CN
Rochester Electronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
1N4148
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
Texas Instruments
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
MMBT3906LT1G
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Comchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
Synsemi
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138LT1G
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
Shenzhen Socay Electronics
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
MAX1302BEUG
Maxim Integrated
MAX1302BEUG by Maxim Integrated is a 16-bit ADC with 8 analog in channels, 0.0061% EL, and 5V power supply. Ideal for industrial applications, it features a sample rate of 0.114 MHz and operates b/w -40 to 85°C. The converter type is successive approximation with a serial output format.
ADS114S08IRHBR
Texas Instruments ADS114S08IRHBR is a 16-bit ADC with 12 analog in channels, 0.0015% EL, and 0.406 us conversion time. Ideal for automotive applications due to its -50 to 125 °C operating temperature range and 3.3 V nominal voltage. Package style: CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE.
AD7191BRUZ-REEL
Analog Devices
AD7191BRUZ-REEL by Analog Devices is a 24-bit ADC with 0.001% linearity error, operating at 3/5V. It has a sample rate of 0.0048 MHz and supports binary and offset binary output codes. Ideal for industrial applications requiring precise analog-to-digital conversion in compact designs.
ADS7809UB
The Texas Instruments ADS7809UB is a 16-bit ADC with 0.0031% linearity error, 5V power supply, and 0.1 MHz sample rate. Ideal for industrial applications, it features a CMOS technology, binary output format, and small outline package style.
MCP3221A7T-E/OT
Microchip Technology
MCP3221A7T-E/OT by Microchip: 12-bit ADC with 0.0488% linearity error, 3/5V power supplies. Ideal for automotive applications due to TS 16949 screening, small outline package, and -40 to 125°C operating range. Sample rate of 0.0223 MHz in a CMOS technology with serial output format.
AD7665ASTZRL
The Analog Devices AD7665ASTZRL is a 16-bit ADC with 4 analog input channels, 0.0038% linearity error, and 0.57 MHz sample rate. Ideal for industrial applications requiring precise analog-to-digital conversion in a compact square package with low profile and fine pitch terminals.
LTC2333ILX-16#PBF
LTC2333ILX-16#PBF by Analog Devices is a 16-bit ADC with 8 analog in channels, 0.00458% EL, and 0.8 MHz sample rate. Ideal for industrial applications requiring high precision conversion within -40 to 85 °C temperature range. Package style: Flatpack, low profile, fine pitch.
ADS1240E/1KG4
The Texas Instruments ADS1240E/1KG4 is a 24-bit ADC with 4 analog in channels, 0.0015% max linearity error, and 3/5V power supplies. Ideal for industrial applications requiring high precision data acquisition at temperatures ranging from -40 to 85°C.
AD7794BRUZ
AD7794BRUZ by Analog Devices is a 24-bit ADC with 6 analog in channels, 0.0015% max linearity error, and 3/5V power supplies. It's used in industrial applications for precise data conversion due to its high resolution and low linearity error.
LTC1867LCGN#PBF
LTC1867LCGN#PBF by Analog Devices is a 16-bit ADC with 8 analog input channels, 0.0061% linearity error, and 0.175 MHz sample rate. Ideal for industrial automation systems, data acquisition applications, and sensor interfaces due to its small outline package and high conversion speed.
ADS131M08IPBSR
Texas Instruments ADS131M08IPBSR is a 24-bit ADC with 8 analog in channels, operating from -40 to 125°C. It features a sample rate of 0.004 MHz, outputting data in binary format via serial interface. Ideal for automotive applications due to its thin profile and fine pitch package style.
LTC1865LCMS#PBF
LTC1865LCMS#PBF by Analog Devices is a 16-bit ADC with 0.0122% EL, 2 analog in channels, and 0.15 MHz sample rate. Ideal for applications requiring precise analog-to-digital conversion like industrial automation and data acquisition systems.
ADS8568SPM
The Texas Instruments ADS8568SPM is a 16-bit ADC with 8 analog input channels, 0.0069% linearity error, and 0.5 MHz sample rate. Ideal for automotive applications, it operates at -40 to 125°C, has a max conversion time of 1.7 us, and supports binary output format.
ADS1299IPAG
The Texas Instruments ADS1299IPAG is an 8-channel ADC with 24-bit resolution and 0.0008% linearity error. Operating at a sample rate of 0.016 MHz, it supports analog input voltages from -4.5V to 4.5V. Ideal for industrial applications requiring precise analog-to-digital conversion in a compact square package with gull wing terminals.
ADS7844EB/2K5G4
Texas Instruments ADS7844EB/2K5G4 is a 12-bit ADC with 8 analog in channels, 0.0244% linearity error, and 0.125 MHz sample rate. Ideal for industrial applications, it operates b/w -40 to 85°C with a supply voltage of 2.7V or 3/5V.
LTC1286CS8#PBF
LTC1286CS8#PBF by Analog Devices is a 12-bit ADC with 0.0488% EL, 0-70°C temp range, and 5.05V max analog input voltage. Ideal for commercial applications, it features a small outline package, 0.0125 MHz sample rate, and operates on 5V nominal voltage.
LTC2440CGN#PBF
Linear Technology
ADC, DELTA-SIGMA; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR;
ADS1255IDBTG4
Texas Instruments ADS1255IDBTG4 is a 24-bit ADC with 0.001% EL, 2 analog in channels, and 0.03 MHz sample rate. Ideal for industrial applications requiring precise analog-to-digital conversion in a compact package.
ADS131M02IRUKR
Texas Instruments ADS131M02IRUKR is a 24-bit ADC with 0.0006% EL, 2 analog in channels, and 0.064 MHz sample rate. Ideal for automotive applications, it operates b/w -40 to 125 °C with a supply voltage of 1.65-3.6 V. Package style: CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE.
ADS124S06IPBS
Texas Instruments ADS124S06IPBS is a 24-bit ADC with 6 analog in channels, operating from -50 to 125°C. It features a sample rate of 0.004 MHz, outputting in serial format. Ideal for automotive applications due to its thin profile and low supply current of 0.18 mA.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
AD9042ASTZ
ADC, PROPRIETARY METHOD; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 44; Package Code: LQFP; Package Shape: SQUARE;
AD9042AST
AD9058ATJ/883B
ADC, PROPRIETARY METHOD; Temperature Grade: MILITARY; Terminal Form: J BEND; No. of Terminals: 44; Package Code: QCCJ; Package Shape: SQUARE;
AD9057BRSZ-40
Analog Devices' AD9057BRSZ-40 is an 8-bit ADC with a 40 MHz sample rate, 0.7812% linearity error, and operates at -40 to 85°C. Ideal for industrial applications requiring high-speed data conversion, it features a parallel output format and BICMOS technology in a small outline package.
AD9057BRSZ-80
ADC, FLASH METHOD; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SSOP; Package Shape: RECTANGULAR;
AD9051BRSZ
ADC, PROPRIETARY METHOD; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SSOP; Package Shape: RECTANGULAR;
AD9002SD
ADC, FLASH METHOD; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR;
AD9002AD
ADC, FLASH METHOD; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR;
AD9002SE
ADC, FLASH METHOD; Temperature Grade: MILITARY; Terminal Form: NO LEAD; No. of Terminals: 28; Package Code: QCCN; Package Shape: SQUARE;
AD9002SE/883B
AD9000JE
A/D CONVERTER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 28; Package Code: QCCN; Package Shape: SQUARE;
AD9000SDB
A/D CONVERTER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
AD9002AN
AD9002BP
ADC, FLASH METHOD; Temperature Grade: OTHER; Terminal Form: J BEND; No. of Terminals: 28; Package Code: QCCJ; Package Shape: SQUARE;
AD9000SQ/883B
AD9002SD/883B
AD9000SD/883B
ADC, FLASH METHOD; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
AD9002AP
AD9000SE
AD9002BD
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved